[PATCH v1] phy: marvell: phy-mvebu-cp110-comphy: improve eth_port1 on comphy4

[Vinod Koul]

On Thu, 11 Jul 2024 15:12:47 +0200, Stefan Eichenberger wrote:
> According to the CN9100_MPP_information document, CP_SRD4 (comphy 4)
> supports 2500 BASE-X and 5000 BASE-R for ETH_PORT1. I was able to test
> that 2500 BASE-X is indeed supported. Unfortunately, our HW does not
> support 5000 BASE-R, but I assume from the document that it does, so I
> set the muxing there too to 0x1.
> 
> 
> [...]

Applied, thanks!

[1/1] phy: marvell: phy-mvebu-cp110-comphy: improve eth_port1 on comphy4
      commit: 8c9f085ae3384c5dfc0bc5f2f785b7adbf7d756b

Best regards,
-- 
Vinod Koul <vkoul at kernel.org>