[PATCH RFC 0/3] Support VBUSEN selection control for RZ/G2L

[Biju Das]

This patch series aims to add support for VBUSEN selection control for
RZ/G2L alike SoCs.

As per RZ/G2L HW(Rev.1.30 May2023) manual, VBUSEN can be controlled by
the Port Power bit of the EHCI/OHCI operational register or by the VBOUT
bit of the VBUS Control Register.

A reset consumer(phy-rcar-gen3-usb2) needs to find the reset controller
device and then call the provider(reset-rzg2l-usbphy-ctrl) to configure
it.

Please share your thoughts on this patch series.

Biju Das (3):
  reset: Add reset_controller_get_dev()
  reset: renesas: Add rzg2l_usbphy_ctrl_select_vbus_ctrl()
  phy: renesas: phy-rcar-gen3-usb2: Control VBUSEN selection

 drivers/phy/renesas/phy-rcar-gen3-usb2.c |  9 ++++++++
 drivers/reset/core.c                     | 14 ++++++++++++
 drivers/reset/reset-rzg2l-usbphy-ctrl.c  | 27 ++++++++++++++++++++++++
 include/linux/reset-controller.h         |  9 ++++++++
 include/linux/reset/rzg2l-usbphy-ctrl.h  | 16 ++++++++++++++
 5 files changed, 75 insertions(+)
 create mode 100644 include/linux/reset/rzg2l-usbphy-ctrl.h

-- 
2.25.1