[PATCH 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"

[Xu Yang]

On Sun, Aug 04, 2024 at 04:16:34PM +0200, Krzysztof Kozlowski wrote:
> On 02/08/2024 11:16, Xu Yang wrote:
> > The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
> > compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
> > to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
> > block. Since i.MX95 usb phy is able to switch SS lanes, this will also
> > add orientation-switch and port property to the file.
> > 
> > Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
> > ---
> >  .../bindings/phy/fsl,imx8mq-usb-phy.yaml      | 40 +++++++++++++++++--
> >  1 file changed, 36 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> > index dc3a3f709fea..b0a614a9556d 100644
> > --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> > @@ -11,12 +11,17 @@ maintainers:
> >  
> >  properties:
> >    compatible:
> > -    enum:
> > -      - fsl,imx8mq-usb-phy
> > -      - fsl,imx8mp-usb-phy
> > +    oneOf:
> > +      - enum:
> > +          - fsl,imx8mq-usb-phy
> > +          - fsl,imx8mp-usb-phy
> > +      - items:
> > +          - const: fsl,imx95-usb-phy
> > +          - const: fsl,imx8mp-usb-phy
> >  
> >    reg:
> > -    maxItems: 1
> > +    minItems: 1
> > +    maxItems: 2
> >  
> >    "#phy-cells":
> >      const: 0
> > @@ -28,6 +33,17 @@ properties:
> >      items:
> >        - const: phy
> >  
> > +  orientation-switch:
> > +    description:
> > +      Flag the PHY as possible handler of USB Type-C orientation switching
> 
> No need to duplicate definitions of properties.

Okay. I need to use usb-switch.

> 
> > +    type: boolean
> > +
> > +  port:
> > +    $ref: /schemas/graph.yaml#/properties/port
> > +    description:
> > +      A port node to link the PHY to a TypeC controller for the purpose of
> > +      handling orientation switching.
> 
> Same here. You probably miss reference to usb-switch.

Okay.

> 
> > +
> >    power-domains:
> >      maxItems: 1
> >  
> > @@ -89,6 +105,22 @@ required:
> >    - clocks
> >    - clock-names
> >  
> > +allOf:
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - fsl,imx95-usb-phy
> > +    then:
> > +      properties:
> > +        reg:
> > +          minItems: 2
> 
> list and describe the items here, instead.

Okay.

Thanks,
Xu Yang

> 
> 
> Krzysztof
>