August 2024 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Aug 1 00:00:26 PDT 2024
Ending: Sat Aug 31 07:20:39 PDT 2024
Messages: 418

• [PATCH v3] phy: qcom: qmp: Add debug prints for register writes   Manivannan Sadhasivam
  • [PATCH v3] phy: qcom: qmp: Add debug prints for register writes   Vinod Koul
    • [PATCH v3] phy: qcom: qmp: Add debug prints for register writes   Manivannan Sadhasivam
• [PATCH] phy: fsl-imx8mq-usb: fix tuning parameter name   Alexander Stein
  • [PATCH] phy: fsl-imx8mq-usb: fix tuning parameter name   Xu Yang
• [PATCH v3 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY   Markus Elfring
  • [PATCH v3 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY   Krzysztof Kozlowski
    • [PATCH v3 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY   Hui-Ping Chen
  • [PATCH v3 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY   Hui-Ping Chen
• [PATCH] phy: qcom-qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation   Abel Vesa
• [PATCH v2] phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation   Abel Vesa
  • [PATCH v2] phy: qcom: qmp-pcie: Fix X1E80100 PCIe Gen4 PHY initialisation   Vinod Koul
• [PATCH v2] phy: fsl-imx8mq-usb: fix tuning parameter name   Xu Yang
  • [PATCH v2] phy: fsl-imx8mq-usb: fix tuning parameter name   Alexander Stein
    • [PATCH v2] phy: fsl-imx8mq-usb: fix tuning parameter name   Xu Yang
• [PATCH v3] phy: fsl-imx8mq-usb: fix tuning parameter name   Xu Yang
  • [PATCH v3] phy: fsl-imx8mq-usb: fix tuning parameter name   Alexander Stein
  • [PATCH v3] phy: fsl-imx8mq-usb: fix tuning parameter name   Vinod Koul
• [PATCH v3 1/2] dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings   Krzysztof Kozlowski
• [PATCH v2 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY   Krzysztof Kozlowski
• [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Conor Dooley
  • [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
    • [PATCH 1/2] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Conor Dooley
      • [PATCH v2 0/1] phy: Add support for Microchip ATA6561 CAN Transceiver   Ilya Orazov
      • [PATCH v2 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
      • [PATCH v2 0/1] phy: Add support for Microchip ATA6561 CAN Transceiver   Ilya Orazov
      • [PATCH v2 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
      • [PATCH v2 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Rob Herring (Arm)
      • [PATCH v2 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Conor Dooley
      • [PATCH v2 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Krzysztof Kozlowski
      • [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
      • [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Conor Dooley
      • [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
      • [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Krzysztof Kozlowski
      • [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
• [PATCH v2] phy: qcom: qmp-pcie: Configure all tables on port B PHY   Abel Vesa
  • [PATCH v2] phy: qcom: qmp-pcie: Configure all tables on port B PHY   Dmitry Baryshkov
  • [PATCH v2] phy: qcom: qmp-pcie: Configure all tables on port B PHY   Vinod Koul
  • [PATCH v2] phy: qcom: qmp-pcie: Configure all tables on port B PHY   Vinod Koul
• [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
  • [PATCH 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95   Xu Yang
    • [PATCH 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95   Krzysztof Kozlowski
  • [PATCH 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Xu Yang
    • [PATCH 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Dmitry Baryshkov
      • [PATCH 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Xu Yang
  • [PATCH 4/5] arm64: dts: imx95: add usb3 related nodes   Xu Yang
  • [PATCH 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node   Xu Yang
  • [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Krzysztof Kozlowski
    • [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
    • [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
      • [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Krzysztof Kozlowski
      • [PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
• [PATCH 3/3] phy: starfive: jh7110-usb: Fix link configuration to controller   Minda Chen
  • [PATCH 3/3] phy: starfive: jh7110-usb: Fix link configuration to controller   Dan Carpenter
• [PATCH] phy: qcom: com-qmp-combo: fix swing and pre-emphasis table for sm8350   Vinod Koul
• [PATCH v3] phy: cadence-torrent: add support for three or more links using 2 protocols   Vinod Koul
  • [PATCH v3] phy: cadence-torrent: add support for three or more links using 2 protocols   Siddharth Vadapalli
  • [PATCH v3] phy: cadence-torrent: add support for three or more links using 2 protocols   Vinod Koul
• [PATCH] phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume   Vinod Koul
• [PATCH] phy: airoha: adjust initialization delay in airoha_pcie_phy_init()   Vinod Koul
  • [PATCH] phy: airoha: adjust initialization delay in airoha_pcie_phy_init()   Lorenzo Bianconi
• [PATCH] phy: mvebu-cp110-utmi: support swapping d+/d- lanes by dts property   Vinod Koul
• [PATCH v1] phy: marvell: phy-mvebu-cp110-comphy: improve eth_port1 on comphy4   Vinod Koul
• [PATCH] phy: ti: phy-j721e-wiz: convert comma to semicolon   Vinod Koul
• [PATCH] dt-bindings: phy: hisilicon,hi3798cv200-combphy: Convert to DT schema   Vinod Koul
• [PATCH] phy: exynos5-usbdrd: fix error code in probe()   Vinod Koul
• [PATCH 00/13] Add USB support to Exynos7885   David Virag
  • [PATCH 01/13] dt-bindings: clock: exynos7885: Fix duplicated binding   David Virag
  • [PATCH 02/13] dt-bindings: clock: exynos7885: Add CMU_TOP PLL MUX indices   David Virag
  • [PATCH 03/13] dt-bindings: clock: exynos7885: Add indices for USB clocks   David Virag
  • [PATCH 04/13] dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos7885 support   David Virag
    • [PATCH 04/13] dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos7885 support   Krzysztof Kozlowski
  • [PATCH 05/13] dt-bindings: usb: samsung,exynos-dwc3: Add Exynos7885 support   David Virag
    • [PATCH 05/13] dt-bindings: usb: samsung,exynos-dwc3: Add Exynos7885 support   Krzysztof Kozlowski
  • [PATCH 06/13] clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix   David Virag
    • [PATCH 06/13] clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix   Krzysztof Kozlowski
      • [PATCH 06/13] clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix   David Virag
      • [PATCH 06/13] clk: samsung: exynos7885: Update CLKS_NR_FSYS after bindings fix   Krzysztof Kozlowski
  • [PATCH 07/13] clk: samsung: exynos7885: Add missing MUX clocks from PLLs in CMU_TOP   David Virag
  • [PATCH 08/13] clk: samsung: clk-pll: Add support for pll_1418x   David Virag
  • [PATCH 09/13] clk: samsung: exynos7885: Add USB related clocks to CMU_FSYS   David Virag
    • [PATCH 09/13] clk: samsung: exynos7885: Add USB related clocks to CMU_FSYS   Krzysztof Kozlowski
  • [PATCH 10/13] usb: dwc3: exynos: Add support for Exynos7885   David Virag
  • [PATCH 11/13] phy: exynos5-usbdrd: support Exynos7885 USB PHY   David Virag
    • [PATCH 11/13] phy: exynos5-usbdrd: support Exynos7885 USB PHY   Krzysztof Kozlowski
  • [PATCH 12/13] arm64: dts: exynos: Enable USB in Exynos7885   David Virag
    • [PATCH 12/13] arm64: dts: exynos: Enable USB in Exynos7885   Krzysztof Kozlowski
  • [PATCH 13/13] arm64: dts: exynos: exynos7885-jackpotlte: Enable USB support   David Virag
  • [PATCH 00/13] Add USB support to Exynos7885   Krzysztof Kozlowski
• [PATCH v4 0/2] Add support for nuvoton ma35 usb2 phy   Hui-Ping Chen
  • [PATCH v4 1/2] dt-bindings: phy: nuvoton,ma35-usb2-phy: add new bindings   Hui-Ping Chen
  • [PATCH v4 2/2] phy: nuvoton: add new driver for the Nuvoton MA35 SoC USB 2.0 PHY   Hui-Ping Chen
  • [PATCH v4 0/2] Add support for nuvoton ma35 usb2 phy   Vinod Koul
• [PATCH v2 06/16] drm/imx: Add i.MX8qxp Display Controller display engine   Liu Ying
• [PATCH v2 09/16] drm/imx: Add i.MX8qxp Display Controller KMS   Liu Ying
• [PATCH v2] phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume   Radhey Shyam Pandey
  • [PATCH v2] phy: xilinx: phy-zynqmp: Fix SGMII linkup failure on resume   Vinod Koul
• [PATCH v4] phy: cadence-torrent: add support for three or more links using 2 protocols   Siddharth Vadapalli
  • [PATCH v4] phy: cadence-torrent: add support for three or more links using 2 protocols   Vinod Koul
• [PATCH v2 0/4] Add clock provider support to Rockchip RK3588 HDMI TX PHY   Vinod Koul
• [PATCH v3] phy: qcom: qmp-pcie: Configure all tables on port B PHY   Abel Vesa
  • [PATCH v3] phy: qcom: qmp-pcie: Configure all tables on port B PHY   Vinod Koul
• [PATCH v2] phy: airoha: adjust initialization delay in airoha_pcie_phy_init()   Lorenzo Bianconi
  • [PATCH v2] phy: airoha: adjust initialization delay in airoha_pcie_phy_init()   AngeloGioacchino Del Regno
    • [PATCH v2] phy: airoha: adjust initialization delay in airoha_pcie_phy_init()   Lorenzo Bianconi
• [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
  • [PATCH v2 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95   Xu Yang
  • [PATCH v2 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Xu Yang
  • [PATCH v2 4/5] arm64: dts: imx95: add usb3 related nodes   Xu Yang
  • [PATCH v2 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node   Xu Yang
  • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Krzysztof Kozlowski
    • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Frank Li
      • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
      • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Krzysztof Kozlowski
      • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
      • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Krzysztof Kozlowski
      • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
      • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Krzysztof Kozlowski
  • [PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Krzysztof Kozlowski
• [PATCH v3] phy: airoha: adjust initialization delay in airoha_pcie_phy_init()   Lorenzo Bianconi
  • [PATCH v3] phy: airoha: adjust initialization delay in airoha_pcie_phy_init()   Vinod Koul
• [PATCH 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Rob Herring (Arm)
• [PATCH v2 1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty   Peter Chen
• [PATCH v2 5/6] usb: phy: mxs: enable weak 1p1 regulator for imx6ul during suspend   Peter Chen
• [PATCH v2 4/6] usb: phy: mxs: add wakeup enable for imx7ulp   Peter Chen
• [PATCH v2 2/6] usb: phy: mxs: keep USBPHY2's clk always on   Peter Chen
• [PATCH 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
  • [PATCH 1/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
  • [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
    • [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Rob Herring (Arm)
      • [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Rob Herring
    • [PATCH 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Rob Herring
  • [PATCH 3/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
    • [PATCH 3/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   kernel test robot
    • [PATCH 3/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   kernel test robot
  • [PATCH 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
  • [PATCH 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
• [PATCH v7 0/6] HDMI TX support in msm8998   Marc Gonzalez
• [PATCH v2 0/3] riscv: jh7110: Fix configuration for on-chip USB 2.0 support   Jan Kiszka
  • [PATCH v2 2/3] riscv: dts: starfive: jh7110: Add sys-syscon property to usbphy0   Jan Kiszka
• [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Jan Kiszka
  • [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Conor Dooley
    • [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Jan Kiszka
      • [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Conor Dooley
      • 回复: [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Minda Chen
      • 回复: [PATCH v2 1/3] dt-bindings: phy: jh7110-usb-phy: Add sys-syscon property   Conor Dooley
• [PATCH v2 3/3] phy: starfive: jh7110-usb: Fix link configuration to controller   Jan Kiszka
• [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Dragan Simic
  • [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Heiko Stübner
    • [PATCH] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Dragan Simic
• [PATCH] phy: qualcomm: Check NULL ptr on data   Ma Ke
  • [PATCH] phy: qualcomm: Check NULL ptr on data   Greg KH
• drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Frieder Schrempf
  • drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Adam Ford
    • drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Dominique MARTINET
      • drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Adam Ford
      • drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Adam Ford
      • drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Adam Ford
      • drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Frieder Schrempf
      • drm/bridge/imx8mp-hdmi-tx: Allow inexact pixel clock frequencies (Was: [PATCH V8 10/12] drm/bridge: imx: add bridge wrapper driver for i.MX8MP DWC HDMI)   Dominique MARTINET
• [PATCH v2 0/7] arm64: qcom: allow up to 4 lanes for the Type-C DisplayPort Altmode   Luca Weiss
• [PATCH v2 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
  • [PATCH v2 1/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
    • [PATCH v2 1/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Krzysztof Kozlowski
  • [PATCH v2 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
    • [PATCH v2 2/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Rob Herring
  • [PATCH v2 3/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
  • [PATCH v2 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
  • [PATCH v2 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
• [PATCH v3 06/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller command sequencer   Rob Herring
  • [PATCH v3 06/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller command sequencer   Liu Ying
• [PATCH v3 05/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller AXI performance counter   Rob Herring
• [PATCH v3 04/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller pixel engine   Rob Herring
• [PATCH v3 03/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller display engine   Rob Herring
• [PATCH v3 01/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller processing units   Rob Herring
• [PATCH v3 02/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller blit engine   Rob Herring
• [PATCH v3 08/19] dt-bindings: display: imx: Add i.MX8qxp Display Controller   Rob Herring (Arm)
• [PATCH] dt-bindings: phy: socionext,uniphier: add top-level constraints   Krzysztof Kozlowski
  • [PATCH] dt-bindings: phy: socionext,uniphier: add top-level constraints   Rob Herring (Arm)
  • [PATCH] dt-bindings: phy: socionext,uniphier: add top-level constraints   Kunihiko Hayashi
  • [PATCH] dt-bindings: phy: socionext,uniphier: add top-level constraints   Vinod Koul
• [PATCH v2 0/3] Improve error handling in Rockchip Inno USB 2.0 PHY driver   Dragan Simic
  • [PATCH v2 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Dragan Simic
    • [PATCH v2 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Heiko Stübner
      • [PATCH v2 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Dragan Simic
    • [PATCH v2 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Christophe JAILLET
      • [PATCH v2 2/3] phy: phy-rockchip-inno-usb2: Handle failed extcon allocation better   Dragan Simic
  • [PATCH v2 3/3] phy: phy-rockchip-inno-usb2: Improve error handling while probing   Dragan Simic
    • [PATCH v2 3/3] phy: phy-rockchip-inno-usb2: Improve error handling while probing   Heiko Stübner
      • [PATCH v2 3/3] phy: phy-rockchip-inno-usb2: Improve error handling while probing   Dragan Simic
      • [PATCH v2 3/3] phy: phy-rockchip-inno-usb2: Improve error handling while probing   Heiko Stübner
      • [PATCH v2 3/3] phy: phy-rockchip-inno-usb2: Improve error handling while probing   Dragan Simic
• [PATCH v2 1/3] phy: phy-rockchip-inno-usb2: Perform trivial code cleanups   Dragan Simic
  • [PATCH v2 1/3] phy: phy-rockchip-inno-usb2: Perform trivial code cleanups   Heiko Stübner
    • [PATCH v2 1/3] phy: phy-rockchip-inno-usb2: Perform trivial code cleanups   Dragan Simic
• [PATCH v2 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100   Abel Vesa
  • [PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4   Abel Vesa
    • [PATCH v2 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4   Johan Hovold
  • [PATCH v2 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100   Abel Vesa
    • [PATCH v2 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100   Johan Hovold
• [PATCH] phy: qualcomm: Check NULL ptr on lvts_data in qcom_ipq806x_usb_phy_probe()   Ma Ke
  • [PATCH] phy: qualcomm: Check NULL ptr on lvts_data in qcom_ipq806x_usb_phy_probe()   Bjorn Andersson
    • [PATCH] phy: qualcomm: Check NULL ptr on lvts_data in qcom_ipq806x_usb_phy_probe()   Christian Marangi
• [PATCH v3 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip   Ilya Orazov
  • [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
    • [PATCH v3 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Krzysztof Kozlowski
  • [PATCH v3 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip   Krzysztof Kozlowski
    • [PATCH v3 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip   Ilya Orazov
      • [PATCH v3 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip   Krzysztof Kozlowski
• [PATCH 0/4] phy: convert to devm_clk_get_*()   Yangtao Li
• [PATCH 1/4] phy: ti: phy-dm816x-usb: Convert to devm_clk_get_prepared()   Yangtao Li
• [PATCH 2/4] phy: qualcomm: phy-qcom-apq8064-sata: Convert to devm_clk_get_enabled()   Yangtao Li
  • [PATCH 2/4] phy: qualcomm: phy-qcom-apq8064-sata: Convert to devm_clk_get_enabled()   Dmitry Baryshkov
  • [PATCH 2/4] phy: qualcomm: phy-qcom-apq8064-sata: Convert to devm_clk_get_enabled()   Vinod Koul
• [PATCH 3/4] phy: qualcomm: phy-qcom-ipq806x-sata: Convert to devm_clk_get_enabled()   Yangtao Li
  • [PATCH 3/4] phy: qualcomm: phy-qcom-ipq806x-sata: Convert to devm_clk_get_enabled()   Dmitry Baryshkov
• [PATCH 4/4] phy: samsung: exynos5250-sata: fix missing clock disable in remove path   Yangtao Li
• [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property   Xu Yang
  • [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property   Krzysztof Kozlowski
  • [PATCH v2 3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property   Xu Yang
• [PATCH v4 0/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip   Ilya Orazov
  • [PATCH v4 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
    • [PATCH v4 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Vinod Koul
      • [PATCH v4 1/1] dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561   Ilya Orazov
• [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Claudiu
  • [PATCH 01/16] clk: renesas: r9a08g045: Add clocks, resets and power domains for USB   Claudiu
    • [PATCH 01/16] clk: renesas: r9a08g045: Add clocks, resets and power domains for USB   Geert Uytterhoeven
  • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   Claudiu
    • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   Conor Dooley
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   Conor Dooley
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   claudiu beznea
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   claudiu beznea
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   Conor Dooley
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   claudiu beznea
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   Conor Dooley
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   claudiu beznea
      • [PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S   Conor Dooley
  • [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset   Claudiu
    • [PATCH 03/16] dt-bindings: reset: renesas,r9a08g045-sysc: Add reset IDs for RZ/G3S SYSC reset   Conor Dooley
  • [PATCH 04/16] soc: renesas: Add SYSC driver for Renesas RZ/G3S   Claudiu
  • [PATCH 05/16] soc: renesas: sysc: Move RZ/G3S SoC detection on SYSC driver   Claudiu
  • [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC   Claudiu
    • [PATCH 06/16] dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S SoC   Conor Dooley
  • [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array   Claudiu
    • [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array   Biju Das
      • [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array   claudiu beznea
      • [PATCH 07/16] reset: rzg2l-usbphy-ctrl: Get reset control array   Biju Das
  • [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S   Claudiu
    • [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S   Biju Das
      • [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S   claudiu beznea
      • [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S   Biju Das
  • [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC   Claudiu
    • [PATCH 09/16] dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC   Conor Dooley
  • [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus   Claudiu
    • [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus   Biju Das
      • [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus   claudiu beznea
      • [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus   Biju Das
      • [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus   Vinod Koul
      • [PATCH 10/16] phy: renesas: rcar-gen3-usb2: Add support to initialize the bus   Biju Das
  • [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings   Claudiu
    • [PATCH 11/16] dt-bindings: phy: renesas,usb2-phy: Document RZ/G3S phy bindings   Conor Dooley
  • [PATCH 12/16] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC   Claudiu
  • [PATCH 13/16] arm64: dts: renesas: Add #reset-cells to system controller node   Claudiu
  • [PATCH 14/16] arm64: dts: renesas: r9a08g045: Add USB support   Claudiu
  • [PATCH 15/16] arm64: dts: renesas: rzg3s-smarc: Enable USB support   Claudiu
  • [PATCH 16/16] arm64: defconfig: Enable RZ/G3S SYSC reset driver   Claudiu
  • [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Ulf Hansson
    • [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
      • [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Ulf Hansson
      • [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   claudiu beznea
      • [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Ulf Hansson
      • [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Biju Das
  • (subset) [PATCH 00/16] Add initial USB support for the Renesas RZ/G3S SoC   Vinod Koul
• [PATCH v3 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100   Abel Vesa
  • [PATCH v3 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100   Abel Vesa
    • [PATCH v3 2/2] phy: qcom: qmp-pcie: Add Gen4 4-lanes mode for X1E80100   Johan Hovold
  • [PATCH v3 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100   Vinod Koul
    • [PATCH v3 0/2] phy: qcom: qmp-pcie: Add support for Gen4 4-lane mode for X1E80100   Krzysztof Kozlowski
• [PATCH v3 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4   Abel Vesa
  • [PATCH v3 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4   Dmitry Baryshkov
    • [PATCH v3 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4   Johan Hovold
      • [PATCH v3 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4   Dmitry Baryshkov
• [PATCH v2 6/6] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1   Xu Yang
  • [PATCH v2 6/6] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1   Shawn Guo
    • [PATCH v2 6/6] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1   Xu Yang
• [PATCH v3 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"   Xu Yang
  • [PATCH v3 2/5] dt-bindings: usb: dwc3-imx8mp: add compatible string for imx95   Xu Yang
  • [PATCH v3 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Xu Yang
    • [PATCH v3 3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95   Vinod Koul
  • [PATCH v3 4/5] arm64: dts: imx95: add usb3 related nodes   Xu Yang
  • [PATCH v3 5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node   Xu Yang
• [PATCH 00/11] phy: simplify with cleanup.h and few other ideas   Krzysztof Kozlowski
  • [PATCH 01/11] phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
    • [PATCH 01/11] phy: broadcom: bcm-cygnus-pcie: Simplify with scoped for each OF child loop   Florian Fainelli
  • [PATCH 02/11] phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
    • [PATCH 02/11] phy: broadcom: brcm-sata: Simplify with scoped for each OF child loop   Florian Fainelli
  • [PATCH 03/11] phy: cadence: sierra: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
  • [PATCH 04/11] phy: hisilicon: usb2: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
  • [PATCH 05/11] phy: mediatek: tphy: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
  • [PATCH 06/11] phy: mediatek: xsphy: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
  • [PATCH 07/11] phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
    • [PATCH 07/11] phy: qcom: qmp-pcie-msm8996: Simplify with scoped for each OF child loop   Dmitry Baryshkov
  • [PATCH 08/11] phy: ti: am654-serdes: Use scoped device node handling to simplify error paths   Krzysztof Kozlowski
  • [PATCH 09/11] phy: ti: gmii-sel: Simplify with dev_err_probe()   Krzysztof Kozlowski
  • [PATCH 10/11] phy: ti: j721e-wiz: Drop OF node reference earlier for simpler code   Krzysztof Kozlowski
  • [PATCH 11/11] phy: ti: j721e-wiz: Simplify with scoped for each OF child loop   Krzysztof Kozlowski
  • [PATCH 00/11] phy: simplify with cleanup.h and few other ideas   Vinod Koul
• [PATCH V2 0/6] Enable IPQ5018 PCI support   Sricharan R
  • [PATCH V2 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy   Sricharan R
    • [PATCH V2 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy   Krzysztof Kozlowski
  • [PATCH V2 2/6] dt-bindings: PCI: qcom: Add IPQ5108 SoC   Sricharan R
    • [PATCH V2 2/6] dt-bindings: PCI: qcom: Add IPQ5108 SoC   Manivannan Sadhasivam
  • [PATCH V2 3/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver   Sricharan R
    • [PATCH V2 3/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver   Krzysztof Kozlowski
      • [PATCH V2 3/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver   Sricharan Ramabadhran
  • [PATCH V2 4/6] PCI: qcom: Add support for IPQ5018   Sricharan R
    • [PATCH V2 4/6] PCI: qcom: Add support for IPQ5018   Manivannan Sadhasivam
  • [PATCH V2 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes   Sricharan R
    • [PATCH V2 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes   Manivannan Sadhasivam
  • [PATCH V2 6/6] arm64: dts: qcom: ipq5018: Enable PCIe   Sricharan R
    • [PATCH V2 6/6] arm64: dts: qcom: ipq5018: Enable PCIe   Dmitry Baryshkov
      • [PATCH V2 6/6] arm64: dts: qcom: ipq5018: Enable PCIe   Sricharan Ramabadhran
  • [PATCH V2 0/6] Enable IPQ5018 PCI support   Krzysztof Kozlowski
• [PATCH 0/8] Add support for PCIe3 on x1e80100   Qiang Yu
  • [PATCH 3/8] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Qiang Yu
    • [PATCH 3/8] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Konrad Dybcio
      • [PATCH 3/8] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Qiang Yu
    • [PATCH 3/8] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Krzysztof Kozlowski
      • [PATCH 3/8] phy: qcom: qmp: Add phy register and clk setting for x1e80100 PCIe3   Qiang Yu
  • [PATCH 4/8] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
    • [PATCH 4/8] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Konrad Dybcio
      • [PATCH 4/8] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Qiang Yu
    • [PATCH 4/8] arm64: dts: qcom: x1e80100: Add support for PCIe3 on x1e80100   Krzysztof Kozlowski
  • [PATCH 5/8] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Qiang Yu
    • [PATCH 5/8] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x8   Krzysztof Kozlowski
  • [PATCH 6/8] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks   Qiang Yu
    • [PATCH 6/8] clk: qcom: gcc-x1e80100: Fix halt_check for pipediv2 clocks   Konrad Dybcio
  • [PATCH 7/8] arm64: dts: qcom: x1e80100-qcp: Add power supply and sideband signal for pcie3   Qiang Yu
    • [PATCH 7/8] arm64: dts: qcom: x1e80100-qcp: Add power supply and sideband signal for pcie3   Krzysztof Kozlowski
  • [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Qiang Yu
    • [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Konrad Dybcio
    • [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Dmitry Baryshkov
      • [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Manivannan Sadhasivam
      • [PATCH 8/8] PCI: qcom: Add support to PCIe slot power supplies   Qiang Yu
  • [PATCH 0/8] Add support for PCIe3 on x1e80100   Rob Herring (Arm)
• [PATCH 1/8] phy: qcom-qmp: pcs-pcie: Add v6.30 register offsets   Qiang Yu
  • [PATCH 1/8] phy: qcom-qmp: pcs-pcie: Add v6.30 register offsets   Krzysztof Kozlowski
    • [PATCH 1/8] phy: qcom-qmp: pcs-pcie: Add v6.30 register offsets   Qiang Yu
• [PATCH 2/8] phy: qcom-qmp: pcs: Add v6.30 register offsets   Qiang Yu
  • [PATCH 2/8] phy: qcom-qmp: pcs: Add v6.30 register offsets   Konrad Dybcio
• [PATCH v3 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
  • [PATCH 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
    • [PATCH 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Krzysztof Kozlowski
      • [PATCH 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
  • [PATCH 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
  • [PATCH 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
  • [PATCH 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
  • [PATCH 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
  • [PATCH v3 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Krzysztof Kozlowski
• [RFC 1/2] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
  • [RFC 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Adam Ford
    • [RFC 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Dominique Martinet
      • [RFC 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Adam Ford
      • [RFC 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Adam Ford
• [PATCH v4 0/5] Add STM32MP25 USB3/PCIE COMBOPHY driver   Christian Bruel
  • [PATCH v4 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
    • [PATCH v4 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Conor Dooley
      • [PATCH v4 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
      • [PATCH v4 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Conor Dooley
      • [PATCH v4 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
      • [PATCH v4 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Conor Dooley
      • [PATCH v4 1/5] dt-bindings: phy: Add STM32MP25 COMBOPHY bindings   Christian Bruel
  • [PATCH v4 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Christian Bruel
    • [PATCH v4 2/5] phy: stm32: Add support for STM32MP25 COMBOPHY.   Vinod Koul
  • [PATCH v4 3/5] MAINTAINERS: add entry for ST STM32MP25 COMBOPHY driver   Christian Bruel
  • [PATCH v4 4/5] arm64: dts: st: Add combophy node on stm32mp251   Christian Bruel
  • [PATCH v4 5/5] arm64: dts: st: Enable COMBOPHY on the stm32mp257f-ev1 board   Christian Bruel
• [RFC V2 1/2] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
  • [RFC V2 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Adam Ford
    • [RFC V2 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Vinod Koul
      • [RFC V2 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Adam Ford
      • [RFC V2 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Vinod Koul
      • [RFC V2 2/2] phy: freescale: fsl-samsung-hdmi: Support dynamic integer divider   Adam Ford
• [PATCH 0/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
  • [PATCH 1/2] dt-bindings: phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
    • [PATCH 1/2] dt-bindings: phy: add NXP PTN3222 eUSB2 to USB2 redriver   Conor Dooley
  • [PATCH 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
    • [PATCH 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   neil.armstrong at linaro.org
      • [PATCH 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
    • [PATCH 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Konrad Dybcio
• [RFC V3 1/3] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro   Adam Ford
  • [RFC V3 2/3] phy: freescale: fsl-samsung-hdmi: Simplify REG21_PMS_S_MASK lookup   Adam Ford
  • [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
    • [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Dominique Martinet
      • [RFC V3 3/3] phy: freescale: fsl-samsung-hdmi: Support dynamic integer   Adam Ford
• [PATCH V3 0/6] Enable IPQ5018 PCI support   Sricharan R
  • [PATCH V3 5/6] arm64: dts: qcom: ipq5018: Add PCIe related nodes   Sricharan R
  • [PATCH V3 6/6] arm64: dts: qcom: ipq5018: Enable PCIe   Sricharan R
• [PATCH V3 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy   Sricharan R
  • [PATCH V3 1/6] dt-bindings: phy: qcom,uniphy-pcie: Document PCIe uniphy   Krzysztof Kozlowski
• [PATCH V3 2/6] dt-bindings: PCI: qcom: Add IPQ5108 SoC   Sricharan R
• [PATCH V3 3/6] phy: qcom: Introduce PCIe UNIPHY 28LP driver   Sricharan R
• [PATCH V3 4/6] PCI: qcom: Add support for IPQ5018   Sricharan R
• [PATCH v2 0/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
  • [PATCH v2 1/2] dt-bindings: phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
  • [PATCH v2 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
    • [PATCH v2 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Song Xue
      • [PATCH v2 2/2] phy: add NXP PTN3222 eUSB2 to USB2 redriver   Dmitry Baryshkov
• [PATCH] dt-bindings: phy: cadence-sierra: Allow PHY types QSGMII and SGMII   Siddharth Vadapalli
  • [PATCH] dt-bindings: phy: cadence-sierra: Allow PHY types QSGMII and SGMII   Conor Dooley
• [PATCH v7 4/6] drm/msm: add msm8998 hdmi phy/pll support   Dmitry Baryshkov
• [PATCH 0/6] power: supply: Change usb_types from an array into a bitmask   Hans de Goede
  • [PATCH 1/6] power: supply: "usb_type" property may be written to   Hans de Goede
  • [PATCH 2/6] power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values   Hans de Goede
  • [PATCH 3/6] power: supply: rt9467-charger: Remove "usb_type" property write support   Hans de Goede
  • [PATCH 4/6] power: supply: sysfs: Add power_supply_show_enum_with_available() helper   Hans de Goede
  • [PATCH 5/6] power: supply: sysfs: Move power_supply_show_enum_with_available() up   Hans de Goede
  • [PATCH 6/6] power: supply: Change usb_types from an array into a bitmask   Hans de Goede

Last message date: Sat Aug 31 07:20:39 PDT 2024
Archived on: Sat Aug 31 07:21:35 PDT 2024

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...