[PATCH v2 3/5] arm64: dts: qcom: sm8150: turn first USB PHY into USB+DP PHY

[Caleb Connolly]

On 21/05/2023 20:36, Dmitry Baryshkov wrote:
> The first USB PHY on the sm8150 platform is really the USB+DP combo
> PHY. Add the DP part of the PHY.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8150.dtsi | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 2273fa571988..1f442e1be63a 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -3399,20 +3399,19 @@ usb_2_hsphy: phy at 88e3000 {
>  		};
>  
>  		usb_1_qmpphy: phy at 88e9000 {
> -			compatible = "qcom,sm8150-qmp-usb3-phy";
> +			compatible = "qcom,sm8150-qmp-usb3-dp-phy";

Subnodes need to be renamed to usb3-phy and dp-phy respectively,
otherwise this fails to probe for me.

With that, for the series:

Tested-by: Caleb Connolly <caleb.connolly at linaro.org>
>  			reg = <0 0x088e9000 0 0x18c>,
> -			      <0 0x088e8000 0 0x10>;
> +			      <0 0x088e8000 0 0x38>,
> +			      <0 0x088ea000 0 0x40>;
>  			status = "disabled";
>  			#address-cells = <2>;
>  			#size-cells = <2>;
>  			ranges;
> -
>  			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
>  				 <&rpmhcc RPMH_CXO_CLK>,
>  				 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
>  				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
>  			clock-names = "aux", "ref_clk_src", "ref", "com_aux";
> -
>  			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
>  				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
>  			reset-names = "phy", "common";
> @@ -3430,6 +3429,16 @@ usb_1_ssphy: phy at 88e9200 {
>  				clock-names = "pipe0";
>  				clock-output-names = "usb3_phy_pipe_clk_src";
>  			};
> +
> +			usb_1_dpphy: phy at 88ea200 {
> +				reg = <0 0x088ea200 0 0x200>,
> +				      <0 0x088ea400 0 0x200>,
> +				      <0 0x088eaa00 0 0x200>,
> +				      <0 0x088ea600 0 0x200>,
> +				      <0 0x088ea800 0 0x200>;
> +				#clock-cells = <1>;
> +				#phy-cells = <0>;
> +			};
>  		};
>  
>  		usb_2_qmpphy: phy at 88eb000 {

-- 
// Caleb (they/them)