[PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock
Adrien Thierry
athierry at redhat.com
Tue May 30 11:46:05 PDT 2023
Hi Bjorn, thanks for your reply!
On Mon, May 29, 2023 at 02:16:29PM -0700, Bjorn Andersson wrote:
> On Mon, May 29, 2023 at 02:56:36PM -0400, Adrien Thierry wrote:
> > The driver is not enabling the ref clock, which thus gets disabled by
> > the clk_disable_unused initcall. This leads to the dwc3 controller
> > failing to initialize if probed after clk_disable_unused is called, for
> > instance when the driver is built as a module.
> >
>
> Good catch!
>
> A side note though, clk_disable_unused() has no way to take kernel
> modules into consideration today, and it doesn't handle the case where
> clock drivers are built as modules appropriately.
> Work has started to address this, but as of todaybooting the system
> without clk_ignore_unused is not recommended...
>
For my understanding, do you have an example of a situation that would
fail with modules when not using clk_ignore_unused?
> > To fix this, add calls to clk_prepare_enable/clk_disable_unprepare at
> > the proper places.
> >
>
> If I parse the downstream kernel correctly the refclock should be
> turned off across runtime and system suspend as well.
>
Which downstream kernel are you using? I'm not seing a system suspend
callback in mine [1]. refclock should be turned off on runtime suspend in
my patch, in qcom_snps_hsphy_suspend, which is called by
qcom_snps_hsphy_runtime_suspend.
[1] https://git.codelinaro.org/clo/la/kernel/ark-5.14/-/blob/kernel.lnx.5.14.r2-rel/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> Regards,
> Bjorn
>
> > Signed-off-by: Adrien Thierry <athierry at redhat.com>
> > ---
> > drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 20 +++++++++++++++++--
> > 1 file changed, 18 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> > index 6c237f3cc66d..8abf482e81a8 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> > @@ -166,6 +166,7 @@ static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
> > }
> >
> > clk_disable_unprepare(hsphy->cfg_ahb_clk);
> > + clk_disable_unprepare(hsphy->ref_clk);
> > return 0;
> > }
> >
> > @@ -181,6 +182,12 @@ static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
> > return ret;
> > }
> >
> > + ret = clk_prepare_enable(hsphy->ref_clk);
> > + if (ret) {
> > + dev_err(&hsphy->phy->dev, "failed to enable ref clock\n");
> > + return ret;
> > + }
> > +
> > return 0;
> > }
> >
> > @@ -380,10 +387,16 @@ static int qcom_snps_hsphy_init(struct phy *phy)
> > goto poweroff_phy;
> > }
> >
> > + ret = clk_prepare_enable(hsphy->ref_clk);
> > + if (ret) {
> > + dev_err(&phy->dev, "failed to enable ref clock, %d\n", ret);
> > + goto disable_ahb_clk;
> > + }
> > +
> > ret = reset_control_assert(hsphy->phy_reset);
> > if (ret) {
> > dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
> > - goto disable_ahb_clk;
> > + goto disable_ref_clk;
> > }
> >
> > usleep_range(100, 150);
> > @@ -391,7 +404,7 @@ static int qcom_snps_hsphy_init(struct phy *phy)
> > ret = reset_control_deassert(hsphy->phy_reset);
> > if (ret) {
> > dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
> > - goto disable_ahb_clk;
> > + goto disable_ref_clk;
> > }
> >
> > qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
> > @@ -448,6 +461,8 @@ static int qcom_snps_hsphy_init(struct phy *phy)
> >
> > return 0;
> >
> > +disable_ref_clk:
> > + clk_disable_unprepare(hsphy->ref_clk);
> > disable_ahb_clk:
> > clk_disable_unprepare(hsphy->cfg_ahb_clk);
> > poweroff_phy:
> > @@ -462,6 +477,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
> >
> > reset_control_assert(hsphy->phy_reset);
> > clk_disable_unprepare(hsphy->cfg_ahb_clk);
> > + clk_disable_unprepare(hsphy->ref_clk);
> > regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
> > hsphy->phy_initialized = false;
> >
> > --
> > 2.40.1
> >
Best,
Adrien
More information about the linux-phy
mailing list