[PATCH 9/9] Add compressed image support
Sascha Hauer
s.hauer at pengutronix.de
Thu Jul 19 13:41:25 EDT 2012
On Thu, Jul 19, 2012 at 07:08:45PM +0200, Johannes Stezenbach wrote:
> Hi,
>
> On Thu, Jul 19, 2012 at 10:13:02AM +0200, Sascha Hauer wrote:
> > --- a/Makefile
> > +++ b/Makefile
> ...
> > +ifdef CONFIG_IMAGE_COMPRESSION_LZO
> > +barebox: piggy.lzo.o
> > + @echo " LD " $@
> > + $(Q)$(LD) $(LDFLAGS) $(LDFLAGS_barebox) -o $@ \
> > + -T $(barebox-compressed-lds) $(barebox-compressed) \
> > + --start-group $(barebox-common) piggy.lzo.o --end-group
> > +else
>
> Where is barebox-compressed set?
>
> I tried it and it fails to link:
>
> LD arch/arm/lib/built-in.o
> LD barebox-uncompressed
> SYSMAP System.map
> OBJCOPY barebox-uncompressed.bin
> LZO barebox-uncompressed.bin.lzo
> CC piggy.lzo.o
> LD barebox
> common/built-in.o: In function `start_barebox':
> .../barebox/common/startup.c:154: undefined reference to `__barebox_initcalls_start'
> .../barebox/common/startup.c:154: undefined reference to `__barebox_initcalls_end'
>
> $ make V=1
> ...
> LD barebox
> arm-linux-ld -EL -Map barebox.map -static --gc-sections -o barebox \
> -T arch/arm/lib/barebox-compressed.lds \
> --start-group common/built-in.o drivers/built-in.o commands/built-in.o lib/built-in.o crypto/built-in.o net/built-in.o fs/built-in.o arch/arm/boards/foo/built-in.o arch/arm/mach-foo/built-in.o arch/arm/lib/built-in.o arch/arm/cpu/built-in.o piggy.lzo.o --end-group
>
>
> It shouldn't link all the -built-in.o into the uncompressor, should it?
> Or is it supposed to work via --gc-sections trick?
Yes, it works using --gc-sections. Are you building a defconfig or a
custom one? If the error above is correct start_barebox is referenced
from the decompressor code. This should not happen.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
More information about the barebox
mailing list