[PATCH v3 01/10] dt-bindings: phy: migrate combo QMP PHY bindings to qcom,sc8280xp-qmp-usb43dp-phy.yaml
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sun May 21 13:23:12 PDT 2023
Migrate legacy bindings (described in qcom,sc7180-qmp-usb3-dp-phy.yaml)
to qcom,sc8280xp-qmp-usb43dp-phy.yaml. This removes a need to declare
the child PHY node or split resource regions.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
.../phy/qcom,sc7180-qmp-usb3-dp-phy.yaml | 278 ------------------
.../phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 46 ++-
2 files changed, 44 insertions(+), 280 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
deleted file mode 100644
index a2ddf718ba76..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ /dev/null
@@ -1,278 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm QMP USB3 DP PHY controller (SC7180)
-
-description:
- The QMP PHY controller supports physical layer functionality for a number of
- controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
-
- Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
- qcom,sc8280xp-qmp-usb43dp-phy.yaml.
-
-maintainers:
- - Wesley Cheng <quic_wcheng at quicinc.com>
-
-properties:
- compatible:
- oneOf:
- - enum:
- - qcom,sc7180-qmp-usb3-dp-phy
- - qcom,sc8180x-qmp-usb3-dp-phy
- - qcom,sdm845-qmp-usb3-dp-phy
- - qcom,sm8150-qmp-usb3-dp-phy
- - qcom,sm8250-qmp-usb3-dp-phy
- - items:
- - enum:
- - qcom,sc7280-qmp-usb3-dp-phy
- - const: qcom,sm8250-qmp-usb3-dp-phy
-
- reg:
- items:
- - description: Address and length of PHY's USB serdes block.
- - description: Address and length of the DP_COM control block.
- - description: Address and length of PHY's DP serdes block.
-
- reg-names:
- items:
- - const: usb
- - const: dp_com
- - const: dp
-
- "#address-cells":
- enum: [ 1, 2 ]
-
- "#size-cells":
- enum: [ 1, 2 ]
-
- ranges: true
-
- clocks:
- minItems: 3
- maxItems: 4
-
- clock-names:
- minItems: 3
- maxItems: 4
-
- power-domains:
- maxItems: 1
-
- resets:
- items:
- - description: reset of phy block.
- - description: phy common block reset.
-
- reset-names:
- items:
- - const: phy
- - const: common
-
- vdda-phy-supply:
- description:
- Phandle to a regulator supply to PHY core block.
-
- vdda-pll-supply:
- description:
- Phandle to 1.8V regulator supply to PHY refclk pll block.
-
- vddp-ref-clk-supply:
- description:
- Phandle to a regulator supply to any specific refclk pll block.
-
-# Required nodes:
-patternProperties:
- "^usb3-phy@[0-9a-f]+$":
- type: object
- additionalProperties: false
- description:
- The USB3 PHY.
-
- properties:
- reg:
- items:
- - description: Address and length of TX.
- - description: Address and length of RX.
- - description: Address and length of PCS.
- - description: Address and length of TX2.
- - description: Address and length of RX2.
- - description: Address and length of pcs_misc.
-
- clocks:
- items:
- - description: pipe clock
-
- clock-names:
- deprecated: true
- items:
- - const: pipe0
-
- clock-output-names:
- items:
- - const: usb3_phy_pipe_clk_src
-
- '#clock-cells':
- const: 0
-
- '#phy-cells':
- const: 0
-
- required:
- - reg
- - clocks
- - '#clock-cells'
- - '#phy-cells'
-
- "^dp-phy@[0-9a-f]+$":
- type: object
- additionalProperties: false
- description:
- The DP PHY.
-
- properties:
- reg:
- items:
- - description: Address and length of TX.
- - description: Address and length of RX.
- - description: Address and length of PCS.
- - description: Address and length of TX2.
- - description: Address and length of RX2.
-
- '#clock-cells':
- const: 1
-
- '#phy-cells':
- const: 0
-
- required:
- - reg
- - '#clock-cells'
- - '#phy-cells'
-
-required:
- - compatible
- - reg
- - "#address-cells"
- - "#size-cells"
- - ranges
- - clocks
- - clock-names
- - resets
- - reset-names
- - vdda-phy-supply
- - vdda-pll-supply
-
-allOf:
- - if:
- properties:
- compatible:
- enum:
- - qcom,sc7180-qmp-usb3-dp-phy
- - qcom,sdm845-qmp-usb3-dp-phy
- then:
- properties:
- clocks:
- items:
- - description: Phy aux clock
- - description: Phy config clock
- - description: 19.2 MHz ref clk
- - description: Phy common block aux clock
- clock-names:
- items:
- - const: aux
- - const: cfg_ahb
- - const: ref
- - const: com_aux
-
- - if:
- properties:
- compatible:
- enum:
- - qcom,sc8180x-qmp-usb3-dp-phy
- - qcom,sm8150-qmp-usb3-dp-phy
- then:
- properties:
- clocks:
- items:
- - description: Phy aux clock
- - description: 19.2 MHz ref clk
- - description: Phy common block aux clock
- clock-names:
- items:
- - const: aux
- - const: ref
- - const: com_aux
-
- - if:
- properties:
- compatible:
- enum:
- - qcom,sm8250-qmp-usb3-dp-phy
- then:
- properties:
- clocks:
- items:
- - description: Phy aux clock
- - description: Board XO source
- - description: Phy common block aux clock
- clock-names:
- items:
- - const: aux
- - const: ref_clk_src
- - const: com_aux
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/clock/qcom,gcc-sdm845.h>
- usb_1_qmpphy: phy-wrapper at 88e9000 {
- compatible = "qcom,sdm845-qmp-usb3-dp-phy";
- reg = <0x088e9000 0x18c>,
- <0x088e8000 0x10>,
- <0x088ea000 0x40>;
- reg-names = "usb", "dp_com", "dp";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x088e9000 0x2000>;
-
- clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
- <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
- clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
- resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
- <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
- reset-names = "phy", "common";
-
- vdda-phy-supply = <&vdda_usb2_ss_1p2>;
- vdda-pll-supply = <&vdda_usb2_ss_core>;
-
- usb3-phy at 200 {
- reg = <0x200 0x128>,
- <0x400 0x200>,
- <0xc00 0x218>,
- <0x600 0x128>,
- <0x800 0x200>,
- <0xa00 0x100>;
- #clock-cells = <0>;
- #phy-cells = <0>;
- clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
- clock-output-names = "usb3_phy_pipe_clk_src";
- };
-
- dp-phy at 88ea200 {
- reg = <0xa200 0x200>,
- <0xa400 0x200>,
- <0xaa00 0x200>,
- <0xa600 0x200>,
- <0xa800 0x200>;
- #clock-cells = <1>;
- #phy-cells = <0>;
- };
- };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index ef1c02d8ac88..9af203dc8793 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -16,8 +16,14 @@ description:
properties:
compatible:
enum:
+ - qcom,sc7180-qmp-usb3-dp-phy
+ - qcom,sc7280-qmp-usb3-dp-phy
+ - qcom,sc8180x-qmp-usb3-dp-phy
- qcom,sc8280xp-qmp-usb43dp-phy
+ - qcom,sdm845-qmp-usb3-dp-phy
- qcom,sm6350-qmp-usb3-dp-phy
+ - qcom,sm8150-qmp-usb3-dp-phy
+ - qcom,sm8250-qmp-usb3-dp-phy
- qcom,sm8350-qmp-usb3-dp-phy
- qcom,sm8450-qmp-usb3-dp-phy
- qcom,sm8550-qmp-usb3-dp-phy
@@ -26,14 +32,17 @@ properties:
maxItems: 1
clocks:
- maxItems: 4
+ minItems: 4
+ maxItems: 5
clock-names:
+ minItems: 4
items:
- const: aux
- const: ref
- const: com_aux
- const: usb3_pipe
+ - const: cfg_ahb
power-domains:
maxItems: 1
@@ -85,7 +94,6 @@ required:
- reg
- clocks
- clock-names
- - power-domains
- resets
- reset-names
- vdda-phy-supply
@@ -93,6 +101,40 @@ required:
- "#clock-cells"
- "#phy-cells"
+allOf:
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc7180-qmp-usb3-dp-phy
+ - qcom,sdm845-qmp-usb3-dp-phy
+ then:
+ properties:
+ clocks:
+ maxItems: 5
+ clock-names:
+ maxItems: 5
+ else:
+ properties:
+ clocks:
+ maxItems: 4
+ clock-names:
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - qcom,sc8280xp-qmp-usb43dp-phy
+ - qcom,sm6350-qmp-usb3-dp-phy
+ - qcom,sm8550-qmp-usb3-dp-phy
+ then:
+ required:
+ - power-domains
+ else:
+ properties:
+ power-domains: false
+
additionalProperties: false
examples:
--
2.39.2
More information about the linux-phy
mailing list