[PATCH v9 3/4] arm64: dts: qcom: sm6115: Add USB SS qmp phy node

[Bhupesh Sharma]

On Tue, 2 May 2023 at 05:48, Dmitry Baryshkov
<dmitry.baryshkov at linaro.org> wrote:
>
> On 01/05/2023 22:24, Bhupesh Sharma wrote:
> > Add USB superspeed qmp phy node to dtsi.
> >
> > Make sure that the various board dts files (which include sm4250.dtsi file)
> > continue to work as intended.
> >
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma at linaro.org>
> > ---
> >   .../boot/dts/qcom/sm4250-oneplus-billie2.dts  |  3 ++
> >   arch/arm64/boot/dts/qcom/sm6115.dtsi          | 29 +++++++++++++++++--
> >   .../boot/dts/qcom/sm6115p-lenovo-j606f.dts    |  3 ++
> >   3 files changed, 33 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > index a1f0622db5a0..75951fd439df 100644
> > --- a/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm4250-oneplus-billie2.dts
> > @@ -242,6 +242,9 @@ &usb {
> >   &usb_dwc3 {
> >       maximum-speed = "high-speed";
> >       dr_mode = "peripheral";
> > +
> > +     phys = <&usb_hsphy>;
> > +     phy-names = "usb2-phy";
> >   };
> >
> >   &usb_hsphy {
> > diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > index 631ca327e064..21d00b0295a1 100644
> > --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> > @@ -661,6 +661,31 @@ usb_hsphy: phy at 1613000 {
> >                       status = "disabled";
> >               };
> >
> > +             usb_qmpphy: phy at 1615000 {
> > +                     compatible = "qcom,sm6115-qmp-usb3-phy";
> > +                     reg = <0x0 0x01615000 0x0 0x200>;
>
> I replied with R-B, but then I noticed that the length of the region is
> bad. What is the maximum offset that is used by the driver? I know that
> it is bigger than 0x200.

Sure, let me recheck and fix this in the next version.

Thanks,
Bhupesh