[PATCH 7/8] ARM/Samsung: add the Mini6410 platform as the first user of the S3C6410 SoC
Juergen Beisert
jbe at pengutronix.de
Sat Jul 21 06:04:32 EDT 2012
Signed-off-by: Juergen Beisert <jbe at pengutronix.de>
---
arch/arm/Makefile | 1 +
arch/arm/boards/friendlyarm-mini6410/Makefile | 1 +
arch/arm/boards/friendlyarm-mini6410/config.h | 8 +
arch/arm/boards/friendlyarm-mini6410/env/config | 56 +++++
arch/arm/boards/friendlyarm-mini6410/mini6410.c | 305 +++++++++++++++++++++++
arch/arm/configs/friendlyarm_mini6410_defconfig | 40 +++
arch/arm/mach-samsung/Kconfig | 10 +
7 files changed, 421 insertions(+)
create mode 100644 arch/arm/boards/friendlyarm-mini6410/Makefile
create mode 100644 arch/arm/boards/friendlyarm-mini6410/config.h
create mode 100644 arch/arm/boards/friendlyarm-mini6410/env/config
create mode 100644 arch/arm/boards/friendlyarm-mini6410/mini6410.c
create mode 100644 arch/arm/configs/friendlyarm_mini6410_defconfig
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1225df7..bd03fe6 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -123,6 +123,7 @@ board-$(CONFIG_MACH_FREESCALE_MX53_LOCO) := freescale-mx53-loco
board-$(CONFIG_MACH_FREESCALE_MX53_SMD) := freescale-mx53-smd
board-$(CONFIG_MACH_GUF_CUPID) := guf-cupid
board-$(CONFIG_MACH_MINI2440) := mini2440
+board-$(CONFIG_MACH_MINI6410) := friendlyarm-mini6410
board-$(CONFIG_MACH_QIL_A9260) := qil-a9260
board-$(CONFIG_MACH_TNY_A9260) := tny-a926x
board-$(CONFIG_MACH_TNY_A9263) := tny-a926x
diff --git a/arch/arm/boards/friendlyarm-mini6410/Makefile b/arch/arm/boards/friendlyarm-mini6410/Makefile
new file mode 100644
index 0000000..cd7a427
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/Makefile
@@ -0,0 +1 @@
+obj-y += mini6410.o
diff --git a/arch/arm/boards/friendlyarm-mini6410/config.h b/arch/arm/boards/friendlyarm-mini6410/config.h
new file mode 100644
index 0000000..ee38192
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/config.h
@@ -0,0 +1,8 @@
+/* FriendlyARM Mini6410 specific global settings */
+
+#ifndef _MINI6410_CONFIG_H_
+# define _MINI6410_CONFIG_H_
+
+#define S3C64XX_CLOCK_REFERENCE 12000000
+
+#endif /* _MINI6410_CONFIG_H_ */
diff --git a/arch/arm/boards/friendlyarm-mini6410/env/config b/arch/arm/boards/friendlyarm-mini6410/env/config
new file mode 100644
index 0000000..a1c86e1
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/env/config
@@ -0,0 +1,56 @@
+#!/bin/sh
+
+machine=mini6410
+eth0.serverip=a.b.c.d.e
+user=
+
+# use 'dhcp' to do dhcp in barebox and in kernel
+# use 'none' if you want to skip kernel ip autoconfiguration
+ip=dhcp
+
+# or set your networking parameters here
+#eth0.ipaddr=a.b.c.d.e
+#eth0.netmask=a.b.c.d.e
+#eth0.gateway=a.b.c.d.e
+eth0.ethaddr=08:90:90:90:90:90
+
+# can be either 'nfs', 'tftp' or 'nand'
+kernel_loc=tftp
+# can be either 'net', 'nand' or 'initrd'
+rootfs_loc=net
+
+# can be either 'jffs2' or 'ubifs'
+rootfs_type=ubifs
+rootfsimage=root-${machine}.${rootfs_type}
+
+# The image type of the kernel. Can be uimage, zimage, raw, or raw_lzo
+kernelimage_type=zimage
+kernelimage=zImage-${machine}
+#kernelimage_type=uimage
+#kernelimage=uImage-$machine
+#kernelimage_type=raw
+#kernelimage=Image-$machine
+#kernelimage_type=raw_lzo
+#kernelimage=Image-$machine.lzo
+
+if [ -n $user ]; then
+ kernelimage="${user}"-"${kernelimage}"
+ nfsroot="${eth0.serverip}:/home/${user}/nfsroot/${machine}"
+ rootfsimage="${user}"-"${rootfsimage}"
+else
+ nfsroot="${eth0.serverip}:/path/to/nfs/root"
+fi
+
+autoboot_timeout=3
+
+#
+# "mini6410" kernel parameter
+# 0 .. 9 = screen type
+# i = touchscreen with propritary FriendlyARM protocol
+# Note: can be "minit6410= " if nothing of these components are connected
+#
+bootargs="console=ttySAC0,115200 mini6410=0"
+
+nand_device="nand"
+nand_parts="256k(barebox),128k(bareboxenv),1536k(kernel),-(root)"
+rootfs_mtdblock_nand=3
diff --git a/arch/arm/boards/friendlyarm-mini6410/mini6410.c b/arch/arm/boards/friendlyarm-mini6410/mini6410.c
new file mode 100644
index 0000000..01437ac
--- /dev/null
+++ b/arch/arm/boards/friendlyarm-mini6410/mini6410.c
@@ -0,0 +1,305 @@
+/*
+ * Copyright (C) 2012 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <dm9000.h>
+#include <gpio.h>
+#include <generated/mach-types.h>
+#include <asm/armlinux.h>
+#include <mach/s3c-iomap.h>
+#include <mach/devices-s3c64xx.h>
+#include <mach/s3c-generic.h>
+
+/*
+ * dm9000 network controller onboard
+ * Connected to CS line 1 and interrupt line EINT7,
+ * data width is 16 bit
+ * Area 1: Offset 0x300...0x301
+ * Area 2: Offset 0x304...0x305
+ */
+static struct dm9000_platform_data dm9000_data = {
+ .srom = 0, /* no serial ROM for the ethernet address */
+};
+
+static const unsigned pin_usage[] = {
+ /* UART2 (spare, 3,3 V TTL level only) */
+ GPA4_RXD1 | ENABLE_PU,
+ GPA5_TXD1,
+ GPA6_NCTS1 | ENABLE_PU,
+ GPA7_NRTS1,
+ /* UART3 (spare, 3,3 V TTL level only) */
+ GPB0_RXD2 | ENABLE_PU,
+ GPB1_TXD2,
+ /* UART4 (spare, 3,3 V TTL level only) */
+ GPB2_RXD3 | ENABLE_PU,
+ GPB3_TXD3,
+
+ GPB4_GPIO | GPIO_IN | ENABLE_PU,
+
+ /* I2C bus */
+ GPB5_IIC0_SCL, /* external PU */
+ GPB6_IIC0_SDA, /* external PU */
+
+ GPC0_SPI0_MISO | ENABLE_PU,
+ GPC1_SPI0_CLK,
+ GPC2_SPI0_MOSI,
+ GPC3_SPI0_NCS,
+
+ GPC4_SPI1_MISO | ENABLE_PU,
+ GPC5_SPI1_CLK,
+ GPC6_SPI1_MOSI,
+ GPC7_SPI1_NCS,
+
+ GPD0_AC97_BITCLK,
+ GPD1_AC97_NRST,
+ GPD2_AC97_SYNC,
+ GPD3_AC97_SDI | ENABLE_PU,
+ GPD4_AC97_SDO,
+
+ GPE0_GPIO | GPIO_OUT | GPIO_VAL(0), /* LCD backlight off */
+ GPE1_GPIO | GPIO_IN | ENABLE_PU,
+ GPE2_GPIO | GPIO_IN | ENABLE_PU,
+ GPE3_GPIO | GPIO_IN | ENABLE_PU,
+ GPE4_GPIO | GPIO_IN | ENABLE_PU,
+
+ /* keep all camera signals at reasonable values */
+ GPF0_GPIO | GPIO_IN | ENABLE_PU,
+ GPF1_GPIO | GPIO_IN | ENABLE_PU,
+ GPF2_GPIO | GPIO_IN | ENABLE_PU,
+ GPF3_GPIO | GPIO_IN | ENABLE_PU,
+ GPF4_GPIO | GPIO_IN | ENABLE_PU,
+ GPF5_GPIO | GPIO_IN | ENABLE_PU,
+ GPF6_GPIO | GPIO_IN | ENABLE_PU,
+ GPF7_GPIO | GPIO_IN | ENABLE_PU,
+ GPF8_GPIO | GPIO_IN | ENABLE_PU,
+ GPF9_GPIO | GPIO_IN | ENABLE_PU,
+ GPF10_GPIO | GPIO_IN | ENABLE_PU,
+ GPF11_GPIO | GPIO_IN | ENABLE_PU,
+ GPF12_GPIO | GPIO_IN | ENABLE_PU,
+ GPF13_GPIO | GPIO_OUT | GPIO_VAL(0), /* USB power off */
+#if 0
+ GPF14_CLKOUT, /* for testing purposes, but very noisy */
+#else
+ GPF14_GPIO | GPIO_OUT | GPIO_VAL(0), /* Buzzer off */
+#endif
+ GPF15_GPIO | GPIO_OUT | GPIO_VAL(0), /* Backlight PWM inactive */
+
+ /* SD card slot (all signals have external 10k PU) */
+ GPG0_MMC0_CLK,
+ GPG1_MMC0_CMD,
+ GPG2_MMC0_DAT0,
+ GPG3_MMC0_DAT1,
+ GPG4_MMC0_DAT2,
+ GPG5_MMC0_DAT3,
+ GPG6_MMC0_NCD,
+
+ /* SDIO slot (all used signals have external PU) */
+ GPH0_GPIO | GPIO_IN, /* CLK */
+ GPH1_GPIO | GPIO_IN, /* CMD */
+ GPH2_GPIO | GPIO_IN, /* DAT0 */
+ GPH3_GPIO | GPIO_IN, /* DAT1 */
+ GPH4_GPIO | GPIO_IN, /* DAT2 */
+ GPH5_GPIO | GPIO_IN, /* DAT3 */
+ GPH6_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+ GPH7_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+ GPH8_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+ GPH9_GPIO | GPIO_IN | ENABLE_PU, /* nowhere connected */
+
+ /* as long as we are not using the LCD controller, disable the pins */
+ GPI0_GPIO | GPIO_IN | ENABLE_PD,
+ GPI1_GPIO | GPIO_IN | ENABLE_PD,
+ GPI2_GPIO | GPIO_IN | ENABLE_PD,
+ GPI3_GPIO | GPIO_IN | ENABLE_PD,
+ GPI4_GPIO | GPIO_IN | ENABLE_PD,
+ GPI5_GPIO | GPIO_IN | ENABLE_PD,
+ GPI6_GPIO | GPIO_IN | ENABLE_PD,
+ GPI7_GPIO | GPIO_IN | ENABLE_PD,
+ GPI8_GPIO | GPIO_IN | ENABLE_PD,
+ GPI9_GPIO | GPIO_IN | ENABLE_PD,
+ GPI10_GPIO | GPIO_IN | ENABLE_PD,
+ GPI11_GPIO | GPIO_IN | ENABLE_PD,
+ GPI12_GPIO | GPIO_IN | ENABLE_PD,
+ GPI13_GPIO | GPIO_IN | ENABLE_PD,
+ GPI14_GPIO | GPIO_IN | ENABLE_PD,
+ GPI15_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ0_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ1_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ2_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ3_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ4_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ5_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ6_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ7_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ8_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ9_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ10_GPIO | GPIO_IN | ENABLE_PD,
+ GPJ11_GPIO | GPIO_IN | ENABLE_PD,
+
+ GPK0_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPK1_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPK2_GPIO | GPIO_IN,
+ GPK3_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPK4_GPIO | GPIO_OUT | GPIO_VAL(1), /* LED #1 (high = LED off) */
+ GPK5_GPIO | GPIO_OUT | GPIO_VAL(1), /* LED #2 (high = LED off) */
+ GPK6_GPIO | GPIO_OUT | GPIO_VAL(1), /* LED #3 (high = LED off) */
+ GPK7_GPIO | GPIO_OUT | GPIO_VAL(1), /* LED #4 (high = LED off) */
+ GPK8_GPIO | GPIO_IN, /* (external PU) */
+ GPK9_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPK10_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPK11_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPK12_GPIO | GPIO_IN, /* OCT_DET */
+ GPK13_GPIO | GPIO_IN, /* WIFI power (external PU) */
+ GPK14_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPK15_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+
+ GPL0_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL1_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL2_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL3_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL4_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL5_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL6_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL7_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPL8_GPIO | GPIO_IN, /* EINT16 (external PU) */
+ GPL9_GPIO | GPIO_IN | ENABLE_PU, /* EINT17 */
+ GPL10_GPIO | GPIO_IN | ENABLE_PU, /* EINT18 */
+ GPL11_GPIO | GPIO_IN, /* EINT19 + K7 (external PU) */
+ GPL12_GPIO | GPIO_IN, /* EINT20 + K6 (external PU) */
+ GPL13_GPIO | GPIO_IN, /* SD0 WP (external PU) */
+ GPL14_GPIO | GPIO_IN, /* SD1 WP (external PU) */
+
+ GPM0_GPIO | GPIO_IN, /* (external PU) */
+ GPM1_GPIO | GPIO_IN, /* (external PU) */
+ GPM2_GPIO | GPIO_IN, /* (external PU) */
+ GPM3_GPIO | GPIO_IN, /* (external PU) */
+ GPM4_GPIO | GPIO_IN, /* (external PU) */
+ GPM5_GPIO | GPIO_IN, /* (external PU) */
+
+ GPN0_GPIO | GPIO_IN, /* EINT0 (external PU) */
+ GPN1_GPIO | GPIO_IN, /* EINT1 (external PU) */
+ GPN2_GPIO | GPIO_IN, /* EINT2 (external PU) */
+ GPN3_GPIO | GPIO_IN, /* EINT3 (external PU) */
+ GPN4_GPIO | GPIO_IN, /* EINT4 (external PU) */
+ GPN5_GPIO | GPIO_IN, /* EINT5 (external PU) */
+ GPN6_GPIO | GPIO_IN, /* EINT6 (external PU) */
+ GPN7_GPIO | GPIO_IN | ENABLE_PU, /* EINT7 DM9000 interrupt */
+ GPN8_GPIO | GPIO_IN, /* EINT8 USB detect (external PU) */
+ GPN9_GPIO | GPIO_IN, /* EINT9 (external PU) */
+ GPN10_GPIO | GPIO_IN, /* SD1 CD (external PU) */
+ GPN11_GPIO | GPIO_IN, /* EINT11 (external PU) */
+ GPN12_GPIO | GPIO_IN, /* EINT12 IR in (external PU) */
+ GPN13_GPIO | GPIO_IN, /* BOOT0/EINT13 (externally fixed) */
+ GPN14_GPIO | GPIO_IN, /* BOOT1/EINT14 (externally fixed) */
+ GPN15_GPIO | GPIO_IN, /* BOOT2/EINT15 (externally fixed) */
+
+ GPO0_NCS2, /* NAND */
+ GPO1_NCS3, /* NAND */
+ GPO2_NCS4, /* CON5 */
+ GPO3_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO4_GPIO | GPIO_IN | ENABLE_PU, /* CON5 pin 8 */
+ GPO5_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO6_ADDR6, /* CON5 */
+ GPO7_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO8_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO9_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO10_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO11_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO12_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO13_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO14_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPO15_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+
+ GPP0_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPP1_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPP2_NWAIT | ENABLE_PU, /* CON5 */
+ GPP3_FALE, /* NAND */
+ GPP4_FCLE, /* NAND */
+ GPP5_FWE, /* NAND */
+ GPP6_FRE, /* NAND */
+ GPP7_RNB, /* NAND (external PU) */
+ GPP8_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPP9_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPP10_GPIO | GPIO_IN, /* (external PU) */
+ GPP11_GPIO | GPIO_IN, /* (external PU) */
+ GPP12_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPP13_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+ GPP14_GPIO | GPIO_IN | ENABLE_PU, /* not used */
+
+ GPQ0_GPIO | GPIO_IN | ENABLE_PU, /* not used as LADDR18 */
+ GPQ1_GPIO | GPIO_IN, /* (external PU) */
+ GPQ2_GPIO | GPIO_IN, /* (external PU) */
+ GPQ3_GPIO | GPIO_IN, /* (external PU) */
+ GPQ4_GPIO | GPIO_IN, /* (external PU) */
+ GPQ5_GPIO | GPIO_IN, /* (external PU) */
+ GPQ6_GPIO | GPIO_IN, /* (external PU) */
+ GPQ7_GPIO | GPIO_IN | ENABLE_PU, /* not used as LADDR17 */
+ GPQ8_GPIO | GPIO_IN | ENABLE_PU, /* not used as LADDR16 */
+};
+
+static int mini6410_mem_init(void)
+{
+ arm_add_mem_device("ram0", S3C_SDRAM_BASE, s3c6410_get_memory_size());
+
+ return 0;
+}
+mem_initcall(mini6410_mem_init);
+
+static const struct s3c6410_chipselect dm900_cs = {
+ .adr_setup_t = 0,
+ .access_setup_t = 0,
+ .access_t = 20,
+ .cs_hold_t = 3,
+ .adr_hold_t = 20, /* CS must be de-asserted for at least 20 ns */
+ .width = 16,
+};
+
+static void mini6410_setup_dm9000_cs(void)
+{
+ s3c6410_setup_chipselect(1, &dm900_cs);
+}
+
+static int mini6410_devices_init(void)
+{
+ int i;
+
+ /* ----------- configure the access to the outer space ---------- */
+ for (i = 0; i < ARRAY_SIZE(pin_usage); i++)
+ s3c_gpio_mode(pin_usage[i]);
+
+ mini6410_setup_dm9000_cs();
+ add_dm9000_device(0, S3C_CS1_BASE + 0x300, S3C_CS1_BASE + 0x304,
+ IORESOURCE_MEM_16BIT, &dm9000_data);
+
+ armlinux_set_bootparams((void *)S3C_SDRAM_BASE + 0x100);
+ armlinux_set_architecture(MACH_TYPE_MINI6410);
+
+ return 0;
+}
+
+device_initcall(mini6410_devices_init);
+
+static int mini6410_console_init(void)
+{
+ s3c_gpio_mode(GPA0_RXD0 | ENABLE_PU);
+ s3c_gpio_mode(GPA1_TXD0);
+ s3c_gpio_mode(GPA2_NCTS0 | ENABLE_PU);
+ s3c_gpio_mode(GPA3_NRTS0);
+
+ s3c64xx_add_uart1();
+
+ return 0;
+}
+
+console_initcall(mini6410_console_init);
diff --git a/arch/arm/configs/friendlyarm_mini6410_defconfig b/arch/arm/configs/friendlyarm_mini6410_defconfig
new file mode 100644
index 0000000..b80f8fb
--- /dev/null
+++ b/arch/arm/configs/friendlyarm_mini6410_defconfig
@@ -0,0 +1,40 @@
+CONFIG_ARCH_S3C64xx=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_BROKEN=y
+CONFIG_PROMPT="mini6410:"
+CONFIG_LONGHELP=y
+CONFIG_GLOB=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/friendlyarm-mini6410/env"
+CONFIG_DEBUG_INFO=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_MTEST=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_NET=y
+CONFIG_NET_DHCP=y
+CONFIG_NET_PING=y
+CONFIG_NET_TFTP=y
+CONFIG_DRIVER_NET_DM9K=y
+# CONFIG_SPI is not set
+CONFIG_ZLIB=y
+CONFIG_BZLIB=y
+CONFIG_LZO_DECOMPRESS=y
diff --git a/arch/arm/mach-samsung/Kconfig b/arch/arm/mach-samsung/Kconfig
index 8f63963..e621259 100644
--- a/arch/arm/mach-samsung/Kconfig
+++ b/arch/arm/mach-samsung/Kconfig
@@ -6,11 +6,13 @@ if ARCH_SAMSUNG
config ARCH_TEXT_BASE
hex
default 0x31fc0000 if MACH_MINI2440
+ default 0x57fc0000 if MACH_MINI6410
default 0x31fc0000 if MACH_A9M2440
default 0x31fc0000 if MACH_A9M2410
config BOARDINFO
default "Mini 2440" if MACH_MINI2440
+ default "Mini 6410" if MACH_MINI6410
default "Digi A9M2440" if MACH_A9M2440
default "Digi A9M2410" if MACH_A9M2410
@@ -99,6 +101,14 @@ choice
prompt "S3C64xx Board Type"
+config MACH_MINI6410
+ bool "Mini 6410"
+ select CPU_S3C6410
+ select HAS_DM9000
+ help
+ Say Y here if you are using FriendlyARM Mini6410 board equipped
+ with a Samsung S3C6410 Processor
+
endchoice
menu "Board specific settings "
--
1.7.10.4
More information about the barebox
mailing list