[PATCH v3 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings

[Dmitry Baryshkov]

Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 2273fa571988..628f3cead829 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -2018,7 +2018,7 @@ ufs_mem_hc: ufshc at 1d84000 {
 			      <0 0x01d90000 0 0x8000>;
 			reg-names = "std", "ice";
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -2063,10 +2063,8 @@ ufs_mem_hc: ufshc at 1d84000 {
 
 		ufs_mem_phy: phy at 1d87000 {
 			compatible = "qcom,sm8150-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c0>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
@@ -2076,16 +2074,10 @@ ufs_mem_phy: phy at 1d87000 {
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy at 1d87400 {
-				reg = <0 0x01d87400 0 0x16c>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x16c>,
-				      <0 0x01d87a00 0 0x200>;
-				#phy-cells = <0>;
-			};
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock at 1f40000 {
-- 
2.39.2