[PATCH 6/8] ARM/Samsung: add the S3C6410 SoC
Juergen Beisert
jbe at pengutronix.de
Sat Jul 21 06:04:31 EDT 2012
After adding the base support, the CPU can now be enabled in the build system.
Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
---
arch/arm/Kconfig | 6 ++++++
arch/arm/mach-samsung/Kconfig | 21 ++++++++++++++++++++-
2 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2dbac66..4b7a39c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -79,6 +79,12 @@ config ARCH_S5PCxx
select CPU_V7
select GENERIC_GPIO
+config ARCH_S3C64xx
+ bool "Samsung S3C64xx"
+ select ARCH_SAMSUNG
+ select CPU_V6
+ select GENERIC_GPIO
+
config ARCH_VERSATILE
bool "ARM Versatile boards (ARM926EJ-S)"
select CPU_ARM926T
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 37d1aa3..8f63963 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -17,6 +17,8 @@ config BOARDINFO
config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
hex
default 0x1ff0 if ARCH_S5PCxx
+# TODO
+ default 0x2000 if ARCH_S3C64xx
config SAMSUNG_IMPROVED_UART
bool
@@ -87,6 +89,24 @@ endmenu
endif
+if ARCH_S3C64xx
+
+config CPU_S3C6410
+ select SAMSUNG_IMPROVED_UART
+ bool
+
+choice
+
+ prompt "S3C64xx Board Type"
+
+endchoice
+
+menu "Board specific settings "
+
+endmenu
+
+endif
+
if ARCH_S5PCxx
config CPU_S5PC110
@@ -106,7 +126,6 @@ config CPU_S5PV210
endif
-
menu "S3C Features "
config S3C_LOWLEVEL_INIT
--
1.7.10.4
More information about the barebox
mailing list