[PATCH 2/2] Add support for the Crystalfontz CFA-10036 board
Sascha Hauer
s.hauer at pengutronix.de
Tue Jul 3 14:12:04 EDT 2012
Hi Maxime,
The patch looks good. I can apply it as is if you wish to or wait until
you had a look at the new defenv.
Sascha
On Mon, Jul 02, 2012 at 04:14:54PM +0200, Maxime Ripard wrote:
> This patch adds initial support for the CFA-10036 module.
>
> The module basically has a iMX28 SoC, plus a micro-SD slot, 3 pins to
> access the DUART, a USB OTG port, a OLED screen using the Solomon
> SSD1307 controller over I2C and a 200-pins SODIMM port to plug an
> expansion board.
>
> Support for this board and the additional devices will come
> eventually.
>
> For now, only the DUART and the MMC controller are used.
>
> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Cc: Brian Lilly <brian at crystalfontz.com>
> ---
> arch/arm/Makefile | 1 +
> arch/arm/boards/crystalfontz-cfa10036/Makefile | 1 +
> arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 106 ++++++++++++++++++++++
> arch/arm/boards/crystalfontz-cfa10036/config.h | 16 ++++
> arch/arm/boards/crystalfontz-cfa10036/env/config | 47 ++++++++++
> arch/arm/configs/cfa10036_defconfig | 40 ++++++++
> arch/arm/mach-mxs/Kconfig | 7 ++
> 7 files changed, 218 insertions(+)
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/Makefile
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/config.h
> create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/config
> create mode 100644 arch/arm/configs/cfa10036_defconfig
>
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index bd684dc..b8280fe 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -118,6 +118,7 @@ board-$(CONFIG_MACH_MX23EVK) := freescale-mx23-evk
> board-$(CONFIG_MACH_CHUMBY) := chumby_falconwing
> board-$(CONFIG_MACH_TX28) := karo-tx28
> board-$(CONFIG_MACH_MX28EVK) := freescale-mx28-evk
> +board-$(CONFIG_MACH_CFA10036) := crystalfontz-cfa10036
> board-$(CONFIG_MACH_FREESCALE_MX51_PDK) := freescale-mx51-pdk
> board-$(CONFIG_MACH_FREESCALE_MX53_LOCO) := freescale-mx53-loco
> board-$(CONFIG_MACH_FREESCALE_MX53_SMD) := freescale-mx53-smd
> diff --git a/arch/arm/boards/crystalfontz-cfa10036/Makefile b/arch/arm/boards/crystalfontz-cfa10036/Makefile
> new file mode 100644
> index 0000000..75f0020
> --- /dev/null
> +++ b/arch/arm/boards/crystalfontz-cfa10036/Makefile
> @@ -0,0 +1 @@
> +obj-y += cfa10036.o
> diff --git a/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c b/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
> new file mode 100644
> index 0000000..e454afd
> --- /dev/null
> +++ b/arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
> @@ -0,0 +1,106 @@
> +/*
> + * Copyright (C) 2010 Juergen Beisert, Pengutronix <kernel at pengutronix.de>
> + * Copyright (C) 2011 Marc Kleine-Budde, Pengutronix <mkl at pengutronix.de>
> + * Copyright (C) 2011 Wolfram Sang, Pengutronix <w.sang at pengutronix.de>
> + * Copyright (C) 2012 Maxime Ripard, Free Electrons <maxime.ripard at free-electrons.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <environment.h>
> +#include <errno.h>
> +#include <fec.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <mci.h>
> +#include <io.h>
> +
> +#include <mach/clock.h>
> +#include <mach/imx-regs.h>
> +#include <mach/iomux-imx28.h>
> +#include <mach/mci.h>
> +
> +#include <asm/armlinux.h>
> +#include <asm/mmu.h>
> +
> +#include <mach/fb.h>
> +
> +#include <generated/mach-types.h>
> +
> +/* setup the CPU card internal signals */
> +static const uint32_t cfa10036_pads[] = {
> + /* duart */
> + FUNC(2) | PORTF(3, 2) | VE_3_3V,
> + FUNC(2) | PORTF(3, 3) | VE_3_3V,
> +
> + /* mmc0 */
> + SSP0_D0 | VE_3_3V | PULLUP(1),
> + SSP0_D1 | VE_3_3V | PULLUP(1),
> + SSP0_D2 | VE_3_3V | PULLUP(1),
> + SSP0_D3 | VE_3_3V | PULLUP(1),
> + SSP0_D4 | VE_3_3V | PULLUP(1),
> + SSP0_D5 | VE_3_3V | PULLUP(1),
> + SSP0_D6 | VE_3_3V | PULLUP(1),
> + SSP0_D7 | VE_3_3V | PULLUP(1),
> + SSP0_CMD | VE_3_3V | PULLUP(1),
> + SSP0_CD | VE_3_3V | PULLUP(1),
> + SSP0_SCK | VE_3_3V | BITKEEPER(0),
> + /* MCI slot power control 1 = off */
> + PWM3_GPIO | VE_3_3V | GPIO_OUT | GPIO_VALUE(0),
> +};
> +
> +static struct mxs_mci_platform_data mci_pdata = {
> + .caps = MMC_MODE_8BIT,
> + .voltages = MMC_VDD_32_33 | MMC_VDD_33_34, /* fixed to 3.3 V */
> + .f_min = 400 * 1000,
> + .f_max = 25000000,
> +};
> +
> +static int cfa10036_mem_init(void)
> +{
> + arm_add_mem_device("ram0", IMX_MEMORY_BASE, 128 * 1024 * 1024);
> +
> + return 0;
> +}
> +mem_initcall(cfa10036_mem_init);
> +
> +static int cfa10036_devices_init(void)
> +{
> + int i;
> +
> + /* initizalize muxing */
> + for (i = 0; i < ARRAY_SIZE(cfa10036_pads); i++)
> + imx_gpio_mode(cfa10036_pads[i]);
> +
> + /* enable IOCLK0 to run at the PLL frequency */
> + imx_set_ioclk(0, 480000000);
> + /* run the SSP unit clock at 100 MHz */
> + imx_set_sspclk(0, 100000000, 1);
> +
> + armlinux_set_bootparams((void *)IMX_MEMORY_BASE + 0x100);
> + armlinux_set_architecture(MACH_TYPE_CFA10036);
> +
> + add_generic_device("mxs_mci", 0, NULL, IMX_SSP0_BASE, 0,
> + IORESOURCE_MEM, &mci_pdata);
> +
> + return 0;
> +}
> +device_initcall(cfa10036_devices_init);
> +
> +static int cfa10036_console_init(void)
> +{
> + add_generic_device("stm_serial", 0, NULL, IMX_DBGUART_BASE, 8192,
> + IORESOURCE_MEM, NULL);
> +
> + return 0;
> +}
> +console_initcall(cfa10036_console_init);
> diff --git a/arch/arm/boards/crystalfontz-cfa10036/config.h b/arch/arm/boards/crystalfontz-cfa10036/config.h
> new file mode 100644
> index 0000000..8f18fda
> --- /dev/null
> +++ b/arch/arm/boards/crystalfontz-cfa10036/config.h
> @@ -0,0 +1,16 @@
> +/*
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _CONFIG_H_
> +# define _CONFIG_H_
> +
> +#endif /* _CONFIG_H_ */
> diff --git a/arch/arm/boards/crystalfontz-cfa10036/env/config b/arch/arm/boards/crystalfontz-cfa10036/env/config
> new file mode 100644
> index 0000000..5d1bd48
> --- /dev/null
> +++ b/arch/arm/boards/crystalfontz-cfa10036/env/config
> @@ -0,0 +1,47 @@
> +#!/bin/sh
> +
> +hostname=cfa10036
> +#user=
> +
> +# use 'dhcp' to do dhcp in barebox and in kernel
> +# use 'none' if you want to skip kernel ip autoconfiguration
> +ip=none
> +
> +# or set your networking parameters here
> +#eth0.ipaddr=a.b.c.d
> +#eth0.netmask=a.b.c.d
> +#eth0.serverip=a.b.c.d
> +#eth0.gateway=a.b.c.d
> +#eth0.ethaddr=de:ad:be:ef:00:00
> +
> +# can be either 'tftp', 'nfs', 'nand', 'nor', 'file' or 'disk'
> +kernel_loc=file
> +# can be either 'net', 'nand', 'nor', 'file', 'disk' or 'initrd'
> +rootfs_loc=disk
> +# can be either 'nand', 'nor', 'nfs', 'tftp', 'disk', 'file' or 'empty'
> +oftree_loc=file
> +
> +# for flash based rootfs: 'jffs2' or 'ubifs'
> +# in case of disk any regular filesystem like 'ext2', 'ext3', 'reiserfs'
> +rootfs_type=ext3
> +# where is the rootfs in case of 'rootfs_loc=disk' (linux name)
> +rootfs_part_linux_dev=mmcblk0p3
> +rootfsimage=rootfs-${hostname}.$rootfs_type
> +
> +# where is the kernel image in case of 'kernel_loc=disk'
> +kernel_part=disk0.1
> +oftree_part=disk0.1
> +kernel_part_type=fat
> +kernel_part_type=fat
> +
> +kernelimage=zImage-$hostname
> +oftreeimage=oftree-$hostname
> +
> +bareboxenvimage=barebox-${hostname}.bin
> +
> +autoboot_timeout=3
> +
> +bootargs="console=ttyAMA0,115200"
> +
> +# set a fancy prompt (if support is compiled in)
> +PS1="\e[1;32mbarebox@\e[1;31m\h:\w\e[0m "
> diff --git a/arch/arm/configs/cfa10036_defconfig b/arch/arm/configs/cfa10036_defconfig
> new file mode 100644
> index 0000000..4c35c6b
> --- /dev/null
> +++ b/arch/arm/configs/cfa10036_defconfig
> @@ -0,0 +1,40 @@
> +CONFIG_ARCH_MXS=y
> +CONFIG_ARCH_IMX28=y
> +CONFIG_MACH_CFA10036=y
> +CONFIG_AEABI=y
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_MMU=y
> +CONFIG_TEXT_BASE=0x43000000
> +CONFIG_MALLOC_SIZE=0x800000
> +CONFIG_BROKEN=y
> +CONFIG_LONGHELP=y
> +CONFIG_GLOB=y
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/crystalfontz-cfa10036/env"
> +CONFIG_DEBUG_INFO=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_MTEST=y
> +CONFIG_CMD_MTEST_ALTERNATIVE=y
> +CONFIG_CMD_BOOTM_SHOW_TYPE=y
> +CONFIG_CMD_BOOTM_OFTREE=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_GPIO=y
> +# CONFIG_SPI is not set
> +CONFIG_MCI=y
> +CONFIG_MCI_STARTUP=y
> +CONFIG_MCI_MXS=y
> +CONFIG_FS_FAT=y
> +CONFIG_FS_FAT_LFN=y
> diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
> index 3348a3c..7502a01 100644
> --- a/arch/arm/mach-mxs/Kconfig
> +++ b/arch/arm/mach-mxs/Kconfig
> @@ -6,12 +6,14 @@ config ARCH_TEXT_BASE
> default 0x42000000 if MACH_CHUMBY
> default 0x47000000 if MACH_TX28
> default 0x47000000 if MACH_MX28EVK
> + default 0x47000000 if MACH_CFA10036
>
> config BOARDINFO
> default "Freescale i.MX23-EVK" if MACH_MX23EVK
> default "Chumby Falconwing" if MACH_CHUMBY
> default "Karo TX28" if MACH_TX28
> default "Freescale i.MX28-EVK" if MACH_MX28EVK
> + default "Crystalfontz CFA-10036" if MACH_CFA10036
>
> comment "Freescale i.MX System-on-Chip"
>
> @@ -64,6 +66,11 @@ config MACH_MX28EVK
> help
> Say Y here if you are using the Freescale i.MX28-EVK board
>
> +config MACH_CFA10036
> + bool "cfa-10036"
> + help
> + Say Y here if you are using the Crystalfontz CFA-10036 module
> +
> endchoice
>
> endif
> --
> 1.7.9.5
>
>
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list