[PATCH 8/8] ARM/Samsung: add the Tiny6410 platform as a user of the S3C6410 SoC
Juergen Beisert
jbe at pengutronix.de
Sat Jul 28 11:10:50 EDT 2012
The Tiny6410 and its base board is a pure development platform.
Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
---
arch/arm/Makefile | 1 +
arch/arm/boards/friendlyarm-tiny6410/Kconfig | 19 ++++
arch/arm/boards/friendlyarm-tiny6410/Makefile | 3 +
arch/arm/boards/friendlyarm-tiny6410/config.h | 8 ++
.../friendlyarm-tiny6410/development-board.c | 100 ++++++++++++++++++++
arch/arm/boards/friendlyarm-tiny6410/env/config | 56 +++++++++++
arch/arm/boards/friendlyarm-tiny6410/tiny6410.c | 80 ++++++++++++++++
arch/arm/boards/friendlyarm-tiny6410/tiny6410.h | 14 +++
arch/arm/configs/friendlyarm_tiny6410_defconfig | 41 ++++++++
arch/arm/mach-samsung/Kconfig | 15 +++
10 files changed, 337 insertions(+)
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/Kconfig
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/Makefile
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/config.h
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/development-board.c
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/env/config
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/tiny6410.c
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/tiny6410.h
create mode 100644 arch/arm/configs/friendlyarm_tiny6410_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bd03fe6..ab3f730 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -124,6 +124,7 @@ board-$(CONFIG_MACH_FREESCALE_MX53_SMD) := freescale-mx53-smd
board-$(CONFIG_MACH_GUF_CUPID) := guf-cupid
board-$(CONFIG_MACH_MINI2440) := mini2440
board-$(CONFIG_MACH_MINI6410) := friendlyarm-mini6410
+board-$(CONFIG_MACH_TINY6410) := friendlyarm-tiny6410
board-$(CONFIG_MACH_QIL_A9260) := qil-a9260
board-$(CONFIG_MACH_TNY_A9260) := tny-a926x
board-$(CONFIG_MACH_TNY_A9263) := tny-a926x
diff --git a/arch/arm/boards/friendlyarm-tiny6410/Kconfig b/arch/arm/boards/friendlyarm-tiny6410/Kconfig
new file mode 100644
index 0000000..374820f
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/Kconfig
@@ -0,0 +1,19 @@
+if MACH_TINY6410
+
+choice
+ prompt "FriendlyARM Tiny6410 baseboard"
+ help
+ Since the Tiny6410 is a CPU card only, it requires a basebord to make
+ it work. Select here the baseboard Barebox should expect and
+ configure.
+
+config MACH_TINY6410_FA
+ bool
+ select HAS_DM9000
+ prompt "FA development platform"
+ help
+ FriendlyARM's Tiny6410 evaluation board.
+
+endchoice
+
+endif
diff --git a/arch/arm/boards/friendlyarm-tiny6410/Makefile b/arch/arm/boards/friendlyarm-tiny6410/Makefile
new file mode 100644
index 0000000..b3ab12e
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/Makefile
@@ -0,0 +1,3 @@
+obj-y += tiny6410.o
+
+obj-$(CONFIG_MACH_TINY6410_FA) += development-board.o
diff --git a/arch/arm/boards/friendlyarm-tiny6410/config.h b/arch/arm/boards/friendlyarm-tiny6410/config.h
new file mode 100644
index 0000000..04f6857
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/config.h
@@ -0,0 +1,8 @@
+/* FriendlyARM Tiny6410 specific global settings */
+
+#ifndef _TINY6410_CONFIG_H_
+# define _TINY6410_CONFIG_H_
+
+#define S3C64XX_CLOCK_REFERENCE 12000000
+
+#endif /* _TINY6410_CONFIG_H_ */
diff --git a/arch/arm/boards/friendlyarm-tiny6410/development-board.c b/arch/arm/boards/friendlyarm-tiny6410/development-board.c
new file mode 100644
index 0000000..5595900
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/development-board.c
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * The FriendlyARM's Tiny6410 evaluation board comes with all connectors and
+ * devices to make the Tiny6410 CPU card work. This includes:
+ *
+ * - the DM9000 network controller
+ * - USB/MCI connectors
+ * - display connector
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <gpio.h>
+#include <dm9000.h>
+#include <mach/devices-s3c64xx.h>
+#include <mach/s3c-generic.h>
+
+#include "tiny6410.h"
+
+/*
+ * dm9000 network controller onboard
+ * Connected to CS line 1 and interrupt line EINT7,
+ * data width is 16 bit
+ * Area 1: Offset 0x300...0x301
+ * Area 2: Offset 0x304...0x305
+ */
+static struct dm9000_platform_data dm9000_data = {
+ .srom = 0, /* no serial ROM for the ethernet address */
+};
+
+static const struct s3c6410_chipselect dm900_cs = {
+ .adr_setup_t = 0,
+ .access_setup_t = 0,
+ .access_t = 20,
+ .cs_hold_t = 3,
+ .adr_hold_t = 20, /* CS must be de-asserted for at least 20 ns */
+ .width = 16,
+};
+
+static void tiny6410evk_setup_dm9000_cs(void)
+{
+ s3c6410_setup_chipselect(1, &dm900_cs);
+}
+
+static const unsigned tiny6410evk_pin_usage[] = {
+ /* UART1 (V24) */
+ GPA4_RXD1 | ENABLE_PU,
+ GPA5_TXD1,
+ GPA6_NCTS1 | ENABLE_PU,
+ GPA7_NRTS1,
+ /* UART2 (V24) */
+ GPB0_RXD2 | ENABLE_PU,
+ GPB1_TXD2,
+ /* UART3 (spare, 3,3 V TTL level only) */
+ GPB2_RXD3 | ENABLE_PU,
+ GPB3_TXD3,
+};
+
+static int tiny6410evk_devices_init(void)
+{
+ int i;
+
+ /* init CPU card specific devices first */
+ tiny6410_init("FA EVK");
+
+ /* ----------- configure the access to the outer space ---------- */
+ for (i = 0; i < ARRAY_SIZE(tiny6410evk_pin_usage); i++)
+ s3c_gpio_mode(tiny6410evk_pin_usage[i]);
+
+ tiny6410evk_setup_dm9000_cs();
+ add_dm9000_device(0, S3C_CS1_BASE + 0x300, S3C_CS1_BASE + 0x304,
+ IORESOURCE_MEM_16BIT, &dm9000_data);
+ return 0;
+}
+device_initcall(tiny6410evk_devices_init);
+
+static int tiny6410evk_console_init(void)
+{
+ /* note: UART0 has no RTS/CTS connected */
+ s3c_gpio_mode(GPA0_RXD0 | ENABLE_PU);
+ s3c_gpio_mode(GPA1_TXD0);
+
+ s3c64xx_add_uart1();
+
+ return 0;
+}
+console_initcall(tiny6410evk_console_init);
+
diff --git a/arch/arm/boards/friendlyarm-tiny6410/env/config b/arch/arm/boards/friendlyarm-tiny6410/env/config
new file mode 100644
index 0000000..35d0fac
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/env/config
@@ -0,0 +1,56 @@
+#!/bin/sh
+
+machine=tiny6410
+eth0.serverip=a.b.c.d.e
+user=
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d.e
+#eth0.netmask=a.b.c.d.e
+#eth0.gateway=a.b.c.d.e
+eth0.ethaddr=08:90:90:90:90:90
+
+# can be either 'nfs', 'tftp' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root-${machine}.${rootfs_type}
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+kernelimage_type=zimage
+kernelimage=zImage-${machine}
+#kernelimage_type=uimage
+#kernelimage=uImage-$machine
+#kernelimage_type=raw
+#kernelimage=Image-$machine
+#kernelimage_type=raw_lzo
+#kernelimage=Image-$machine.lzo
+
+if [ -n $user ]; then
+ kernelimage="${user}"-"${kernelimage}"
+ nfsroot="${eth0.serverip}:/home/${user}/nfsroot/${machine}"
+ rootfsimage="${user}"-"${rootfsimage}"
+else
+ nfsroot="${eth0.serverip}:/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+#
+# "tiny6410" kernel parameter
+# 0 .. 9 = screen type
+# i = touchscreen with propritary FriendlyARM protocol
+# Note: can be "tiny6410= " if nothing of these components are connected
+#
+bootargs="console=ttySAC0,115200 tiny6410=0"
+
+nand_device="nand"
+nand_parts="256k(barebox),128k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nand=3
diff --git a/arch/arm/boards/friendlyarm-tiny6410/tiny6410.c b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.c
new file mode 100644
index 0000000..db13c06
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.c
@@ -0,0 +1,80 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <gpio.h>
+#include <generated/mach-types.h>
+#include <asm/armlinux.h>
+#include <mach/s3c-iomap.h>
+#include <mach/s3c-generic.h>
+
+static const unsigned tiny6410_pin_usage[] = {
+ /* UART0 */
+ GPA2_GPIO | GPIO_IN | ENABLE_PU, /* CTS not connected */
+ GPA3_GPIO | GPIO_IN | ENABLE_PU, /* RTS not connected */
+
+ /* local bus' D0 ... D15 are always active */
+ /* local bus' A0...A5 are always active */
+
+ /* internal NAND memory */
+ GPO0_NCS2, /* NAND's first chip select line */
+ /* NAND's second chip select line, not used */
+ GPO1_GPIO | GPIO_OUT | GPIO_VAL(1),
+ GPP3_FALE,
+ GPP4_FCLE,
+ GPP5_FWE,
+ GPP6_FRE,
+ GPP7_RNB, /* external pull-up */
+
+ GPF13_GPIO | GPIO_OUT | GPIO_VAL(0), /* OTG power supply, 0 = off */
+
+ /* nowhere connected */
+ GPO2_GPIO | GPIO_IN | ENABLE_PU,
+ GPO3_GPIO | GPIO_IN | ENABLE_PU,
+ GPO4_GPIO | GPIO_IN | ENABLE_PU,
+ GPO5_GPIO | GPIO_IN | ENABLE_PU,
+
+ /* local bus address lines 6...15 are nowhere connected */
+ GPO6_GPIO | GPIO_IN | ENABLE_PU,
+ GPO7_GPIO | GPIO_IN | ENABLE_PU,
+ GPO8_GPIO | GPIO_IN | ENABLE_PU,
+ GPO9_GPIO | GPIO_IN | ENABLE_PU,
+ GPO10_GPIO | GPIO_IN | ENABLE_PU,
+ GPO11_GPIO | GPIO_IN | ENABLE_PU,
+ GPO12_GPIO | GPIO_IN | ENABLE_PU,
+ GPO13_GPIO | GPIO_IN | ENABLE_PU,
+ GPO14_GPIO | GPIO_IN | ENABLE_PU,
+ GPO15_GPIO | GPIO_IN | ENABLE_PU,
+};
+
+static int tiny6410_mem_init(void)
+{
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c6410_get_memory_size());
+
+ return 0;
+}
+mem_initcall(tiny6410_mem_init);
+
+void tiny6410_init(const char *bb_name)
+{
+ int i;
+
+ /* ----------- configure the access to the outer space ---------- */
+ for (i = 0; i < ARRAY_SIZE(tiny6410_pin_usage); i++)
+ s3c_gpio_mode(tiny6410_pin_usage[i]);
+
+ armlinux_set_bootparams((void *)S3C_SDRAM_BASE + 0x100);
+ armlinux_set_architecture(MACH_TYPE_TINY6410);
+}
diff --git a/arch/arm/boards/friendlyarm-tiny6410/tiny6410.h b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.h
new file mode 100644
index 0000000..98db422
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-tiny6410/tiny6410.h
@@ -0,0 +1,14 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* to be called by the base board */
+void tiny6410_init(const char*);
diff --git a/arch/arm/configs/friendlyarm_tiny6410_defconfig b/arch/arm/configs/friendlyarm_tiny6410_defconfig
new file mode 100644
index 0000000..5246196
--- /dev/null
+++ b/arch/arm/configs/friendlyarm_tiny6410_defconfig
@@ -0,0 +1,41 @@
+CONFIG_ARCH_S3C64xx=y
+CONFIG_MACH_TINY6410=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_BROKEN=y
+CONFIG_PROMPT="tiny6410:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/friendlyarm-tiny6410/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_DRIVER_NET_DM9K=y
+# CONFIG_SPI is not set
+CONFIG_ZLIB=y
+CONFIG_BZLIB=y
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 3ee8c38..8965110 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -7,12 +7,14 @@ config ARCH_TEXT_BASE
hex
default 0x31fc0000 if MACH_MINI2440
default 0x57fc0000 if MACH_MINI6410
+ default 0x57fc0000 if MACH_TINY6410
default 0x31fc0000 if MACH_A9M2440
default 0x31fc0000 if MACH_A9M2410
config BOARDINFO
default "Mini 2440" if MACH_MINI2440
default "Mini 6410" if MACH_MINI6410
+ default "Tiny 6410" if MACH_TINY6410
default "Digi A9M2440" if MACH_A9M2440
default "Digi A9M2410" if MACH_A9M2410
@@ -105,8 +107,21 @@ config MACH_MINI6410
Say Y here if you are using FriendlyARM Mini6410 board equipped
with a Samsung S3C6410 Processor
+config MACH_TINY6410
+ bool "Tiny 6410"
+ select CPU_S3C6410
+ help
+ Say Y here if you are using FriendlyARM Tiny6410 CPU card equipped
+ with a Samsung S3C6410 Processor
+
endchoice
+menu "Board specific settings "
+
+source arch/arm/boards/friendlyarm-tiny6410/Kconfig
+
+endmenu
+
endif
if ARCH_S5PCxx
--
1.7.10.4
More information about the barebox
mailing list