May 2023 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Mon May 1 00:06:23 PDT 2023
Ending: Wed May 31 11:29:49 PDT 2023
Messages: 679

• [PATCH] dt-bindings: phy: brcm,kona-usb2-phy: convert to YAML   Krzysztof Kozlowski
  • [PATCH] dt-bindings: phy: brcm,kona-usb2-phy: convert to YAML   Vinod Koul
• [PATCH v3 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit   Martin Blumenstingl
  • [PATCH v3 1/5] phy: amlogic: enable/disable clkin during Amlogic USB PHY init/exit   Vinod Koul
• [PATCH v3 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   Martin Blumenstingl
  • [PATCH v3 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   neil.armstrong at linaro.org
    • [PATCH v3 5/5] arm64: dts: meson: a1: support USB controller in OTG mode   Dmitry Rokosov
• [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
  • [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Sean Anderson
    • [PATCH v14 00/15] phy: Add support for Lynx 10G SerDes   Vladimir Oltean
• [PATCH v9 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
  • [PATCH v9 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
  • [PATCH v9 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding   Bhupesh Sharma
    • [PATCH v9 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding   Dmitry Baryshkov
      • [PATCH v9 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding   Bhupesh Sharma
  • [PATCH v9 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
    • [PATCH v9 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Dmitry Baryshkov
    • [PATCH v9 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Dmitry Baryshkov
    • [PATCH v9 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
  • [PATCH v9 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node   Bhupesh Sharma
    • [PATCH v9 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node   Dmitry Baryshkov
• [PATCH v3 00/13] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
  • [PATCH v3 01/13] dt-bindings: soc: samsung: add Exynos4212 PMU compatible   Artur Weber
    • (subset) [PATCH v3 01/13] dt-bindings: soc: samsung: add Exynos4212 PMU compatible   Krzysztof Kozlowski
  • [PATCH v3 02/13] dt-bindings: clock: add Exynos4212 clock compatible   Artur Weber
    • (subset) [PATCH v3 02/13] dt-bindings: clock: add Exynos4212 clock compatible   Krzysztof Kozlowski
  • [PATCH v3 03/13] ARM: exynos: Re-introduce Exynos4212 support   Artur Weber
    • (subset) [PATCH v3 03/13] ARM: exynos: Re-introduce Exynos4212 support   Krzysztof Kozlowski
  • [PATCH v3 04/13] soc: samsung: Re-introduce Exynos4212 support   Artur Weber
    • (subset) [PATCH v3 04/13] soc: samsung: Re-introduce Exynos4212 support   Krzysztof Kozlowski
  • [PATCH v3 05/13] clk: samsung: Add Exynos4212 compatible to CLKOUT driver   Artur Weber
    • (subset) [PATCH v3 05/13] clk: samsung: Add Exynos4212 compatible to CLKOUT driver   Krzysztof Kozlowski
  • [PATCH v3 06/13] clk: samsung: Re-add support for Exynos4212 CPU clock   Artur Weber
    • (subset) [PATCH v3 06/13] clk: samsung: Re-add support for Exynos4212 CPU clock   Krzysztof Kozlowski
  • [PATCH v3 07/13] Revert "media: exynos4-is: Remove dependency on obsolete SoC support"   Artur Weber
    • [PATCH v3 07/13] Revert "media: exynos4-is: Remove dependency on obsolete SoC support"   Krzysztof Kozlowski
  • [PATCH v3 08/13] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"   Artur Weber
    • [PATCH v3 08/13] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"   Krzysztof Kozlowski
      • [PATCH v3 08/13] Revert "phy: Remove SOC_EXYNOS4212 dep. from PHY_EXYNOS4X12_USB"   Vinod Koul
  • [PATCH v3 09/13] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi   Artur Weber
    • (subset) [PATCH v3 09/13] ARM: dts: Move common Exynos4x12 definitions to exynos4x12.dtsi   Krzysztof Kozlowski
  • [PATCH v3 10/13] ARM: dts: Re-introduce Exynos4212 DTSI   Artur Weber
    • (subset) [PATCH v3 10/13] ARM: dts: Re-introduce Exynos4212 DTSI   Krzysztof Kozlowski
  • [PATCH v3 11/13] ARM: dts: exynos: Fix some typos in comments   Artur Weber
    • [PATCH v3 11/13] ARM: dts: exynos: Fix some typos in comments   Krzysztof Kozlowski
  • [PATCH v3 12/13] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards   Artur Weber
    • (subset) [PATCH v3 12/13] dt-bindings: arm: samsung: Add Samsung Galaxy Tab3 family boards   Krzysztof Kozlowski
  • [PATCH v3 13/13] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Artur Weber
    • [PATCH v3 13/13] ARM: dts: exynos: Add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
  • [PATCH v3 00/13] Re-introduce Exynos4212 support and add Samsung Galaxy Tab 3 8.0 boards   Krzysztof Kozlowski
• [PATCH v10 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
  • [PATCH v10 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
    • [PATCH v10 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Krzysztof Kozlowski
      • [PATCH v10 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
      • [PATCH v10 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
  • [PATCH v10 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding   Bhupesh Sharma
    • [PATCH v10 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding   Dmitry Baryshkov
  • [PATCH v10 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
    • [PATCH v10 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Konrad Dybcio
    • [PATCH v10 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Caleb Connolly
  • [PATCH v10 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node   Bhupesh Sharma
    • [PATCH v10 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node   Konrad Dybcio
    • [PATCH v10 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node   Caleb Connolly
  • [PATCH v10 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Vinod Koul
    • [PATCH v10 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
• (subset) [PATCHv2 0/7] phy-rockchip-inno-usb2: add RK3588 support   Heiko Stuebner
• [PATCH 0/2] phy: qcom-qmp: fix init-count imbalance   Johan Hovold
  • [PATCH 1/2] phy: qcom-qmp-combo: fix init-count imbalance   Johan Hovold
    • [PATCH 1/2] phy: qcom-qmp-combo: fix init-count imbalance   Dmitry Baryshkov
  • [PATCH 2/2] phy: qcom-qmp-pcie-msm8996: fix init-count imbalance   Johan Hovold
    • [PATCH 2/2] phy: qcom-qmp-pcie-msm8996: fix init-count imbalance   Dmitry Baryshkov
  • [PATCH 0/2] phy: qcom-qmp: fix init-count imbalance   Vinod Koul
• [PATCH 2/7] phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit   Johan Hovold
• [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Konrad Dybcio
  • [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Johan Hovold
    • [PATCH 6/7] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Bjorn Andersson
• [PATCH 3/7] phy: qcom-qmp-combo: Introduce orientation variable   Johan Hovold
  • [PATCH 3/7] phy: qcom-qmp-combo: Introduce orientation variable   Bjorn Andersson
    • [PATCH 3/7] phy: qcom-qmp-combo: Introduce orientation variable   Johan Hovold
      • [PATCH 3/7] phy: qcom-qmp-combo: Introduce orientation variable   Bjorn Andersson
      • [PATCH 3/7] phy: qcom-qmp-combo: Introduce orientation variable   Johan Hovold
• [PATCH 4/7] phy: qcom-qmp-combo: Introduce orientation switching   Johan Hovold
• [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Johan Hovold
  • [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Bjorn Andersson
    • [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Johan Hovold
      • [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Dmitry Baryshkov
      • [PATCH 5/7] phy: qcom-qmp-combo: Introduce drm_bridge   Bjorn Andersson
• [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching   Johan Hovold
  • [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching   Neil Armstrong
  • [PATCH 0/7] phy: qcom-qmp-combo: Support orientation switching   Bjorn Andersson
• [PATCH v2] phy: mediatek: rework the floating point comparisons to fixed point   Tom Rix
  • [PATCH v2] phy: mediatek: rework the floating point comparisons to fixed point   Chunfeng Yun (云春峰)
  • [PATCH v2] phy: mediatek: rework the floating point comparisons to fixed point   Matthias Brugger
  • [PATCH v2] phy: mediatek: rework the floating point comparisons to fixed point   Vinod Koul
• [PATCH v1 0/6] arm64: qcom: sa8775p: add support for USB   Adrien Thierry
• [GIT PULL]: Generic phy updates for v6.4   Vinod Koul
  • [GIT PULL]: Generic phy updates for v6.4   pr-tracker-bot at kernel.org
  • [GIT PULL]: Generic phy updates for v6.4   Nathan Chancellor
    • [GIT PULL]: Generic phy updates for v6.4   Vinod Koul
      • [GIT PULL]: Generic phy updates for v6.4   Linus Torvalds
      • [GIT PULL]: Generic phy updates for v6.4   Vinod Koul
• [PATCH 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Bryan O'Donoghue
  • [PATCH 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Neil Armstrong
    • [PATCH 1/7] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Bjorn Andersson
• [PATCH v4 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
• [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
  • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Krzysztof Kozlowski
    • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Krzysztof Kozlowski
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Krzysztof Kozlowski
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Krzysztof Kozlowski
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Krzysztof Kozlowski
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Conor Dooley
      • [RESEND v2 1/6] dt-bindings: power: Add JH7110 AON PMU support   Changhuang Liang
• [PATCH] phy: tegra: xusb: Fix use-after-free issue   Haotien Hsu
  • [PATCH] phy: tegra: xusb: Fix use-after-free issue   Thierry Reding
    • [PATCH] phy: tegra: xusb: Fix use-after-free issue   Vinod Koul
• [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
  • [PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Krzysztof Kozlowski
• [PATCH v3 14/65] clk: lochnagar: Add a determine_rate hook   Charles Keepax
• [PATCH v3 43/65] ASoC: tlv320aic32x4: Add a determine_rate hook   Maxime Ripard
• [PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook   Maxime Ripard
  • [PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook   Dinh Nguyen
    • [PATCH v3 29/65] clk: socfpga: gate: Add a determine_rate hook   Maxime Ripard
• [PATCH] phy: mediatek: Remove unusued ret and check   Palmer Dabbelt
  • [PATCH] phy: mediatek: Remove unusued ret and check   Vinod Koul
• [PATCH v10 0/9] Enable IPQ9754 USB   Varadarajan Narayanan
  • [PATCH v10 1/9] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible   Varadarajan Narayanan
  • [PATCH v10 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
    • [PATCH v10 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Krzysztof Kozlowski
  • [PATCH v10 3/9] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Varadarajan Narayanan
  • [PATCH v10 4/9] clk: qcom: gcc-ipq9574: Add USB related clocks   Varadarajan Narayanan
  • [PATCH v10 5/9] phy: qcom-qusb2: add QUSB2 support for IPQ9574   Varadarajan Narayanan
  • [PATCH v10 6/9] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence   Varadarajan Narayanan
    • [PATCH v10 6/9] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence   Dmitry Baryshkov
  • [PATCH v10 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
    • [PATCH v10 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes   Dmitry Baryshkov
      • [PATCH v10 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
  • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Varadarajan Narayanan
    • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Dmitry Baryshkov
      • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Konrad Dybcio
      • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Dmitry Baryshkov
      • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Varadarajan Narayanan
      • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Dmitry Baryshkov
      • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Varadarajan Narayanan
      • [PATCH v10 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Dmitry Baryshkov
  • [PATCH v10 9/9] arm64: dts: qcom: ipq9574: Enable USB   Varadarajan Narayanan
    • [PATCH v10 9/9] arm64: dts: qcom: ipq9574: Enable USB   Dmitry Baryshkov
• [PATCH 0/2] Fix mtk-hdmi-mt8195 unitialized variable usage and clock rate calculation   Vinod Koul
• [PATCH] phy: mediatek: fix returning garbage   Vinod Koul
  • [PATCH] phy: mediatek: fix returning garbage   Matthias Brugger
    • [PATCH] phy: mediatek: fix returning garbage   Vinod Koul
      • [PATCH] phy: mediatek: fix returning garbage   Matthias Brugger
      • [PATCH] phy: mediatek: fix returning garbage   Vinod Koul
• [PATCH v4 00/68] clk: Make determine_rate mandatory for muxes   Maxime Ripard
  • [PATCH v4 03/68] clk: Move no reparent case into a separate function   Maxime Ripard
  • [PATCH v4 04/68] clk: Introduce clk_hw_determine_rate_no_reparent()   Maxime Ripard
    • [PATCH v4 04/68] clk: Introduce clk_hw_determine_rate_no_reparent()   kernel test robot
  • [PATCH v4 41/68] phy: cadence: sierra: Add a determine_rate hook   Maxime Ripard
  • [PATCH v4 42/68] phy: cadence: torrent: Add a determine_rate hook   Maxime Ripard
  • [PATCH v4 43/68] phy: ti: am654-serdes: Add a determine_rate hook   Maxime Ripard
  • [PATCH v4 44/68] phy: ti: j721e-wiz: Add a determine_rate hook   Maxime Ripard
  • [PATCH v4 68/68] clk: Forbid to register a mux without determine_rate   Maxime Ripard
• [GIT PULL]: Generic phy fixes for v6.4-rc1   Vinod Koul
  • [GIT PULL]: Generic phy fixes for v6.4-rc1   pr-tracker-bot at kernel.org
• [PATCH 1/2] phy: cadence: salvo: Add usb2-disconnect-threshold-microvolt property   Frank Li
  • [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add property usb2-disconnect-threshold-microvolt   Frank Li
    • [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add property usb2-disconnect-threshold-microvolt   Rob Herring
    • [PATCH 2/2] doc: dt-binding: cdns-salvo-phy: add property usb2-disconnect-threshold-microvolt   Krzysztof Kozlowski
  • [PATCH 1/2] phy: cadence: salvo: Add usb2-disconnect-threshold-microvolt property   Krzysztof Kozlowski
  • [PATCH 1/2] phy: cadence: salvo: Add usb2-disconnect-threshold-microvolt property   Vinod Koul
• [PATCH] phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc   Krzysztof Kozlowski
  • [PATCH] phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc   Konrad Dybcio
  • [PATCH] phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc   Vinod Koul
• [PATCH] phy: hisilicon: Adopt phy-hisi-inno-usb2 to Hi3798MV100   David Yang
  • [PATCH] phy: hisilicon: Adopt phy-hisi-inno-usb2 to Hi3798MV100   kernel test robot
  • [PATCH] phy: hisilicon: Adopt phy-hisi-inno-usb2 to Hi3798MV100   Vinod Koul
    • [PATCH] phy: hisilicon: Adopt phy-hisi-inno-usb2 to Hi3798MV100   Yangfl
      • [PATCH] phy: hisilicon: Adopt phy-hisi-inno-usb2 to Hi3798MV100   Vinod Koul
• [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Vinod Koul
  • [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Sean Anderson
    • [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Vinod Koul
      • [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Sean Anderson
      • [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Vinod Koul
      • [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Sean Anderson
      • [PATCH v14 06/15] clk: Add Lynx 10G SerDes PLL driver   Vinod Koul
• [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver   Vinod Koul
  • [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
    • [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver   Vinod Koul
      • [PATCH v14 07/15] phy: fsl: Add Lynx 10G SerDes driver   Sean Anderson
• [PATCH v2 0/6] arm64: qcom: sa8775p: add support for USB   Vinod Koul
• [PATCH v2] phy: tegra: xusb: Fix use-after-free issue   Haotien Hsu
• [PATCH] dt-bindings: phy: qcom,edp-phy: allow power-domains   Vinod Koul
• [PATCH v2] dt-bindings: phy: qmp-ufs: tweak clock and clock-names for sa8775p   Vinod Koul
• [PATCH] phy: cadence: Sierra: Add support for SGMII   Vinod Koul
• [PATCH v3 0/4] PHY: Add multilink DP support in Cadence Torrent PHY driver   Vinod Koul
• [PATCH 0/7] Power down serdes lanes and CMUs initially   Vinod Koul
• Build regressions/improvements in v6.4-rc1   Geert Uytterhoeven
  • Build regressions/improvements in v6.4-rc1   Pratyush Yadav
    • Build regressions/improvements in v6.4-rc1   Geert Uytterhoeven
    • Build regressions/improvements in v6.4-rc1   Raghavendra, Vignesh
• [PATCH v2 1/2] phy: cadence: salvo: Add usb2-disconnect-threshold-microvolt property   Frank Li
  • [PATCH v2 2/2] dt-bindings: phy: cdns,salvo: add property usb2-disconnect-threshold-microvolt   Frank Li
    • [PATCH v2 2/2] dt-bindings: phy: cdns,salvo: add property usb2-disconnect-threshold-microvolt   Krzysztof Kozlowski
• [PATCH v2] phy: cadence: Sierra: Add single link SGMII register configuration   Marcin Wierzbicki
  • [PATCH v2] phy: cadence: Sierra: Add single link SGMII register configuration   Roger Quadros
  • [PATCH v2] phy: cadence: Sierra: Add single link SGMII register configuration   Uwe Kleine-König
  • [PATCH v2] phy: cadence: Sierra: Add single link SGMII register configuration   Marcin Wierzbicki
  • [PATCH v2] phy: cadence: Sierra: Add single link SGMII register configuration   Vinod Koul
• [PATCH v2 0/2] phy: hisilicon: Add inno-usb2-phy driver for Hi3798MV100   David Yang
  • [PATCH v2 1/2] phy: hisilicon: Add inno-usb2-phy driver for Hi3798MV100   David Yang
  • [PATCH v2 2/2] phy: hisilicon: Allow building phy-hisi-inno-usb2 on ARM32   David Yang
  • [PATCH v2 0/2] phy: hisilicon: Add inno-usb2-phy driver for Hi3798MV100   Vinod Koul
• [PATCH v11 0/9] Enable IPQ9754 USB   Varadarajan Narayanan
  • [PATCH v11 1/9] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible   Varadarajan Narayanan
  • [PATCH v11 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Varadarajan Narayanan
    • [PATCH v11 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY   Krzysztof Kozlowski
  • [PATCH v11 3/9] dt-bindings: usb: dwc3: Add IPQ9574 compatible   Varadarajan Narayanan
  • [PATCH v11 4/9] clk: qcom: gcc-ipq9574: Add USB related clocks   Varadarajan Narayanan
  • [PATCH v11 5/9] phy: qcom-qusb2: add QUSB2 support for IPQ9574   Varadarajan Narayanan
  • [PATCH v11 6/9] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence   Varadarajan Narayanan
  • [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
    • [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes   Kathiravan T
      • [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes   Varadarajan Narayanan
  • [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Varadarajan Narayanan
    • [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Dmitry Baryshkov
      • [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Varadarajan Narayanan
      • [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node   Dmitry Baryshkov
  • [PATCH v11 9/9] arm64: dts: qcom: ipq9574: Enable USB   Varadarajan Narayanan
    • [PATCH v11 9/9] arm64: dts: qcom: ipq9574: Enable USB   Dmitry Baryshkov
  • [PATCH v11 0/9] Enable IPQ9754 USB   Vinod Koul
• [PATCH v2 0/8] phy: qcom-qmp-combo: Support orientation switching   Bjorn Andersson
  • [PATCH v2 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Bjorn Andersson
    • [PATCH v2 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Krzysztof Kozlowski
  • [PATCH v2 2/8] phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit   Bjorn Andersson
  • [PATCH v2 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops   Bjorn Andersson
    • [PATCH v2 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops   Johan Hovold
  • [PATCH v2 4/8] phy: qcom-qmp-combo: Introduce orientation variable   Bjorn Andersson
    • [PATCH v2 4/8] phy: qcom-qmp-combo: Introduce orientation variable   Johan Hovold
  • [PATCH v2 5/8] phy: qcom-qmp-combo: Introduce orientation switching   Bjorn Andersson
  • [PATCH v2 6/8] phy: qcom-qmp-combo: Introduce drm_bridge   Bjorn Andersson
    • [PATCH v2 6/8] phy: qcom-qmp-combo: Introduce drm_bridge   Johan Hovold
  • [PATCH v2 7/8] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Bjorn Andersson
    • [PATCH v2 7/8] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Johan Hovold
  • [PATCH v2 8/8] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph   Bjorn Andersson
    • [PATCH v2 8/8] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph   Johan Hovold
• [PATCH v3 1/2] phy: cadence: salvo: Add cdns,usb2-disconnect-threshold-microvolt property   Frank Li
  • [PATCH v3 2/2] dt-bindings: phy: cdns,salvo: add property cdns,usb2-disconnect-threshold-microvolt   Frank Li
    • [PATCH v3 2/2] dt-bindings: phy: cdns,salvo: add property cdns,usb2-disconnect-threshold-microvolt   Krzysztof Kozlowski
  • [PATCH v3 1/2] phy: cadence: salvo: Add cdns,usb2-disconnect-threshold-microvolt property   Vinod Koul
    • [EXT] Re: [PATCH v3 1/2] phy: cadence: salvo: Add cdns,usb2-disconnect-threshold-microvolt property   Frank Li
• [PATCH AUTOSEL 6.3 3/9] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH AUTOSEL 6.2 3/9] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH AUTOSEL 6.1 2/8] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH AUTOSEL 5.15 1/4] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH AUTOSEL 5.10 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH AUTOSEL 5.4 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH AUTOSEL 4.19 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH AUTOSEL 4.14 1/2] phy: st: miphy28lp: use _poll_timeout functions for waits   Sasha Levin
• [PATCH v14 03/15] dt-bindings: Convert gpio-mmio to yaml   Bartosz Golaszewski
• [PATCH v4 0/3] arm64: meson: support Amlogic A1 USB OTG controller   Dmitry Rokosov
  • [PATCH v4 1/3] usb: dwc2: support dwc2 IP for Amlogic A1 SoC family   Dmitry Rokosov
  • [PATCH v4 3/3] usb: dwc3-meson-g12a: support OTG switch for all IP versions   Dmitry Rokosov
• [PATCH v4 2/3] dt-bindings: usb: dwc2: add support for Amlogic A1 SoC USB peripheral   Dmitry Rokosov
• [PATCH v4 00/13] drm/meson: add support for MIPI DSI Display   Neil Armstrong
  • [PATCH v4 03/13] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF   Neil Armstrong
  • [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Neil Armstrong
    • [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Conor Dooley
    • [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Krzysztof Kozlowski
      • [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Neil Armstrong
      • [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Krzysztof Kozlowski
      • [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   neil.armstrong at linaro.org
      • [PATCH v4 04/13] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Krzysztof Kozlowski
  • [PATCH v4 05/13] dt-bindings: display: meson-vpu: add third DPI output port   Neil Armstrong
  • [PATCH v4 06/13] drm/meson: fix unbind path if HDMI fails to bind   Neil Armstrong
  • [PATCH v4 07/13] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Neil Armstrong
  • [PATCH v4 08/13] drm/meson: add DSI encoder   Neil Armstrong
  • [PATCH v4 09/13] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
  • [PATCH v4 10/13] phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value   Neil Armstrong
    • [PATCH v4 10/13] phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value   Vinod Koul
  • [PATCH v4 11/13] drm/panel: khadas-ts050: update timings to achieve 60Hz refresh rate   Neil Armstrong
  • [PATCH v4 12/13] arm64: meson: g12-common: add the MIPI DSI nodes   Neil Armstrong
  • [PATCH v4 13/13] DONOTMERGE: arm64: meson: khadas-vim3l: add DSI panel   Neil Armstrong
• [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Neil Armstrong
  • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Krzysztof Kozlowski
    • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Neil Armstrong
      • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Krzysztof Kozlowski
      • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Krzysztof Kozlowski
      • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   neil.armstrong at linaro.org
      • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Arnd Bergmann
      • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Neil Armstrong
      • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Jerome Brunet
      • [PATCH v4 01/13] dt-bindings: clk: g12a-clkc: export VCLK2_SEL and add CTS_ENCL clock ids   Krzysztof Kozlowski
• [PATCH v4 02/13] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks   Neil Armstrong
• [PATCH RESEND v9 1/2] phy: core: add debugfs files   Chunfeng Yun
  • [PATCH RESEND v9 2/2] phy: mediatek: tphy: add debugfs files   Chunfeng Yun
  • [PATCH RESEND v9 1/2] phy: core: add debugfs files   Vinod Koul
• [PATCH v3 0/8] phy: qcom-qmp-combo: Support orientation switching   Bjorn Andersson
  • [PATCH v3 1/8] dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Add ports and orientation-switch   Bjorn Andersson
  • [PATCH v3 2/8] phy: qcom-qmp-combo: Move phy_mutex out of com_init/exit   Bjorn Andersson
  • [PATCH v3 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops   Bjorn Andersson
  • [PATCH v3 4/8] phy: qcom-qmp-combo: Introduce orientation variable   Bjorn Andersson
  • [PATCH v3 5/8] phy: qcom-qmp-combo: Introduce orientation switching   Bjorn Andersson
  • [PATCH v3 6/8] phy: qcom-qmp-combo: Introduce drm_bridge   Bjorn Andersson
  • [PATCH v3 7/8] arm64: dts: qcom: sc8280xp-crd: Add QMP to SuperSpeed graph   Bjorn Andersson
  • [PATCH v3 8/8] arm64: dts: qcom: sc8280xp-x13s: Add QMP to SuperSpeed graph   Bjorn Andersson
  • [PATCH v3 0/8] phy: qcom-qmp-combo: Support orientation switching   Vinod Koul
  • (subset) [PATCH v3 0/8] phy: qcom-qmp-combo: Support orientation switching   Bjorn Andersson
• (subset) [PATCH v3 0/5] arm64: qcom: sa8775p: add support for UFS   Bjorn Andersson
• (subset) [PATCH v2 0/6] arm64: qcom: sa8775p: add support for USB   Bjorn Andersson
• [PATCH v3 4/5] arm64: dts: qcom: sa8775p: add UFS nodes   Manivannan Sadhasivam
• [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Julien Stephan
  • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   AngeloGioacchino Del Regno
  • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Krzysztof Kozlowski
    • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Julien Stephan
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Krzysztof Kozlowski
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Kevin Hilman
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Krzysztof Kozlowski
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Kevin Hilman
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Krzysztof Kozlowski
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Kevin Hilman
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Krzysztof Kozlowski
      • [PATCH v2 1/2] dt-bindings: phy: add mediatek mipi csi driver v 0.5   Chunfeng Yun (云春峰)
• [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
  • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   AngeloGioacchino Del Regno
    • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
      • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   AngeloGioacchino Del Regno
      • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
    • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
      • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   AngeloGioacchino Del Regno
      • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
      • [PATCH v2 2/2] phy: mtk-mipi-csi: add driver for CSI phy   AngeloGioacchino Del Regno
• [PATCH v4 0/3] arm64: qcom: sa8775p: add support for UFS   Bartosz Golaszewski
  • [PATCH v4 1/3] dt-bindings: ufs: qcom: add compatible for sa8775p   Bartosz Golaszewski
  • [PATCH v4 2/3] arm64: dts: qcom: sa8775p: add UFS nodes   Bartosz Golaszewski
  • [PATCH v4 3/3] arm64: dts: qcom: sa8775p-ride: enable UFS   Bartosz Golaszewski
  • [PATCH v4 0/3] arm64: qcom: sa8775p: add support for UFS   Konrad Dybcio
    • [PATCH v4 0/3] arm64: qcom: sa8775p: add support for UFS   Bartosz Golaszewski
• [PATCH] arm64: dts: qcom: sa8775p: mark the UFS controller as dma-coherent   Bartosz Golaszewski
  • [PATCH] arm64: dts: qcom: sa8775p: mark the UFS controller as dma-coherent   Manivannan Sadhasivam
  • [PATCH] arm64: dts: qcom: sa8775p: mark the UFS controller as dma-coherent   Bjorn Andersson
• [PATCH] phy: ti: gmii-sel: Allow parent to not be syscon node   Andrew Davis
  • [PATCH] phy: ti: gmii-sel: Allow parent to not be syscon node   Siddharth Vadapalli
  • [PATCH] phy: ti: gmii-sel: Allow parent to not be syscon node   Roger Quadros
• [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Bartosz Golaszewski
  • [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Bartosz Golaszewski
    • [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Bartosz Golaszewski
      • [PATCH v3 1/5] dt-bindings: ufs: qcom: add compatible for sa8775p   Martin K. Petersen
• [PATCH -next] phy: freescale: imx8m-pcie: Use devm_platform_ioremap_resource()   Vinod Koul
• [PATCH v2 0/3] PHY-GMII-SEL: Add support for SGMII mode   Vinod Koul
• [PATCH 0/2] PHY-GMII-SEL: Add support for J784S4 SoC   Vinod Koul
• [PATCH v11 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bhupesh Sharma
  • [PATCH v11 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Bhupesh Sharma
    • [PATCH v11 1/4] dt-bindings: phy: qcom,qmp-usb: Drop legacy bindings and move to newer one (SM6115 & QCM2290)   Krzysztof Kozlowski
  • [PATCH v11 2/4] phy: qcom-qmp-usb: add support for updated qcm2290 / sm6115 binding   Bhupesh Sharma
  • [PATCH v11 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node   Bhupesh Sharma
  • [PATCH v11 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node   Bhupesh Sharma
  • [PATCH v11 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Vinod Koul
  • (subset) [PATCH v11 0/4] Enable USB SS qmp phy for Qualcomm SM6115 SoC   Bjorn Andersson
• [PATCH v4 0/6] phy: cadence: salvo: some fixes and workarounds   Frank Li
  • [PATCH v4 1/6] phy: cadence: salvo: add access for USB2PHY   Frank Li
  • [PATCH v4 2/6] phy: cadence: salvo: decrease delay value to zero for txvalid   Frank Li
  • [PATCH v4 3/6] phy: cadence: salvo: add bist fix   Frank Li
    • [PATCH v4 3/6] phy: cadence: salvo: add bist fix   Vinod Koul
  • [PATCH v4 4/6] phy: cadence: salvo: add .set_mode API   Frank Li
    • [PATCH v4 4/6] phy: cadence: salvo: add .set_mode API   Vinod Koul
  • [PATCH v4 5/6] phy: cadence: salvo: Add cdns,usb2-disconnect-threshold-microvolt property   Frank Li
  • [PATCH v4 6/6] dt-bindings: phy: cdns,salvo: add property cdns,usb2-disconnect-threshold-microvolt   Frank Li
• [PATCH v2 0/2] Add phy tuning support for imx8mq-usb   Johannes Zink
  • [PATCH v2 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Johannes Zink
    • [PATCH v2 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties   Krzysztof Kozlowski
  • [PATCH v2 2/2] phy: fsl-imx8mp-usb: add support for phy tuning   Johannes Zink
  • [PATCH v2 0/2] Add phy tuning support for imx8mq-usb   Vinod Koul
• [PATCH] phy: mediatek: Avoid floating point constants   Jon Hunter
  • [PATCH] phy: mediatek: Avoid floating point constants   Vinod Koul
• [PATCH v5 0/6] phy: cadence: salvo: some fixes and workarounds   Frank Li
  • [PATCH v5 1/6] phy: cadence: salvo: add access for USB2PHY   Frank Li
  • [PATCH v5 2/6] phy: cadence: salvo: decrease delay value to zero for txvalid   Frank Li
  • [PATCH v5 3/6] phy: cadence: salvo: add bist fix   Frank Li
  • [PATCH v5 4/6] phy: cadence: salvo: add .set_mode API   Frank Li
  • [PATCH v5 5/6] phy: cadence: salvo: Add cdns,usb2-disconnect-threshold-microvolt property   Frank Li
  • [PATCH v5 6/6] dt-bindings: phy: cdns,salvo: add property cdns,usb2-disconnect-threshold-microvolt   Frank Li
  • [PATCH v5 0/6] phy: cadence: salvo: some fixes and workarounds   Vinod Koul
• [PATCH v3 06/65] clk: at91: main: Add a determine_rate hook   Claudiu.Beznea at microchip.com
• [PATCH v3 07/65] clk: at91: sckc: Add a determine_rate hook   Claudiu.Beznea at microchip.com
• [PATCH v3 46/65] clk: at91: smd: Switch to determine_rate   Claudiu.Beznea at microchip.com
• [PATCH v6 0/7] Add JH7110 USB and USB PHY driver support   Minda Chen
  • [PATCH v6 0/7] Add JH7110 USB and USB PHY driver support   Roger Quadros
    • [PATCH v6 0/7] Add JH7110 USB and USB PHY driver support   Minda Chen
• [PATCH v6 1/7] dt-bindings: phy: Add StarFive JH7110 USB PHY   Minda Chen
• [PATCH v6 2/7] dt-bindings: phy: Add StarFive JH7110 PCIe PHY   Minda Chen
• [PATCH v6 3/7] phy: starfive: Add JH7110 USB 2.0 PHY driver   Minda Chen
• [PATCH v6 4/7] phy: starfive: Add JH7110 PCIE 2.0 PHY driver   Minda Chen
• [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller   Minda Chen
  • [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller   Conor Dooley
    • [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller   Minda Chen
      • [PATCH v6 5/7] dt-bindings: usb: Add StarFive JH7110 USB controller   Conor Dooley
• [PATCH v6 6/7] usb: cdns3: Add StarFive JH7110 USB driver   Minda Chen
  • [PATCH v6 6/7] usb: cdns3: Add StarFive JH7110 USB driver   Greg Kroah-Hartman
    • [PATCH v6 6/7] usb: cdns3: Add StarFive JH7110 USB driver   Greg Kroah-Hartman
• [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110   Minda Chen
  • [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110   Conor Dooley
    • [PATCH v6 7/7] riscv: dts: starfive: Add USB dts configuration for JH7110   Greg Kroah-Hartman
• [PATCH RFC 0/3] Support VBUSEN selection control for RZ/G2L   Biju Das
  • [PATCH RFC 3/3] phy: renesas: phy-rcar-gen3-usb2: Control VBUSEN selection   Biju Das
• [PATCH v1 2/3] usb: phy: Add driver for the Realtek SoC USB 2.0/3.0 PHY   Arnd Bergmann
  • [PATCH v1 2/3] usb: phy: Add driver for the Realtek SoC USB 2.0/3.0 PHY   Paul Cercueil
    • [PATCH v1 2/3] usb: phy: Add driver for the Realtek SoC USB 2.0/3.0 PHY   Arnd Bergmann
      • [PATCH v1 2/3] usb: phy: Add driver for the Realtek SoC USB 2.0/3.0 PHY   Vinod Koul
  • [PATCH v1 2/3] usb: phy: Add driver for the Realtek SoC USB 2.0/3.0 PHY   kernel test robot
• [PATCH V2 0/2] Add support for PCIe PHY in IPQ9574   Devi Priya
  • [PATCH V2 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Devi Priya
    • [PATCH V2 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Rob Herring
      • [PATCH V2 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Devi Priya
    • [PATCH V2 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Dmitry Baryshkov
      • [PATCH V2 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Devi Priya
    • [PATCH V2 1/2] dt-bindings: phy: qcom,qmp-pcie: Add ipq9574 bindings   Krzysztof Kozlowski
  • [PATCH V2 2/2] phy: qcom-qmp-pcie: Add support for IPQ9574 g3x1 and g3x2 PCIEs   Devi Priya
• [PATCH v2 0/5] phy: qcom-qmp-usb: split away legacy USB+DP code   Dmitry Baryshkov
  • [PATCH v2 1/5] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: add sm8150 USB+DP PHY   Dmitry Baryshkov
  • [PATCH v2 2/5] phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform   Dmitry Baryshkov
  • [PATCH v2 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY   Dmitry Baryshkov
    • [PATCH v2 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY   Caleb Connolly
      • [PATCH v2 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY   Dmitry Baryshkov
  • [PATCH v2 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings   Dmitry Baryshkov
    • [PATCH v2 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings   Krzysztof Kozlowski
      • [PATCH v2 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings   Dmitry Baryshkov
  • [PATCH v2 5/5] phy: qcom-qmp-usb: split off the legacy USB+dp_com support   Dmitry Baryshkov
• [PATCH] dt-bindings: phy: qcom,qmp-usb: fix bindings error   Dmitry Baryshkov
  • [PATCH] dt-bindings: phy: qcom,qmp-usb: fix bindings error   bhupesh.sharma at linaro.org
  • [PATCH] dt-bindings: phy: qcom,qmp-usb: fix bindings error   Conor Dooley
    • [PATCH] dt-bindings: phy: qcom,qmp-usb: fix bindings error   Conor Dooley
  • [PATCH] dt-bindings: phy: qcom,qmp-usb: fix bindings error   Vinod Koul
• [RESEND PATCH v2 0/5] phy: qcom-qmp-usb: split away legacy USB+DP code   Dmitry Baryshkov
  • [RESEND PATCH v2 1/5] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: add sm8150 USB+DP PHY   Dmitry Baryshkov
  • [RESEND PATCH v2 2/5] phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform   Dmitry Baryshkov
  • [RESEND PATCH v2 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY   Dmitry Baryshkov
  • [RESEND PATCH v2 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings   Dmitry Baryshkov
  • [RESEND PATCH v2 5/5] phy: qcom-qmp-usb: split off the legacy USB+dp_com support   Dmitry Baryshkov
• [PATCH v3 00/10] phy: qcom-qmp-combo: convert to newer style of bindings   Dmitry Baryshkov
  • [PATCH v3 01/10] dt-bindings: phy: migrate combo QMP PHY bindings to qcom,sc8280xp-qmp-usb43dp-phy.yaml   Dmitry Baryshkov
  • [PATCH v3 02/10] phy: qcom-qmp-combo: simplify clock handling   Dmitry Baryshkov
  • [PATCH v3 03/10] phy: qcom-qmp-combo: populate offsets for all combo PHYs   Dmitry Baryshkov
  • [PATCH v3 04/10] phy: qcom-qmp-combo: add qcom,sc7280-qmp-usb3-dp-phy compat entry   Dmitry Baryshkov
  • [PATCH v3 05/10] arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v3 05/10] arm64: dts: qcom: sc7180: switch USB+DP QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v3 06/10] arm64: dts: qcom: sc7280: link usb3_phy_wrapper_gcc_usb30_pipe_clk   Dmitry Baryshkov
  • [PATCH v3 07/10] arm64: dts: qcom: sc7280: switch USB+DP QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 08/10] arm64: dts: qcom: sdm845: switch USB+DP QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 09/10] arm64: dts: qcom: sm8150: switch USB+DP QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 10/10] arm64: dts: qcom: sm8250: switch USB+DP QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v2 00/11] phy: qcom-qmp-ufs: convert to newer style of bindings   Dmitry Baryshkov
  • [PATCH v2 01/11] dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml   Dmitry Baryshkov
  • [PATCH v2 02/11] phy: qcom-qmp-ufs: populate offsets configuration   Dmitry Baryshkov
  • [PATCH v2 03/11] arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 03/11] arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v2 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
      • [PATCH v2 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v2 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v2 06/11] arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 06/11] arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v2 07/11] arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 07/11] arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v2 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v2 09/11] arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 09/11] arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v2 10/11] arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 10/11] arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v2 11/11] arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v2 11/11] arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
• [PATCH v4 0/3] Add JH7110 MIPI DPHY RX support   Changhuang Liang
  • [PATCH v4 0/3] Add JH7110 MIPI DPHY RX support   Conor Dooley
    • [PATCH v4 0/3] Add JH7110 MIPI DPHY RX support   Changhuang Liang
      • [PATCH v4 0/3] Add JH7110 MIPI DPHY RX support   Conor Dooley
      • [PATCH v4 0/3] Add JH7110 MIPI DPHY RX support   Changhuang Liang
• [PATCH v3 0/7] phy-rockchip-inno-usb2: add RK3588 support   Sebastian Reichel
  • [PATCH v3 2/7] phy: phy-rockchip-inno-usb2: add rk3588 support   Sebastian Reichel
  • [PATCH v3 3/7] phy: phy-rockchip-inno-usb2: add reset support   Sebastian Reichel
  • [PATCH v3 4/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support   Sebastian Reichel
  • [PATCH v3 5/7] phy: phy-rockchip-inno-usb2: simplify phy clock handling   Sebastian Reichel
  • [PATCH v3 6/7] phy: phy-rockchip-inno-usb2: simplify getting match data   Sebastian Reichel
  • [PATCH v3 7/7] phy: phy-rockchip-inno-usb2: improve error message   Sebastian Reichel
• [PATCH v3 1/7] dt-bindings: phy: rockchip,inno-usb2phy: add rk3588   Sebastian Reichel
• [PATCH v3] phy: cadence: Sierra: Add single link SGMII register configuration   Marcin Wierzbicki
  • [PATCH v3] phy: cadence: Sierra: Add single link SGMII register configuration   Roger Quadros
  • [PATCH v3] phy: cadence: Sierra: Add single link SGMII register configuration   Marcin Wierzbicki
• [PATCH v2 0/6] Add RK3588 SATA support   Sebastian Reichel
  • [PATCH v2 1/6] dt-bindings: soc: rockchip: add rk3588 pipe-phy syscon   Sebastian Reichel
  • [PATCH v2 2/6] dt-bindings: ata: ahci: add RK3588 AHCI controller   Sebastian Reichel
    • [PATCH v2 2/6] dt-bindings: ata: ahci: add RK3588 AHCI controller   Conor Dooley
  • [PATCH v2 3/6] dt-bindings: ata: ahci: dwc: enforce rockchip clocks   Sebastian Reichel
  • [PATCH v2 4/6] dt-bindings: phy: rockchip: rk3588 has two reset lines   Sebastian Reichel
    • [PATCH v2 4/6] dt-bindings: phy: rockchip: rk3588 has two reset lines   Conor Dooley
  • [PATCH v2 5/6] arm64: dts: rockchip: rk3588: add combo PHYs   Sebastian Reichel
  • [PATCH v2 6/6] arm64: dts: rockchip: rk3588: add SATA support   Sebastian Reichel
  • [PATCH v2 0/6] Add RK3588 SATA support   Serge Semin
• [PATCH] phy: qcom-snps: Fix kerneldoc warning   Dmitry Baryshkov
• [PATCH 00/15] drm/msm/hdmi & phy: use generic PHY framework   Dmitry Baryshkov
  • [PATCH 01/15] phy: Add HDMI configuration options   Dmitry Baryshkov
  • [PATCH 02/15] phy: qualcomm: add QMP HDMI PHY driver   Dmitry Baryshkov
  • [PATCH 03/15] phy: qualcomm: add MSM8960 HDMI PHY driver   Dmitry Baryshkov
  • [PATCH 04/15] phy: qualcomm: add MSM8x60 HDMI PHY driver   Dmitry Baryshkov
  • [PATCH 05/15] phy: qcom: apq8064-sata: extract UNI PLL register defines   Dmitry Baryshkov
  • [PATCH 06/15] phy: qcom-uniphy: add more registers from display PHYs   Dmitry Baryshkov
  • [PATCH 07/15] phy: qualcomm: add MSM8974 HDMI PHY driver   Dmitry Baryshkov
  • [PATCH 08/15] drm/msm/hdmi: move the alt_iface clock to the hpd list   Dmitry Baryshkov
  • [PATCH 09/15] drm/msm/hdmi: simplify extp clock handling   Dmitry Baryshkov
  • [PATCH 10/15] drm/msm/hdmi: correct indentation of HDMI bridge functions   Dmitry Baryshkov
  • [PATCH 11/15] drm/msm/hdmi: switch to atomic_pre_enable/post_disable   Dmitry Baryshkov
  • [PATCH 12/15] drm/msm/hdmi: set infoframes on all pre_enable calls   Dmitry Baryshkov
  • [PATCH 13/15] drm/msm/hdmi: pair msm_hdmi_phy_powerup with msm_hdmi_phy_powerdown   Dmitry Baryshkov
  • [PATCH 14/15] drm/msm/hdmi: switch to generic PHY subsystem   Dmitry Baryshkov
  • [PATCH 15/15] drm/msm/hdmi: drop old HDMI PHY code   Dmitry Baryshkov
  • [PATCH 00/15] drm/msm/hdmi & phy: use generic PHY framework   Dmitry Baryshkov
• [PATCH v3 00/11] phy: qcom-qmp-ufs: convert to newer style of bindings   Dmitry Baryshkov
  • [PATCH v3 01/11] dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml   Dmitry Baryshkov
  • [PATCH v3 02/11] phy: qcom-qmp-ufs: populate offsets configuration   Dmitry Baryshkov
  • [PATCH v3 03/11] arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v3 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v3 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
    • [PATCH v3 05/11] arm64: dts: qcom: sdm845: switch UFS QMP PHY to new style of bindings   Konrad Dybcio
  • [PATCH v3 06/11] arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 07/11] arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 09/11] arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 10/11] arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
  • [PATCH v3 11/11] arm64: dts: qcom: sm8450: switch UFS QMP PHY to new style of bindings   Dmitry Baryshkov
• [PATCH v3 0/3] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
  • [PATCH v3 2/3] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5   Julien Stephan
    • [PATCH v3 2/3] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5   AngeloGioacchino Del Regno
      • [PATCH v3 2/3] dt-bindings: phy: add mediatek MIPI CD-PHY module v0.5   Julien Stephan
  • [PATCH v3 3/3] phy: mtk-mipi-csi: add driver for CSI phy   Julien Stephan
• [PATCH v3 1/3] dt-bindings: phy: add PHY_TYPE_CDPHY definition   Julien Stephan
  • [PATCH v3 1/3] dt-bindings: phy: add PHY_TYPE_CDPHY definition   AngeloGioacchino Del Regno
• [PATCH 3/5] ARM: Add qcom,usb-hs-phy-msm8960 to qcom,usb-hs-phy.yaml   Rudraksha Gupta
  • [PATCH 3/5] ARM: Add qcom,usb-hs-phy-msm8960 to qcom,usb-hs-phy.yaml   Krzysztof Kozlowski
• [PATCH 0/3] MediaTek MIPI-DSI PHY: Cleanups   AngeloGioacchino Del Regno
  • [PATCH 1/3] phy: mediatek: mipi-dsi: Convert to register clk_hw   AngeloGioacchino Del Regno
  • [PATCH 2/3] phy: mediatek: mipi-dsi: Use devm variant for of_clk_add_hw_provider()   AngeloGioacchino Del Regno
  • [PATCH 3/3] phy: mediatek: mipi-dsi: Compress of_device_id match entries   AngeloGioacchino Del Regno
• [PATCH v2 0/4] Samsung Galaxy Express SGH-I437 Support   Rudraksha Gupta
  • [PATCH v2 0/4] Samsung Galaxy Express SGH-I437 Support   Krzysztof Kozlowski
• [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Rudraksha Gupta
  • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Conor Dooley
    • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Rudraksha Gupta
      • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Conor Dooley
      • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Konrad Dybcio
      • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Rudraksha Gupta
      • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Conor Dooley
      • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Rudraksha Gupta
  • [PATCH v2 1/4] dt-bindings: arm: qcom: Add Samsung Galaxy Express   Krzysztof Kozlowski
• [PATCH v2 2/4] dt-bindings: Add qcom,usb-hs-phy-msm8960   Rudraksha Gupta
  • [PATCH v2 2/4] dt-bindings: Add qcom,usb-hs-phy-msm8960   Conor Dooley
  • [PATCH v2 2/4] dt-bindings: Add qcom,usb-hs-phy-msm8960   Krzysztof Kozlowski
    • [PATCH v2 2/4] dt-bindings: Add qcom,usb-hs-phy-msm8960   Rudraksha Gupta
      • [PATCH v2 2/4] dt-bindings: Add qcom,usb-hs-phy-msm8960   Dmitry Baryshkov
• [PATCH v2 3/4] ARM: dts: qcom: msm8960: Add USB node   Rudraksha Gupta
  • [PATCH v2 3/4] ARM: dts: qcom: msm8960: Add USB node   Krzysztof Kozlowski
• [PATCH v2 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support   Rudraksha Gupta
  • [PATCH v2 4/4] ARM: dts: qcom: Add Samsung Galaxy Express support   Krzysztof Kozlowski
• [GIT PULL]: Generic phy fixes for v6.4   Vinod Koul
  • [GIT PULL]: Generic phy fixes for v6.4   pr-tracker-bot at kernel.org
• [PATCH v5 0/3] Add JH7110 MIPI DPHY RX support   Changhuang Liang
  • [PATCH v5 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
    • [PATCH v5 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Conor Dooley
      • [PATCH v5 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx   Changhuang Liang
  • [PATCH v5 0/3] Add JH7110 MIPI DPHY RX support   Conor Dooley
    • [PATCH v5 0/3] Add JH7110 MIPI DPHY RX support   Changhuang Liang
• [PATCH v5 2/3] phy: starfive: Add mipi dphy rx support   Changhuang Liang
• [PATCH v5 3/3] riscv: dts: starfive: Add dphy rx node   Changhuang Liang
• [PATCH 01/27] dt-bindings: pwm: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH 16/27] arm64: dts: mediatek: mt6795: Add support for the CMDQ/GCE mailbox   Matthias Brugger
• [PATCH 17/27] arm64: dts: mediatek: mt6795: Add MMSYS node for multimedia clocks   Matthias Brugger
• [PATCH 18/27] arm64: dts: mediatek: mt6795: Add support for IOMMU and LARBs   Matthias Brugger
• [PATCH 21/27] arm64: dts: mediatek: mt6795: Add PMIC Wrapper node   Matthias Brugger
• [PATCH 23/27] arm64: dts: mediatek: Add MT6331 PMIC devicetree   Matthias Brugger
• [PATCH 24/27] arm64: dts: mediatek: mt6795-xperia-m5: Add MT6331 Combo PMIC   Matthias Brugger
• [PATCH 25/27] arm64: dts: mediatek: mt6795-xperia-m5: Add eMMC, MicroSD slot, SDIO   Matthias Brugger
• [PATCH 02/27] dt-bindings: phy: mediatek,dsi-phy: Add compatible for MT6795 Helio X10   Matthias Brugger
• [PATCH 03/27] dt-bindings: display: mediatek: dpi: Add compatible for MediaTek MT6795   Matthias Brugger
• [PATCH v2 2/3] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0/3.0 PHY   Greg Kroah-Hartman
  • [PATCH v2 2/3] phy: realtek: usb: Add driver for the Realtek SoC USB 2.0/3.0 PHY   Greg Kroah-Hartman
• [PATCH v2 1/3] usb: phy: add usb phy notify port status API   Greg Kroah-Hartman
  • [PATCH v2 1/3] usb: phy: add usb phy notify port status API   Greg Kroah-Hartman
• [PATCH RFC 0/2] Clock fixes for qcom-snps-femto-v2 PHY driver   Adrien Thierry
  • [PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock   Adrien Thierry
    • [PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock   Bjorn Andersson
      • [PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock   Adrien Thierry
      • [PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock   Bjorn Andersson
    • [PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock   Andrew Halaney
  • [PATCH RFC 2/2] phy: qcom-snps-femto-v2: Remove AHB2PHY interface clock   Adrien Thierry
    • [PATCH RFC 2/2] phy: qcom-snps-femto-v2: Remove AHB2PHY interface clock   Bjorn Andersson
• [PATCH v2 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY   Conor Dooley
  • [PATCH v2 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY   Conor Dooley
  • [PATCH v2 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY   Krzysztof Kozlowski
  • [PATCH v2 3/3] dt-bindings: phy: realtek: Add the doc about the Realtek SoC USB 2.0/3.0 PHY   Krzysztof Kozlowski
• [PATCH v5 00/17] drm/meson: add support for MIPI DSI Display   Neil Armstrong
  • [PATCH v5 01/17] clk: meson: g12a: prefix private CLK IDs defines with PRIV   Neil Armstrong
    • [PATCH v5 01/17] clk: meson: g12a: prefix private CLK IDs defines with PRIV   Jerome Brunet
      • [PATCH v5 01/17] clk: meson: g12a: prefix private CLK IDs defines with PRIV   Neil Armstrong
      • [PATCH v5 01/17] clk: meson: g12a: prefix private CLK IDs defines with PRIV   Jerome Brunet
  • [PATCH v5 02/17] clk: meson: g12a: add CTS_ENCL & CTS_ENCL_SEL clocks   Neil Armstrong
  • [PATCH v5 03/17] dt-bindings: clk: g12a-clkc: add VCLK2_SEL and CTS_ENCL clock ids   Neil Armstrong
    • [PATCH v5 03/17] dt-bindings: clk: g12a-clkc: add VCLK2_SEL and CTS_ENCL clock ids   Conor Dooley
  • [PATCH v5 04/17] clk: meson: g12: use VCLK2_SEL, CTS_ENCL & CTS_ENCL_SEL public CLK IDs   Neil Armstrong
  • [PATCH v5 05/17] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF   Neil Armstrong
    • [PATCH v5 05/17] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF   Jerome Brunet
      • [PATCH v5 05/17] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF   Neil Armstrong
      • [PATCH v5 05/17] clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF   Martin Blumenstingl
  • [PATCH v5 06/17] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Neil Armstrong
    • [PATCH v5 06/17] dt-bindings: display: add Amlogic MIPI DSI Host Controller bindings   Conor Dooley
  • [PATCH v5 07/17] dt-bindings: display: meson-vpu: add third DPI output port   Neil Armstrong
  • [PATCH v5 08/17] drm/meson: fix unbind path if HDMI fails to bind   Neil Armstrong
    • [PATCH v5 08/17] drm/meson: fix unbind path if HDMI fails to bind   Nicolas Belin
  • [PATCH v5 09/17] drm/meson: only use components with dw-hdmi   Neil Armstrong
    • [PATCH v5 09/17] drm/meson: only use components with dw-hdmi   Nicolas Belin
  • [PATCH v5 10/17] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Neil Armstrong
    • [PATCH v5 10/17] drm/meson: venc: add ENCL encoder setup for MIPI-DSI output   Nicolas Belin
  • [PATCH v5 11/17] drm/meson: add DSI encoder   Neil Armstrong
    • [PATCH v5 11/17] drm/meson: add DSI encoder   Nicolas Belin
  • [PATCH v5 12/17] drm/meson: add support for MIPI-DSI transceiver   Neil Armstrong
    • [PATCH v5 12/17] drm/meson: add support for MIPI-DSI transceiver   Nicolas Belin
  • [PATCH v5 13/17] drm/panel: khadas-ts050: update timings to achieve 60Hz refresh rate   Neil Armstrong
    • [PATCH v5 13/17] drm/panel: khadas-ts050: update timings to achieve 60Hz refresh rate   Nicolas Belin
  • [PATCH v5 14/17] arm64: meson: g12-common: add the MIPI DSI nodes   Neil Armstrong
  • [PATCH v5 15/17] DONOTMERGE: arm64: meson: khadas-vim3l: add DSI panel   Neil Armstrong
  • [PATCH v5 16/17] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module   Neil Armstrong
    • [PATCH v5 16/17] dt-bindings: arm: amlogic: Document the MNT Reform 2 CM4 adapter with a BPI-CM4 Module   Conor Dooley
  • [PATCH v5 17/17] arm64: dts: amlogic: meson-g12b-bananapi-cm4: add support for MNT Reform2 with CM4 adaper   Neil Armstrong
• [PATCH] phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test   Guillaume Ranquet
  • [PATCH] phy: mediatek: hdmi: mt8195: fix prediv bad upper limit test   AngeloGioacchino Del Regno
• [PATCH 0/2] PHY: Add support for single link USXGMII in Cadence Torrent PHY driver   Swapnil Jakhade
  • [PATCH 1/2] phy: cadence-torrent: Add single link USXGMII configuration for 156.25MHz refclk   Swapnil Jakhade
    • [PATCH 1/2] phy: cadence-torrent: Add single link USXGMII configuration for 156.25MHz refclk   Roger Quadros
  • [PATCH 2/2] phy: cadence-torrent: Use key:value pair table for all settings   Swapnil Jakhade
• [PATCH 0/7] dt-bindings: restrict node name suffixes   Krzysztof Kozlowski
  • [PATCH 1/7] dt-bindings: phy: intel,combo-phy: restrict node name suffixes   Krzysztof Kozlowski
    • [PATCH 1/7] dt-bindings: phy: intel,combo-phy: restrict node name suffixes   Tony Lindgren
  • [PATCH 2/7] dt-bindings: pwm: restrict node name suffixes   Krzysztof Kozlowski
    • [PATCH 2/7] dt-bindings: pwm: restrict node name suffixes   Tony Lindgren
  • [PATCH 3/7] dt-bindings: rtc: restrict node name suffixes   Krzysztof Kozlowski
    • [PATCH 3/7] dt-bindings: rtc: restrict node name suffixes   Tony Lindgren
  • [PATCH 4/7] dt-bindings: slimbus: restrict node name suffixes   Krzysztof Kozlowski
    • [PATCH 4/7] dt-bindings: slimbus: restrict node name suffixes   Tony Lindgren
  • [PATCH 5/7] spi: dt-bindings: restrict node name suffixes   Krzysztof Kozlowski
    • [PATCH 5/7] spi: dt-bindings: restrict node name suffixes   Tony Lindgren
  • [PATCH 6/7] dt-bindings: timestamp: restrict node name suffixes   Krzysztof Kozlowski
    • [PATCH 6/7] dt-bindings: timestamp: restrict node name suffixes   Tony Lindgren
  • [PATCH 7/7] dt-bindings: watchdog: restrict node name suffixes   Krzysztof Kozlowski
    • [PATCH 7/7] dt-bindings: watchdog: restrict node name suffixes   Guenter Roeck
    • [PATCH 7/7] dt-bindings: watchdog: restrict node name suffixes   Tony Lindgren
  • [PATCH 0/7] dt-bindings: restrict node name suffixes   Uwe Kleine-König
  • [PATCH 0/7] dt-bindings: restrict node name suffixes   Conor Dooley
    • [PATCH 0/7] dt-bindings: restrict node name suffixes   Krzysztof Kozlowski
  • (subset) [PATCH 0/7] dt-bindings: restrict node name suffixes   Mark Brown
• [PATCH v3 0/5] phy: qcom-qmp-usb: split away legacy USB+DP code   Dmitry Baryshkov
  • [PATCH v3 1/5] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: add sm8150 USB+DP PHY   Dmitry Baryshkov
  • [PATCH v3 2/5] phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform   Dmitry Baryshkov
    • [PATCH v3 2/5] phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform   Konrad Dybcio
      • [PATCH v3 2/5] phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform   Dmitry Baryshkov
      • [PATCH v3 2/5] phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform   Konrad Dybcio
  • [PATCH v3 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY   Dmitry Baryshkov
  • [PATCH v3 4/5] dt-bindings: phy: qcom,msm8996-qmp-usb3-phy: drop legacy bindings   Dmitry Baryshkov
  • [PATCH v3 5/5] phy: qcom-qmp-usb: split off the legacy USB+dp_com support   Dmitry Baryshkov
• [PATCH] phy: tegra: xusb: check return value of devm_kzalloc()   Claudiu Beznea

Last message date: Wed May 31 11:29:49 PDT 2023
Archived on: Wed May 31 11:30:01 PDT 2023

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...