[PATCH 17/18] ARM/Samsung: add the S3C6410 SoC

[Juergen Beisert]

After adding the base support, the CPU can now be enabled in the build system.

Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
---
 arch/arm/Kconfig              |    6 ++++++
 arch/arm/mach-samsung/Kconfig |   21 ++++++++++++++++++++-
 drivers/serial/Kconfig        |    2 +-
 3 files changed, 27 insertions(+), 2 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9590db9..2e79005 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -81,6 +81,12 @@ config ARCH_S3C24xx
 #	select CPU_V7
 #	select GENERIC_GPIO
 
+config ARCH_S3C64xx
+	bool "Samsung S3C64xx"
+	select ARCH_SAMSUNG
+	select CPU_V6
+	select GENERIC_GPIO
+
 config ARCH_VERSATILE
 	bool "ARM Versatile boards (ARM926EJ-S)"
 	select CPU_ARM926T
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 28bbc97..8acb7c9 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -19,6 +19,8 @@ config BOARDINFO
 config ARCH_BAREBOX_MAX_BARE_INIT_SIZE
 	hex
 	default 0x1ff0 if ARCH_S5PCxx
+# TODO
+	default 0x2000 if ARCH_S3C64xx
 
 config SAMSUNG_IMPROVED_UART
 	bool
@@ -89,6 +91,24 @@ endmenu
 
 endif
 
+if ARCH_S3C64xx
+
+config CPU_S3C6410
+	select SAMSUNG_IMPROVED_UART
+	bool
+
+choice
+
+	prompt "S3C64xx Board Type"
+
+endchoice
+
+menu "Board specific settings       "
+
+endmenu
+
+endif
+
 if ARCH_S5PCxx
 
 config CPU_S5PC110
@@ -114,7 +134,6 @@ endchoice
 
 endif
 
-
 menu "S3C Features              "
 
 config S3C_LOWLEVEL_INIT
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a118aaf..283573e 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -90,7 +90,7 @@ config DRIVER_SERIAL_S3C_CLK
 	prompt "input clock reference"
 	depends on DRIVER_SERIAL_S3C
 	default 0 if ARCH_S3C24xx
-	default 3 if ARCH_S5PCxx
+	default 3 if ARCH_S3C64xx || ARCH_S5PCxx
 	help
 	  Select one of up to four available clock sources for the UART:
 	   0+1: PCLK, 2: UCLK0, 3: UCLK1
-- 
1.7.10.4