[PATCH v3 2/5] phy: qcom-qmp-combo: add support for the USB+DP PHY on SM8150 platform

[Dmitry Baryshkov]

On Wed, 31 May 2023 at 14:35, Konrad Dybcio <konrad.dybcio at linaro.org> wrote:
> On 31.05.2023 04:34, Dmitry Baryshkov wrote:
> > SM8150 and SC8180X are close relatives. Reuse sc8180x data to support
> > USB+DP combo PHY on SM8150 platform.
> >
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> > ---
> I'm not sure this is right. Downstream reuses SA8195 USB seq.

The upstream driver uses sm8150 data for sc8180x. So even if sc8180x
data is not correct for sc8180x, it is definitely the one that we
should use for sm8150:

static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
        .serdes_tbl             = sm8150_usb3_serdes_tbl,
        .serdes_tbl_num         = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
        .tx_tbl                 = sm8150_usb3_tx_tbl,
        .tx_tbl_num             = ARRAY_SIZE(sm8150_usb3_tx_tbl),
        .rx_tbl                 = sm8150_usb3_rx_tbl,
        .rx_tbl_num             = ARRAY_SIZE(sm8150_usb3_rx_tbl),
        .pcs_tbl                = sm8150_usb3_pcs_tbl,
        .pcs_tbl_num            = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
        .pcs_usb_tbl            = sm8150_usb3_pcs_usb_tbl,
        .pcs_usb_tbl_num        = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),

        .dp_serdes_tbl          = qmp_v4_dp_serdes_tbl,
        .dp_serdes_tbl_num      = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
        .dp_tx_tbl              = qmp_v4_dp_tx_tbl,
        .dp_tx_tbl_num          = ARRAY_SIZE(qmp_v4_dp_tx_tbl),



>
> Konrad
> >  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > index 33cc99d9c77d..2bff1bbb8610 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > @@ -3614,6 +3614,10 @@ static const struct of_device_id qmp_combo_of_match_table[] = {
> >               .compatible = "qcom,sm6350-qmp-usb3-dp-phy",
> >               .data = &sm6350_usb3dpphy_cfg,
> >       },
> > +     {
> > +             .compatible = "qcom,sm8150-qmp-usb3-dp-phy",
> > +             .data = &sc8180x_usb3dpphy_cfg,
> > +     },
> >       {
> >               .compatible = "qcom,sm8250-qmp-usb3-dp-phy",
> >               .data = &sm8250_usb3dpphy_cfg,



-- 
With best wishes
Dmitry