[PATCH v2 04/11] arm64: dts: qcom: msm8998: switch UFS QMP PHY to new style of bindings

[Konrad Dybcio]

On 21.05.2023 22:38, Dmitry Baryshkov wrote:
> Change the UFS QMP PHY to use newer style of QMP PHY bindings (single
> resource region, no per-PHY subnodes).
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/msm8998.dtsi | 16 +++-------------
>  1 file changed, 3 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> index b150437a8355..848fbd2cb3f8 100644
> --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> @@ -980,7 +980,7 @@ ufshc: ufshc at 1da4000 {
>  			compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
>  			reg = <0x01da4000 0x2500>;
>  			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
> -			phys = <&ufsphy_lanes>;
> +			phys = <&ufsphy>;
>  			phy-names = "ufsphy";
>  			lanes-per-direction = <2>;
>  			power-domains = <&gcc UFS_GDSC>;
> @@ -1021,11 +1021,8 @@ ufshc: ufshc at 1da4000 {
>  
>  		ufsphy: phy at 1da7000 {
>  			compatible = "qcom,msm8998-qmp-ufs-phy";
> -			reg = <0x01da7000 0x18c>;
> -			#address-cells = <1>;
> -			#size-cells = <1>;
> +			reg = <0x01da7000 0x1000>;
>  			status = "disabled";
> -			ranges;
>  
>  			clock-names =
>  				"ref",
> @@ -1037,14 +1034,7 @@ ufsphy: phy at 1da7000 {
>  			reset-names = "ufsphy";
>  			resets = <&ufshc 0>;
>  
> -			ufsphy_lanes: phy at 1da7400 {
> -				reg = <0x01da7400 0x128>,
> -				      <0x01da7600 0x1fc>,
> -				      <0x01da7c00 0x1dc>,
> -				      <0x01da7800 0x128>,
> -				      <0x01da7a00 0x1fc>;
> -				#phy-cells = <0>;
> -			};
> +			#phy-cells = <0>;
Looks like that will make status not-last?

Konrad
>  		};
>  
>  		tcsr_mutex: hwlock at 1f40000 {