[PATCH 02/16] dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add #reset-cells for RZ/G3S

claudiu beznea claudiu.beznea at tuxon.dev
Fri Aug 23 00:54:06 PDT 2024


Hi, Conor,

On 22.08.2024 19:42, Conor Dooley wrote:
> On Thu, Aug 22, 2024 at 06:27:47PM +0300, Claudiu wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>>
>> The RZ/G3S System controller has registers to control signals that need
>> to be de-asserted/asserted before/after different SoC areas are power
>> on/off. This signals are implemented as reset signals. For this document
>> the #reset-cells property.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>> ---
>>  .../bindings/soc/renesas/renesas,rzg2l-sysc.yaml | 16 ++++++++++++++++
>>  1 file changed, 16 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
>> index 4386b2c3fa4d..6b0bb34485d9 100644
>> --- a/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
>> +++ b/Documentation/devicetree/bindings/soc/renesas/renesas,rzg2l-sysc.yaml
>> @@ -42,12 +42,28 @@ properties:
>>        - const: cm33stbyr_int
>>        - const: ca55_deny
>>  
>> +  "#reset-cells":
>> +    const: 1
>> +
>>  required:
>>    - compatible
>>    - reg
>>  
>>  additionalProperties: false
>>  
>> +allOf:
>> +  - if:
>> +      properties:
>> +        compatible:
>> +          contains:
>> +            const: renesas,r9a08g045-sysc
>> +    then:
>> +      required:
>> +        - "#reset-cells"
> 
> Given this is new required property on an existing platform, I'd expect
> some mention of why it used to be okay to not have this but is now
> required. Did firmware or a bootloader stage take things out of reset?

On previous SoCs the SYS controller has no support for controlling the
signals going to different peripherals (USB, PCIE in case of RZ/G3S).
I'll add a note about this on next version.

Thank you,
Claudiu Beznea


> 
>> +    else:
>> +      properties:
>> +        "#reset-cells": false
>> +
>>  examples:
>>    - |
>>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>> -- 
>> 2.39.2
>>



More information about the linux-phy mailing list