[PATCH v2 06/11] arm64: dts: qcom: sm6115: switch UFS QMP PHY to new style of bindings

[Konrad Dybcio]

On 21.05.2023 22:38, Dmitry Baryshkov wrote:
> Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm6115.dtsi | 17 +++++------------
>  1 file changed, 5 insertions(+), 12 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index 631ca327e064..289b96d31414 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -784,7 +784,7 @@ ufs_mem_hc: ufs at 4804000 {
>  			reg = <0x0 0x04804000 0x0 0x3000>, <0x0 0x04810000 0x0 0x8000>;
>  			reg-names = "std", "ice";
>  			interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> -			phys = <&ufs_mem_phy_lanes>;
> +			phys = <&ufs_mem_phy>;
>  			phy-names = "ufsphy";
>  			lanes-per-direction = <1>;
>  			#reset-cells = <1>;
> @@ -825,24 +825,17 @@ ufs_mem_hc: ufs at 4804000 {
>  
>  		ufs_mem_phy: phy at 4807000 {
>  			compatible = "qcom,sm6115-qmp-ufs-phy";
> -			reg = <0x0 0x04807000 0x0 0x1c4>;
> -			#address-cells = <2>;
> -			#size-cells = <2>;
> -			ranges;
> +			reg = <0x0 0x04807000 0x0 0x1000>;
>  
>  			clocks = <&gcc GCC_UFS_CLKREF_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
>  			clock-names = "ref", "ref_aux";
>  
>  			resets = <&ufs_mem_hc 0>;
>  			reset-names = "ufsphy";
> -			status = "disabled";
>  
> -			ufs_mem_phy_lanes: phy at 4807400 {
> -				reg = <0x0 0x04807400 0x0 0x098>,
> -				      <0x0 0x04807600 0x0 0x130>,
> -				      <0x0 0x04807c00 0x0 0x16c>;
> -				#phy-cells = <0>;
> -			};
> +			#phy-cells = <0>;
> +
> +			status = "disabled";
>  		};
>  
>  		gpi_dma0: dma-controller at 4a00000 {