[PATCH v3 10/11] arm64: dts: qcom: sm8350: switch UFS QMP PHY to new style of bindings

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Tue May 23 07:06:21 PDT 2023


Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ebcb481571c2..6173521ff544 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -656,9 +656,9 @@ gcc: clock-controller at 100000 {
 				 <0>,
 				 <0>,
 				 <0>,
-				 <&ufs_mem_phy_lanes 0>,
-				 <&ufs_mem_phy_lanes 1>,
-				 <&ufs_mem_phy_lanes 2>,
+				 <&ufs_mem_phy 0>,
+				 <&ufs_mem_phy 1>,
+				 <&ufs_mem_phy 2>,
 				 <&usb_1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <0>;
 		};
@@ -1658,7 +1658,7 @@ ufs_mem_hc: ufshc at 1d84000 {
 				     "jedec,ufs-2.0";
 			reg = <0 0x01d84000 0 0x3000>;
 			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&ufs_mem_phy_lanes>;
+			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
 			#reset-cells = <1>;
@@ -1702,10 +1702,8 @@ ufs_mem_hc: ufshc at 1d84000 {
 
 		ufs_mem_phy: phy at 1d87000 {
 			compatible = "qcom,sm8350-qmp-ufs-phy";
-			reg = <0 0x01d87000 0 0x1c4>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			reg = <0 0x01d87000 0 0x1000>;
+
 			clock-names = "ref",
 				      "ref_aux";
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
@@ -1713,17 +1711,11 @@ ufs_mem_phy: phy at 1d87000 {
 
 			resets = <&ufs_mem_hc 0>;
 			reset-names = "ufsphy";
-			status = "disabled";
 
-			ufs_mem_phy_lanes: phy at 1d87400 {
-				reg = <0 0x01d87400 0 0x188>,
-				      <0 0x01d87600 0 0x200>,
-				      <0 0x01d87c00 0 0x200>,
-				      <0 0x01d87800 0 0x188>,
-				      <0 0x01d87a00 0 0x200>;
-				#clock-cells = <1>;
-				#phy-cells = <0>;
-			};
+			#clock-cells = <1>;
+			#phy-cells = <0>;
+
+			status = "disabled";
 		};
 
 		ipa: ipa at 1e40000 {
-- 
2.39.2




More information about the linux-phy mailing list