Booting kernel from FAT partition on beagle board

[Sascha Hauer]

On Sun, Jul 22, 2012 at 05:29:44PM +0200, Bernhard Walle wrote:
> Hi,
> 
> Passing control to ARM Linux uImage handler
> 
> Starting kernel at 0x80008000...
> commandline: console=ttyO2,115200 vram=12M
> omapfb.mode=dvi:1024x768MR-16 at 60 omapfb.debug=y omapdss.def_disp=dvi
> root=/dev/mmcblk0p2 ro rootfstype=ext3 rootwait earlyprintk=ttyO2,115200

earlyprintk does not take options.

Have you enabled earlyprintk support in your config? At least you
should something then.

> arch_number: 1546
> ------------------------------------------------------------
> 
> The same kernel boots fine using u-boot. I'm using Barebox 2012.07.0 and
> u-boot 2012.07-rc1.
> 
> Did I do something wrong? Or is that just a bug?

What you tried should work, I can't see something obviously wrong.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |