[PATCH 14/16] arm64: dts: renesas: r9a08g045: Add USB support

Claudiu claudiu.beznea at tuxon.dev
Thu Aug 22 08:27:59 PDT 2024


From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>

Add USB nodes for the Renesas RZ/G3S SoC. This consists of PHY reset,
host and device support.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
---
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 119 +++++++++++++++++++++
 1 file changed, 119 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index cd7cefdb2bab..c6c279dffccf 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/r9a08g045-cpg.h>
+#include <dt-bindings/reset/renesas,r9a08g045-sysc.h>
 
 / {
 	compatible = "renesas,r9a08g045";
@@ -265,6 +266,124 @@ eth1: ethernet at 11c40000 {
 			status = "disabled";
 		};
 
+		phyrst: usbphy-ctrl at 11e00000 {
+			compatible = "renesas,r9a08g045-usbphy-ctrl";
+			reg = <0 0x11e00000 0 0x10000>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>;
+			resets = <&cpg R9A08G045_USB_PRESETN>,
+				 <&sysc R9A08G045_SYSC_RESET_USB>;
+			power-domains = <&cpg>;
+			#reset-cells = <1>;
+			status = "disabled";
+
+			usb0_vbus_otg: regulator-vbus {
+				regulator-name = "vbus";
+			};
+		};
+
+		ohci0: usb at 11e10000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11e10000 0 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci0: usb at 11e10100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11e10100 0 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2H0_HRESETN>;
+			phys = <&usb2_phy0 2>;
+			phy-names = "usb";
+			companion = <&ohci0>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy0: usb-phy at 11e10200 {
+			compatible = "renesas,usb2-phy-r9a08g045";
+			reg = <0 0x11e10200 0 0x700>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H0_HCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2H0_HRESETN>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb at 11e20000 {
+			compatible = "renesas,usbhs-r9a08g045",
+				     "renesas,rzg2l-usbhs";
+			reg = <0 0x11e20000 0 0x10000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2P_EXR_CPUCLK>;
+			resets = <&phyrst 0>,
+				 <&cpg R9A08G045_USB_U2P_EXL_SYSRST>;
+			renesas,buswait = <7>;
+			phys = <&usb2_phy0 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ohci1: usb at 11e30000 {
+			compatible = "generic-ohci";
+			reg = <0 0x11e30000 0 0x100>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A08G045_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci1: usb at 11e30100 {
+			compatible = "generic-ehci";
+			reg = <0 0x11e30100 0 0x100>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A08G045_USB_U2H1_HRESETN>;
+			phys = <&usb2_phy1 2>;
+			phy-names = "usb";
+			companion = <&ohci1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy1: usb-phy at 11e30200 {
+			compatible = "renesas,usb2-phy-r9a08g045";
+			reg = <0 0x11e30200 0 0x700>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD R9A08G045_USB_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_USB_U2H1_HCLK>;
+			resets = <&phyrst 1>,
+				 <&cpg R9A08G045_USB_U2H1_HRESETN>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller at 12400000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
-- 
2.39.2




More information about the linux-phy mailing list