[PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"

[Frank Li]

On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote:
> On 06/08/2024 07:06, Xu Yang wrote:
> > The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
> > compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
> > to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
> > block. Since i.MX95 usb phy is able to switch SS lanes, this will also
> > add orientation-switch and port property to the file.
> >
> > Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> >
> > ---
> > Changes in v2:
> >  - replace minItems with description in reg property
> >  - remove orientation-switch and port
> >  - refer to usb-switch.yaml
> >  - use unevaluatedProperties
> > ---
> >  .../bindings/phy/fsl,imx8mq-usb-phy.yaml      | 42 ++++++++++++++++---
> >  1 file changed, 37 insertions(+), 5 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> > index dc3a3f709fea..6d6d211883ae 100644
> > --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> > @@ -11,12 +11,17 @@ maintainers:
> >
> >  properties:
> >    compatible:
> > -    enum:
> > -      - fsl,imx8mq-usb-phy
> > -      - fsl,imx8mp-usb-phy
> > +    oneOf:
> > +      - enum:
> > +          - fsl,imx8mq-usb-phy
> > +          - fsl,imx8mp-usb-phy
> > +      - items:
> > +          - const: fsl,imx95-usb-phy
> > +          - const: fsl,imx8mp-usb-phy
> >
> >    reg:
> > -    maxItems: 1
> > +    minItems: 1
> > +    maxItems: 2
> >
> >    "#phy-cells":
> >      const: 0
> > @@ -89,7 +94,34 @@ required:
> >    - clocks
> >    - clock-names
> >
> > -additionalProperties: false
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx95-usb-phy
> > +    then:
> > +      properties:
> > +        reg:
> > +          items:
> > +            - description: USB PHY Control range
> > +            - description: USB PHY TCA Block range
> > +    else:
> > +      properties:
> > +        reg:
> > +          maxItems: 1
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx95-usb-phy
> > +    then:
> > +      $ref: /schemas/usb/usb-switch.yaml#
>
> ref should be rather in top-level. You can always disallow certain
> properties for devices, if they are really not applicable.

There are some "required" in usb-switch.yaml,

oneOf:
  - required:
      - port
  - required:
      - ports

If put on the top, it may cause DTB check warning for other compatible
strings, which have not support usb-switch.

Frank
>
> Best regards,
> Krzysztof
>