[PATCH 2/4] phy: qualcomm: phy-qcom-apq8064-sata: Convert to devm_clk_get_enabled()
Vinod Koul
vkoul at kernel.org
Thu Aug 29 10:49:03 PDT 2024
On 22-08-24, 02:44, Yangtao Li wrote:
> Convert devm_clk_get(), clk_prepare_enable() to a single
> call to devm_clk_get_enabled(), as this is exactly
> what this function does.
Can you please resend this as a single thread. Threading is broken in
this series, I see 2, 3 patches, no idea where 1, 4 are...
>
> Signed-off-by: Yangtao Li <frank.li at vivo.com>
> ---
> drivers/phy/qualcomm/phy-qcom-apq8064-sata.c | 22 ++++----------------
> 1 file changed, 4 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
> index 3642a5d4f2f3..18c0dbd8e707 100644
> --- a/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
> +++ b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c
> @@ -68,7 +68,6 @@
>
> struct qcom_apq8064_sata_phy {
> void __iomem *mmio;
> - struct clk *cfg_clk;
> struct device *dev;
> };
>
> @@ -203,7 +202,7 @@ static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> struct phy_provider *phy_provider;
> struct phy *generic_phy;
> - int ret;
> + struct clk *cfg_clk;
>
> phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
> if (!phy)
> @@ -223,19 +222,14 @@ static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
> phy_set_drvdata(generic_phy, phy);
> platform_set_drvdata(pdev, phy);
>
> - phy->cfg_clk = devm_clk_get(dev, "cfg");
> - if (IS_ERR(phy->cfg_clk)) {
> + cfg_clk = devm_clk_get_enabled(dev, "cfg");
> + if (IS_ERR(cfg_clk)) {
> dev_err(dev, "Failed to get sata cfg clock\n");
> - return PTR_ERR(phy->cfg_clk);
> + return PTR_ERR(cfg_clk);
> }
>
> - ret = clk_prepare_enable(phy->cfg_clk);
> - if (ret)
> - return ret;
> -
> phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> if (IS_ERR(phy_provider)) {
> - clk_disable_unprepare(phy->cfg_clk);
> dev_err(dev, "%s: failed to register phy\n", __func__);
> return PTR_ERR(phy_provider);
> }
> @@ -243,13 +237,6 @@ static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
> return 0;
> }
>
> -static void qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
> -{
> - struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
> -
> - clk_disable_unprepare(phy->cfg_clk);
> -}
> -
> static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
> { .compatible = "qcom,apq8064-sata-phy" },
> { },
> @@ -258,7 +245,6 @@ MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
>
> static struct platform_driver qcom_apq8064_sata_phy_driver = {
> .probe = qcom_apq8064_sata_phy_probe,
> - .remove_new = qcom_apq8064_sata_phy_remove,
> .driver = {
> .name = "qcom-apq8064-sata-phy",
> .of_match_table = qcom_apq8064_sata_phy_of_match,
> --
> 2.39.0
--
~Vinod
More information about the linux-phy
mailing list