[PATCH v10 4/4] arm64: dts: qcom: qrb4210-rb2: Enable USB node

[Bhupesh Sharma]

Enable the USB controller and HS/SS PHYs on qrb4210-rb2 board.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index dc80f0bca767..eae3024ce003 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -222,6 +222,30 @@ &uart4 {
 	status = "okay";
 };
 
+&usb {
+	status = "okay";
+};
+
+&usb_dwc3 {
+	maximum-speed = "super-speed";
+	dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+	vdd-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l15a_3p128>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l4a_0p9>;
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+
+	status = "okay";
+};
+
 &xo_board {
 	clock-frequency = <19200000>;
 };
-- 
2.38.1