[PATCH v2 1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy"

[Krzysztof Kozlowski]

On 07/08/2024 07:57, Xu Yang wrote:
> On Wed, Aug 07, 2024 at 07:48:43AM +0200, Krzysztof Kozlowski wrote:
>> On 06/08/2024 18:11, Frank Li wrote:
>>> On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote:
>>>> On 06/08/2024 07:06, Xu Yang wrote:
>>>>> The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
>>>>> compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
>>>>> to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
>>>>> block. Since i.MX95 usb phy is able to switch SS lanes, this will also
>>>>> add orientation-switch and port property to the file.
>>>>>
>>>>> Signed-off-by: Xu Yang <xu.yang_2 at nxp.com>
>>>>>
>>>>> ---
>>>>> Changes in v2:
>>>>>  - replace minItems with description in reg property
>>>>>  - remove orientation-switch and port
>>>>>  - refer to usb-switch.yaml
>>>>>  - use unevaluatedProperties
>>>>> ---
>>>>>  .../bindings/phy/fsl,imx8mq-usb-phy.yaml      | 42 ++++++++++++++++---
>>>>>  1 file changed, 37 insertions(+), 5 deletions(-)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
>>>>> index dc3a3f709fea..6d6d211883ae 100644
>>>>> --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
>>>>> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
>>>>> @@ -11,12 +11,17 @@ maintainers:
>>>>>
>>>>>  properties:
>>>>>    compatible:
>>>>> -    enum:
>>>>> -      - fsl,imx8mq-usb-phy
>>>>> -      - fsl,imx8mp-usb-phy
>>>>> +    oneOf:
>>>>> +      - enum:
>>>>> +          - fsl,imx8mq-usb-phy
>>>>> +          - fsl,imx8mp-usb-phy
>>>>> +      - items:
>>>>> +          - const: fsl,imx95-usb-phy
>>>>> +          - const: fsl,imx8mp-usb-phy
>>>>>
>>>>>    reg:
>>>>> -    maxItems: 1
>>>>> +    minItems: 1
>>>>> +    maxItems: 2
>>>>>
>>>>>    "#phy-cells":
>>>>>      const: 0
>>>>> @@ -89,7 +94,34 @@ required:
>>>>>    - clocks
>>>>>    - clock-names
>>>>>
>>>>> -additionalProperties: false
>>>>> +allOf:
>>>>> +  - if:
>>>>> +      properties:
>>>>> +        compatible:
>>>>> +          contains:
>>>>> +            enum:
>>>>> +              - fsl,imx95-usb-phy
>>>>> +    then:
>>>>> +      properties:
>>>>> +        reg:
>>>>> +          items:
>>>>> +            - description: USB PHY Control range
>>>>> +            - description: USB PHY TCA Block range
>>>>> +    else:
>>>>> +      properties:
>>>>> +        reg:
>>>>> +          maxItems: 1
>>>>> +
>>>>> +  - if:
>>>>> +      properties:
>>>>> +        compatible:
>>>>> +          contains:
>>>>> +            enum:
>>>>> +              - fsl,imx95-usb-phy
>>>>> +    then:
>>>>> +      $ref: /schemas/usb/usb-switch.yaml#
>>>>
>>>> ref should be rather in top-level. You can always disallow certain
>>>> properties for devices, if they are really not applicable.
>>>
>>> There are some "required" in usb-switch.yaml,
>>>
>>> oneOf:
>>>   - required:
>>>       - port
>>>   - required:
>>>       - ports
>>>
>>> If put on the top, it may cause DTB check warning for other compatible
>>> strings, which have not support usb-switch.
>>
>> Hm, indeed, that's unusual case to have such different devices in one
>> schema. Did you test that above $ref in if: actually works?
> 
> Yes, it works and this yaml pass dt_binding_check and dtbs_check. 

I know it passes, I am asking whether it actually works. Is the $ref
actually effective? Is it properly applied?

Best regards,
Krzysztof