[PATCH v3 06/65] clk: at91: main: Add a determine_rate hook

[Claudiu.Beznea at microchip.com]

On 04.04.2023 13:10, Maxime Ripard wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> The SAM9x5 main clock implements a mux with a set_parent hook, but
> doesn't provide a determine_rate implementation.
> 
> This is a bit odd, since set_parent() is there to, as its name implies,
> change the parent of a clock. However, the most likely candidate to
> trigger that parent change is a call to clk_set_rate(), with
> determine_rate() figuring out which parent is the best suited for a
> given rate.
> 
> The other trigger would be a call to clk_set_parent(), but it's far less
> used, and it doesn't look like there's any obvious user for that clock.
> 
> So, the set_parent hook is effectively unused, possibly because of an
> oversight. However, it could also be an explicit decision by the
> original author to avoid any reparenting but through an explicit call to
> clk_set_parent().
> 
> The latter case would be equivalent to setting the flag
> CLK_SET_RATE_NO_REPARENT, together with setting our determine_rate hook
> to __clk_mux_determine_rate(). Indeed, if no determine_rate
> implementation is provided, clk_round_rate() (through
> clk_core_round_rate_nolock()) will call itself on the parent if
> CLK_SET_RATE_PARENT is set, and will not change the clock rate
> otherwise. __clk_mux_determine_rate() has the exact same behavior when
> CLK_SET_RATE_NO_REPARENT is set.
> 
> And if it was an oversight, then we are at least explicit about our
> behavior now and it can be further refined down the line.
> 
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>

Reviewed-by: Claudiu Beznea <claudiu.beznea at microchip.com>

Tested-by: Claudiu Beznea <claudiu.beznea at microchip.com>

> ---
>  drivers/clk/at91/clk-main.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/at91/clk-main.c b/drivers/clk/at91/clk-main.c
> index 8601b27c1ae0..e04e72394632 100644
> --- a/drivers/clk/at91/clk-main.c
> +++ b/drivers/clk/at91/clk-main.c
> @@ -533,6 +533,7 @@ static const struct clk_ops sam9x5_main_ops = {
>         .prepare = clk_sam9x5_main_prepare,
>         .is_prepared = clk_sam9x5_main_is_prepared,
>         .recalc_rate = clk_sam9x5_main_recalc_rate,
> +       .determine_rate = __clk_mux_determine_rate,
>         .set_parent = clk_sam9x5_main_set_parent,
>         .get_parent = clk_sam9x5_main_get_parent,
>         .save_context = clk_sam9x5_main_save_context,
> @@ -565,7 +566,7 @@ at91_clk_register_sam9x5_main(struct regmap *regmap,
>         init.ops = &sam9x5_main_ops;
>         init.parent_names = parent_names;
>         init.num_parents = num_parents;
> -       init.flags = CLK_SET_PARENT_GATE;
> +       init.flags = CLK_SET_PARENT_GATE | CLK_SET_RATE_NO_REPARENT;
> 
>         clkmain->hw.init = &init;
>         clkmain->regmap = regmap;
> 
> --
> 2.39.2
>