[PATCH v2 3/3] phy: phy-rockchip-inno-usb2: Improve error handling while probing

[Dragan Simic]

On 2024-08-21 10:44, Heiko Stübner wrote:
> Am Mittwoch, 21. August 2024, 09:37:55 CEST schrieb Dragan Simic:
>> Improve error handling in the probe path by using function 
>> dev_err_probe()
>> where appropriate, and by no longer using it rather pointlessly in one 
>> place
>> that actually produces a single, hardcoded error code.
>> 
>> Signed-off-by: Dragan Simic <dsimic at manjaro.org>
> 
>> @@ -1375,8 +1372,10 @@ static int rockchip_usb2phy_probe(struct 
>> platform_device *pdev)
>>  	rphy->irq = platform_get_irq_optional(pdev, 0);
>>  	platform_set_drvdata(pdev, rphy);
>> 
>> -	if (!phy_cfgs)
>> -		return dev_err_probe(dev, -EINVAL, "phy configs are not 
>> assigned!\n");
>> +	if (!phy_cfgs) {
>> +		dev_err(dev, "phy configs are not assigned\n");
>> +		return -EINVAL;
>> +	}
>> 
>>  	ret = rockchip_usb2phy_extcon_register(rphy);
>>  	if (ret)
> 
> I really don't understand the rationale here. Using dev_err_probe here
> is just fine and with that change you just introduce more lines of code
> for exactly the same functionality?

As we know, dev_err_probe() decides how to log the received error 
message
based on the error code it receives, but in this case the error code is
hardcoded as -EINVAL.  Thus, in this case it isn't about keeping the LoC
count a bit lower, but about using dev_err() where the resulting outcome
of error logging is aleady known, and where logging the error code 
actually
isn't helpful, because it's hardcoded and the logged error message 
already
tells everything about the error condition.

In other words, it's about being as precise as possible when deciding 
between
dev_err() and dev_err_probe(), in both directions.  I hope it makes 
sense.