[PATCH v3 3/8] phy: qcom-qmp-combo: Extend phy_mutex to all phy_ops
Bjorn Andersson
quic_bjorande at quicinc.com
Sun May 14 20:27:38 PDT 2023
The phy core ensures mutual exclusion across the ops for a given phy,
but the upcoming introduction of USB Type-C orientation switching might
race with the DisplayPort phy operations. So extend the mutual exclusion
to cover the remaining ops as well, to avoid concurrent reconfiguration
of the hardware.
Reported-by: Johan Hovold <johan at kernel.org>
Reviewed-by: Johan Hovold <johan+linaro at kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
---
Changes since v2:
- None
Changes since v1:
- New patch
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 8918ba2b18a4..6baacdf3a4cb 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2437,12 +2437,16 @@ static int qmp_combo_dp_configure(struct phy *phy, union phy_configure_opts *opt
struct qmp_combo *qmp = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qmp->cfg;
+ mutex_lock(&qmp->phy_mutex);
+
memcpy(&qmp->dp_opts, dp_opts, sizeof(*dp_opts));
if (qmp->dp_opts.set_voltages) {
cfg->configure_dp_tx(qmp);
qmp->dp_opts.set_voltages = 0;
}
+ mutex_unlock(&qmp->phy_mutex);
+
return 0;
}
@@ -2450,11 +2454,16 @@ static int qmp_combo_dp_calibrate(struct phy *phy)
{
struct qmp_combo *qmp = phy_get_drvdata(phy);
const struct qmp_phy_cfg *cfg = qmp->cfg;
+ int ret = 0;
+
+ mutex_lock(&qmp->phy_mutex);
if (cfg->calibrate_dp_phy)
- return cfg->calibrate_dp_phy(qmp);
+ ret = cfg->calibrate_dp_phy(qmp);
- return 0;
+ mutex_unlock(&qmp->phy_mutex);
+
+ return ret;
}
static int qmp_combo_com_init(struct qmp_combo *qmp)
@@ -2578,6 +2587,8 @@ static int qmp_combo_dp_power_on(struct phy *phy)
void __iomem *tx = qmp->dp_tx;
void __iomem *tx2 = qmp->dp_tx2;
+ mutex_lock(&qmp->phy_mutex);
+
qmp_combo_dp_serdes_init(qmp);
qmp_combo_configure_lane(tx, cfg->dp_tx_tbl, cfg->dp_tx_tbl_num, 1);
@@ -2589,6 +2600,8 @@ static int qmp_combo_dp_power_on(struct phy *phy)
/* Configure link rate, swing, etc. */
cfg->configure_dp_phy(qmp);
+ mutex_unlock(&qmp->phy_mutex);
+
return 0;
}
@@ -2596,9 +2609,13 @@ static int qmp_combo_dp_power_off(struct phy *phy)
{
struct qmp_combo *qmp = phy_get_drvdata(phy);
+ mutex_lock(&qmp->phy_mutex);
+
/* Assert DP PHY power down */
writel(DP_PHY_PD_CTL_PSR_PWRDN, qmp->dp_dp_phy + QSERDES_DP_PHY_PD_CTL);
+ mutex_unlock(&qmp->phy_mutex);
+
return 0;
}
--
2.25.1
More information about the linux-phy
mailing list