[PATCH v4 4/6] phy: cadence: salvo: add .set_mode API
Frank Li
Frank.Li at nxp.com
Tue May 16 08:43:27 PDT 2023
From: Peter Chen <peter.chen at nxp.com>
For NXP platform design, the PHY can't know VBUS well, it causes the FSM
in controller seeing the disconnection at L1 use case. With .set_mode API
introduced, the controller driver could force PHY seeing B Session VALID
when it is at the device mode (VBUS is there), and keep FSM working well.
Signed-off-by: Peter Chen <peter.chen at nxp.com>
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
drivers/phy/cadence/phy-cadence-salvo.c | 29 +++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index b9866dc146ce..41616f786321 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -92,6 +92,7 @@
/* USB2 PHY register definition */
#define UTMI_REG15 0xaf
#define UTMI_AFE_RX_REG5 0x12
+#define UTMI_AFE_BC_REG4 0x29
/* TB_ADDR_TX_RCVDETSC_CTRL */
#define RXDET_IN_P3_32KHZ BIT(0)
@@ -105,6 +106,9 @@
/* 0us, txvalid is ready just after HS/FS transmitters have powered up */
#define TXVALID_GATE_THRESHOLD_HS_0US (BIT(4) | BIT(5))
+#define SET_B_SESSION_VALID (BIT(6) | BIT(5))
+#define CLR_B_SESSION_VALID (BIT(6))
+
struct cdns_reg_pairs {
u16 val;
u32 off;
@@ -124,6 +128,13 @@ struct cdns_salvo_phy {
};
static const struct of_device_id cdns_salvo_phy_of_match[];
+static const struct cdns_salvo_data cdns_nxp_salvo_data;
+
+static bool cdns_is_nxp_phy(struct cdns_salvo_phy *salvo_phy)
+{
+ return salvo_phy->data == &cdns_nxp_salvo_data;
+}
+
static u16 cdns_salvo_read(struct cdns_salvo_phy *salvo_phy, u32 offset, u32 reg)
{
return (u16)readl(salvo_phy->base + offset +
@@ -273,11 +284,29 @@ static int cdns_salvo_phy_power_off(struct phy *phy)
return 0;
}
+static int cdns_salvo_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct cdns_salvo_phy *salvo_phy = phy_get_drvdata(phy);
+
+ if (!cdns_is_nxp_phy(salvo_phy))
+ return 0;
+
+ if (mode == PHY_MODE_INVALID)
+ cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_BC_REG4,
+ CLR_B_SESSION_VALID);
+ else if (mode == PHY_MODE_USB_DEVICE)
+ cdns_salvo_write(salvo_phy, USB2_PHY_OFFSET, UTMI_AFE_BC_REG4,
+ SET_B_SESSION_VALID);
+
+ return 0;
+}
+
static const struct phy_ops cdns_salvo_phy_ops = {
.init = cdns_salvo_phy_init,
.power_on = cdns_salvo_phy_power_on,
.power_off = cdns_salvo_phy_power_off,
.owner = THIS_MODULE,
+ .set_mode = cdns_salvo_set_mode,
};
static int cdns_salvo_phy_probe(struct platform_device *pdev)
--
2.34.1
More information about the linux-phy
mailing list