[PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S

Conor Dooley conor at kernel.org
Mon Aug 26 10:09:09 PDT 2024


On Mon, Aug 26, 2024 at 01:15:43PM +0300, claudiu beznea wrote:
> 
> 
> On 23.08.2024 19:33, Conor Dooley wrote:
> > On Fri, Aug 23, 2024 at 07:26:42PM +0300, claudiu beznea wrote:
> >> On 23.08.2024 19:18, Conor Dooley wrote:
> >>> On Fri, Aug 23, 2024 at 10:54:06AM +0300, claudiu beznea wrote:
> >>>> Hi, Conor,
> >>>>
> >>>> On 22.08.2024 19:42, Conor Dooley wrote:
> >>>>> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote:
> >>>>>> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> >>>>>>
> >>>>>> The RZ/G3S System controller has registers to control signals that need
> >>>>>> to be de-asserted/asserted before/after different SoC areas are power
> >>>>>> on/off. This signals are implemented as reset signals. For this document
> >>>>>> the #reset-cells property.
> >>>>>>
> >>>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
> >>>>>> ---
> >>>>>>  .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++
> >>>>>>  1 file changed, 16 insertions(+)
> >>>>>>
> >>>>>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
> >>>>>> index 4386b2c3fa4d..6b0bb34485d9 100644
> >>>>>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
> >>>>>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
> >>>>>> @@ -42,12 +42,28 @@ properties:
> >>>>>>        - const: cm33stbyr_int
> >>>>>>        - const: ca55_deny
> >>>>>>  
> >>>>>> +  "#reset-cells":
> >>>>>> +    const: 1
> >>>>>> +
> >>>>>>  required:
> >>>>>>    - compatible
> >>>>>>    - reg
> >>>>>>  
> >>>>>>  additionalProperties: false
> >>>>>>  
> >>>>>> +allOf:
> >>>>>> +  - if:
> >>>>>> +      properties:
> >>>>>> +        compatible:
> >>>>>> +          contains:
> >>>>>> +            const: renesas,r9a08g045-sysc
> >>>>>> +    then:
> >>>>>> +      required:
> >>>>>> +        - "#reset-cells"
> >>>>>
> >>>>> Given this is new required property on an existing platform, I'd expect
> >>>>> some mention of why it used to be okay to not have this but is now
> >>>>> required. Did firmware or a bootloader stage take things out of reset?
> >>>>
> >>>> On previous SoCs the SYS controller has no support for controlling the
> >>>> signals going to different peripherals (USB, PCIE in case of RZ/G3S).
> >>>> I'll add a note about this on next version.
> >>>
> >>> My initial thought here wasn't about previous SoCs though, it was
> >>> because you didn't add the compatible in this series for /this/ SoC.
> >>
> >> RZ/G3S compatible is already present in this file:
> >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml#n26
> > 
> > I know, first thing I did when I read the original patch was open the
> > file ;)
> > I don't care about the old SoCs, cos you're not applying the property to
> > them, so what's changed between SoCs isn't really relevant. It's a mention
> > of why, on this SoC, it is safe to add new required properties that I want.
> 
> 
> > 
> > AFAIU the answer is that no consumer of the resets existed before, so
> 
> That's true.
> 
> > there's not some special state there, and I am guessing that the new
> > sysc driver you're adding isn't going to fail to probe if there are no
> > resets, 
> 
> That's true.
> 
> it just won't register a reset controller?
> 
> It will register it but,
> 
> the new sysc driver is going to probe only for this SoC (RZ/G3S). On RZ/G3S
> we have 2 resets. These well be registered unconditionally, currently, only
> for RZ/G3S. If there will be no DT users for it then it should be no
> problem, AFAICT.

Okay, sounds it doesn't break for existing devicetrees.
Acked-by: Conor Dooley <conor.dooley at microchip.com>

Thanks,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-phy/attachments/20240826/ef09dafc/attachment-0001.sig>


More information about the linux-phy mailing list