[PATCH 0/2] Misc Karo TX51 fixes

[Christian Kapeller]

The Karo TX51 port in the master tree is currently not booting. These patches
fix it by removing the 'kallsyms' config option.

Another issue fixed is unreliable resetting of the ethernet phy chip.

Christian Kapeller (2):
  tx51: ensure eth phy resets properly by driving reset pin explicitly.
  tx51: Disable kallsyms. It prevents the board from booting.

 arch/arm/boards/karo-tx51/tx51.c    |    8 +++++++-
 arch/arm/configs/tx51stk5_defconfig |    1 -
 2 files changed, 7 insertions(+), 2 deletions(-)

-- 
1.7.5.4