[PATCH 2/2] panda: add pbl support

[Jean-Christophe PLAGNIOL-VILLARD]

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
---
Hi,

	patch just compiled not test on the platfrom
	if someone can test it

	apply over the pbl patch serie

Best Regards,
J.
 arch/arm/boards/panda/Makefile |    2 ++
 arch/arm/mach-omap/Makefile    |    2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm/boards/panda/Makefile b/arch/arm/boards/panda/Makefile
index c55e26e..12b4d69 100644
--- a/arch/arm/boards/panda/Makefile
+++ b/arch/arm/boards/panda/Makefile
@@ -1 +1,3 @@
 obj-y += board.o lowlevel.o mux.o
+
+pbl-y += lowlevel.o mux.o
diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
index dd9dd5e..e892c1c 100644
--- a/arch/arm/mach-omap/Makefile
+++ b/arch/arm/mach-omap/Makefile
@@ -30,3 +30,5 @@ obj-$(CONFIG_I2C_TWL6030) += omap4_twl6030_mmc.o
 obj-y += gpio.o
 
 pbl-$(CONFIG_ARCH_OMAP3) += omap3_core.o
+pbl-$(CONFIG_ARCH_OMAP4) += omap4_generic.o omap4_clock.o
+pbl-$(CONFIG_ARCH_OMAP4) += syslib.o
-- 
1.7.10.4