[PATCH v2 07/11] arm64: dts: qcom: sm6350: switch UFS QMP PHY to new style of bindings
Konrad Dybcio
konrad.dybcio at linaro.org
Mon May 22 10:00:58 PDT 2023
On 21.05.2023 22:38, Dmitry Baryshkov wrote:
> Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
Konrad
> arch/arm64/boot/dts/qcom/sm6350.dtsi | 18 ++++--------------
> 1 file changed, 4 insertions(+), 14 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> index 18c4616848ce..a816bb212174 100644
> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
> @@ -943,7 +943,7 @@ ufs_mem_hc: ufs at 1d84000 {
> <0 0x01d90000 0 0x8000>;
> reg-names = "std", "ice";
> interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> - phys = <&ufs_mem_phy_lanes>;
> + phys = <&ufs_mem_phy>;
> phy-names = "ufsphy";
> lanes-per-direction = <2>;
> #reset-cells = <1>;
> @@ -988,10 +988,7 @@ ufs_mem_hc: ufs at 1d84000 {
>
> ufs_mem_phy: phy at 1d87000 {
> compatible = "qcom,sm6350-qmp-ufs-phy";
> - reg = <0 0x01d87000 0 0x18c>;
> - #address-cells = <2>;
> - #size-cells = <2>;
> - ranges;
> + reg = <0 0x01d87000 0 0x1000>;
>
> clock-names = "ref",
> "ref_aux";
> @@ -1001,16 +998,9 @@ ufs_mem_phy: phy at 1d87000 {
> resets = <&ufs_mem_hc 0>;
> reset-names = "ufsphy";
>
> - status = "disabled";
> + #phy-cells = <0>;
>
> - ufs_mem_phy_lanes: phy at 1d87400 {
> - reg = <0 0x01d87400 0 0x128>,
> - <0 0x01d87600 0 0x1fc>,
> - <0 0x01d87c00 0 0x1dc>,
> - <0 0x01d87800 0 0x128>,
> - <0 0x01d87a00 0 0x1fc>;
> - #phy-cells = <0>;
> - };
> + status = "disabled";
> };
>
> ipa: ipa at 1e40000 {
More information about the linux-phy
mailing list