[PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"
Xu Yang
xu.yang_2 at nxp.com
Mon Aug 5 22:06:35 PDT 2024
The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
block. Since i.MX95 usb phy is able to switch SS lanes, this will also
add orientation-switch and port property to the file.
Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
---
Changes in v2:
- replace minItems with description in reg property
- remove orientation-switch and port
- refer to usb-switch.yaml
- use unevaluatedProperties
---
.../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++---
1 file changed, 37 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
index dc3a3f709fea..6d6d211883ae 100644
--- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
@@ -11,12 +11,17 @@ maintainers:
properties:
compatible:
- enum:
- - fsl,imx8mq-usb-phy
- - fsl,imx8mp-usb-phy
+ oneOf:
+ - enum:
+ - fsl,imx8mq-usb-phy
+ - fsl,imx8mp-usb-phy
+ - items:
+ - const: fsl,imx95-usb-phy
+ - const: fsl,imx8mp-usb-phy
reg:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
"#phy-cells":
const: 0
@@ -89,7 +94,34 @@ required:
- clocks
- clock-names
-additionalProperties: false
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx95-usb-phy
+ then:
+ properties:
+ reg:
+ items:
+ - description: USB PHY Control range
+ - description: USB PHY TCA Block range
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - fsl,imx95-usb-phy
+ then:
+ $ref: /schemas/usb/usb-switch.yaml#
+
+unevaluatedProperties: false
examples:
- |
--
2.34.1
More information about the linux-phy
mailing list