[PATCH v5 1/3] dt-bindings: phy: Add starfive,jh7110-dphy-rx

[Conor Dooley]

Hey Changhuang,

Couple of minor bits from me here, you don't need to fix them unless
the binding has to change for other reasons.


On Mon, May 29, 2023 at 05:15:01AM -0700, Changhuang Liang wrote:
> StarFive SoCs like the jh7110 use a MIPI D-PHY RX controller based on
> a M31 IP. Add a binding for it.
> 
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
>  .../bindings/phy/starfive,jh7110-dphy-rx.yaml | 71 +++++++++++++++++++
>  1 file changed, 71 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
> new file mode 100644
> index 000000000000..46fd370188e8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-rx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive SoC MIPI D-PHY Rx Controller

nit: either s/SoC/JH7110/ or s/SoC//.

> +
> +maintainers:
> +  - Jack Zhu <jack.zhu at starfivetech.com>
> +  - Changhuang Liang <changhuang.liang at starfivetech.com>
> +
> +description:
> +  The StarFive SoC uses the MIPI CSI D-PHY based on M31 IP to transfer
> +  CSI camera data.

nit: "Starfive SoCs contain a MIPI CSI D-PHY based on an M31 IP, used to
transfer CSI camera data."

> +properties:
> +  compatible:
> +    const: starfive,jh7110-dphy-rx
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: config clock
> +      - description: reference clock
> +      - description: escape mode transmit clock
> +
> +  clock-names:
> +    items:
> +      - const: cfg
> +      - const: ref
> +      - const: tx
> +
> +  resets:
> +    items:
> +      - description: DPHY_HW reset
> +      - description: DPHY_B09_ALWAYS_ON reset

I'd prefer not to have what looks like copy-paste from a datasheet
and instead a description of what they do.

Otherwise, this looks grand to me, but I don't understand the hardware
so there is no point in me leaving an R-b on this.
Hopefully Krzysztof can take a look at it in the coming days.

Thanks,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20230529/a97c089d/attachment-0001.sig>