[PATCH v3 1/2] dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the X1E80100 QMP PCIe PHY Gen4 x4
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Aug 30 03:42:10 PDT 2024
On Fri, Aug 23, 2024 at 10:04:15AM GMT, Abel Vesa wrote:
> The sixth PCIe instance on X1E80100 can be used in either 4-lane mode or
> 2-lane mode. Document the 4-lane mode as a separate compatible.
As the patches were merged, it's too late for this series, but as a
note: we should think of a way to describe the PHY configuration without
changing the compatibility strings. The hardware stays the same, it's
just the number of lanes being wired that changes.
The obvious way to handle platform-specific differences is by using
num-lanes property of the PCIe host and then passing required
configuration (num lanes, max speed, etc.) to the PCIe PHY via
phy_configure() call.
>
> Reviewed-by: Krzysztof Kozlowski <krzk at kernel.org>
> Reviewed-by: Johan Hovold <johan+linaro at kernel.org>
> Signed-off-by: Abel Vesa <abel.vesa at linaro.org>
> ---
> Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> index 03dbd02cf9e7..dcf4fa55fbba 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
> @@ -40,6 +40,7 @@ properties:
> - qcom,sm8650-qmp-gen4x2-pcie-phy
> - qcom,x1e80100-qmp-gen3x2-pcie-phy
> - qcom,x1e80100-qmp-gen4x2-pcie-phy
> + - qcom,x1e80100-qmp-gen4x4-pcie-phy
>
> reg:
> minItems: 1
> @@ -118,6 +119,7 @@ allOf:
> contains:
> enum:
> - qcom,sc8280xp-qmp-gen3x4-pcie-phy
> + - qcom,x1e80100-qmp-gen4x4-pcie-phy
> then:
> properties:
> reg:
> @@ -169,6 +171,7 @@ allOf:
> - qcom,sc8280xp-qmp-gen3x1-pcie-phy
> - qcom,sc8280xp-qmp-gen3x2-pcie-phy
> - qcom,sc8280xp-qmp-gen3x4-pcie-phy
> + - qcom,x1e80100-qmp-gen4x4-pcie-phy
> then:
> properties:
> clocks:
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
More information about the linux-phy
mailing list