[PATCH RFC 1/2] phy: qcom-snps-femto-v2: properly enable ref clock

Bjorn Andersson andersson at kernel.org
Mon May 29 14:16:29 PDT 2023


On Mon, May 29, 2023 at 02:56:36PM -0400, Adrien Thierry wrote:
> The driver is not enabling the ref clock, which thus gets disabled by
> the clk_disable_unused initcall. This leads to the dwc3 controller
> failing to initialize if probed after clk_disable_unused is called, for
> instance when the driver is built as a module.
> 

Good catch!

A side note though, clk_disable_unused() has no way to take kernel
modules into consideration today, and it doesn't handle the case where
clock drivers are built as modules appropriately.
Work has started to address this, but as of todaybooting the system
without clk_ignore_unused is not recommended...

> To fix this, add calls to clk_prepare_enable/clk_disable_unprepare at
> the proper places.
> 

If I parse the downstream kernel correctly the refclock should be
turned off across runtime and system suspend as well.

Regards,
Bjorn

> Signed-off-by: Adrien Thierry <athierry at redhat.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 20 +++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> index 6c237f3cc66d..8abf482e81a8 100644
> --- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
> @@ -166,6 +166,7 @@ static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
>  	}
>  
>  	clk_disable_unprepare(hsphy->cfg_ahb_clk);
> +	clk_disable_unprepare(hsphy->ref_clk);
>  	return 0;
>  }
>  
> @@ -181,6 +182,12 @@ static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
>  		return ret;
>  	}
>  
> +	ret = clk_prepare_enable(hsphy->ref_clk);
> +	if (ret) {
> +		dev_err(&hsphy->phy->dev, "failed to enable ref clock\n");
> +		return ret;
> +	}
> +
>  	return 0;
>  }
>  
> @@ -380,10 +387,16 @@ static int qcom_snps_hsphy_init(struct phy *phy)
>  		goto poweroff_phy;
>  	}
>  
> +	ret = clk_prepare_enable(hsphy->ref_clk);
> +	if (ret) {
> +		dev_err(&phy->dev, "failed to enable ref clock, %d\n", ret);
> +		goto disable_ahb_clk;
> +	}
> +
>  	ret = reset_control_assert(hsphy->phy_reset);
>  	if (ret) {
>  		dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret);
> -		goto disable_ahb_clk;
> +		goto disable_ref_clk;
>  	}
>  
>  	usleep_range(100, 150);
> @@ -391,7 +404,7 @@ static int qcom_snps_hsphy_init(struct phy *phy)
>  	ret = reset_control_deassert(hsphy->phy_reset);
>  	if (ret) {
>  		dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret);
> -		goto disable_ahb_clk;
> +		goto disable_ref_clk;
>  	}
>  
>  	qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0,
> @@ -448,6 +461,8 @@ static int qcom_snps_hsphy_init(struct phy *phy)
>  
>  	return 0;
>  
> +disable_ref_clk:
> +	clk_disable_unprepare(hsphy->ref_clk);
>  disable_ahb_clk:
>  	clk_disable_unprepare(hsphy->cfg_ahb_clk);
>  poweroff_phy:
> @@ -462,6 +477,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
>  
>  	reset_control_assert(hsphy->phy_reset);
>  	clk_disable_unprepare(hsphy->cfg_ahb_clk);
> +	clk_disable_unprepare(hsphy->ref_clk);
>  	regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs);
>  	hsphy->phy_initialized = false;
>  
> -- 
> 2.40.1
> 



More information about the linux-phy mailing list