[PATCH v2 09/11] arm64: dts: qcom: sm8250: switch UFS QMP PHY to new style of bindings

[Konrad Dybcio]

On 21.05.2023 22:38, Dmitry Baryshkov wrote:
> Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 20 ++++++--------------
>  1 file changed, 6 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index a260e4a7305b..4e94fb3bd0bc 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -2166,7 +2166,7 @@ ufs_mem_hc: ufshc at 1d84000 {
>  				     "jedec,ufs-2.0";
>  			reg = <0 0x01d84000 0 0x3000>;
>  			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> -			phys = <&ufs_mem_phy_lanes>;
> +			phys = <&ufs_mem_phy>;
>  			phy-names = "ufsphy";
>  			lanes-per-direction = <2>;
>  			#reset-cells = <1>;
> @@ -2210,10 +2210,8 @@ ufs_mem_hc: ufshc at 1d84000 {
>  
>  		ufs_mem_phy: phy at 1d87000 {
>  			compatible = "qcom,sm8250-qmp-ufs-phy";
> -			reg = <0 0x01d87000 0 0x1c0>;
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +			reg = <0 0x01d87000 0 0x1000>;
> +
>  			clock-names = "ref",
>  				      "ref_aux";
>  			clocks = <&rpmhcc RPMH_CXO_CLK>,
> @@ -2221,16 +2219,10 @@ ufs_mem_phy: phy at 1d87000 {
>  
>  			resets = <&ufs_mem_hc 0>;
>  			reset-names = "ufsphy";
> -			status = "disabled";
>  
> -			ufs_mem_phy_lanes: phy at 1d87400 {
> -				reg = <0 0x01d87400 0 0x16c>,
> -				      <0 0x01d87600 0 0x200>,
> -				      <0 0x01d87c00 0 0x200>,
> -				      <0 0x01d87800 0 0x16c>,
> -				      <0 0x01d87a00 0 0x200>;
> -				#phy-cells = <0>;
> -			};
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
>  		};
>  
>  		tcsr_mutex: hwlock at 1f40000 {