October 2017 Archives by subject
Starting: Sun Oct 1 22:31:23 PDT 2017
Ending: Tue Oct 31 14:52:52 PDT 2017
Messages: 152
- [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"
Ulrich Ölmann
- [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"
Ulrich Ölmann
- [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"
Ulrich Ölmann
- [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"
Sascha Hauer
- [PATCH 0/2] spi: imx: don't loop endlessly
Uwe Kleine-König
- [PATCH 0/3] e1000: access to flash on i210
Uwe Kleine-König
- [PATCH 0/3] gpiolib: introduce gpio initializer
Sascha Hauer
- [PATCH 0/3] gpiolib: introduce gpio initializer
Uwe Kleine-König
- [PATCH 0/5] sandbox: add gpio support with libftdi1
Antony Pavlov
- [PATCH 1/1] EFI: add poweroff support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] EFI: add poweroff support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted
Ulrich Ölmann
- [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted
Uwe Kleine-König
- [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted
Ulrich Ölmann
- [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted
Ulrich Ölmann
- [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition
Sascha Hauer
- [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line()
Nikita Yushchenko
- [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line()
Chris Healy
- [PATCH 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable
Uwe Kleine-König
- [PATCH 1/3] common: Add autoenable for components
Daniel Schultz
- [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}
Uwe Kleine-König
- [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}
Andrey Smirnov
- [PATCH 1/3] e1000: implement register mapping for E1000_{EERD,FLSW{CTL,DATA,CNT}}
Uwe Kleine-König
- [PATCH 1/5] ARM: boards: phytec-som-am335x: Add unified MLO
Daniel Schultz
- [PATCH 1/5] commands: nv: fail with verbose message if invoked without args
Enrico Jorns
- [PATCH 1/5] commands: nv: fail with verbose message if invoked without args
Stefan Lengfeld
- [PATCH 1/5] commands: nv: fail with verbose message if invoked without args
Enrico Jörns
- [PATCH 1/5] sandbox: avoid symbol conflict for {open,read,close}dir
Antony Pavlov
- [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted
Ulrich Ölmann
- [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted
Ulrich Ölmann
- [PATCH 2/2] efi-block: detect when the block device is a USB Disk
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/2] i.MX6ull evk support
Philipp Zabel
- [PATCH 2/3] ARM: dts: AM335x: Add dummy i2c nodes
Daniel Schultz
- [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions
Uwe Kleine-König
- [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions
Sascha Hauer
- [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions
Uwe Kleine-König
- [PATCH 2/3] e1000: implement support for smaller flash chips
Uwe Kleine-König
- [PATCH 2/3] e1000: implement support for smaller flash chips
Andrey Smirnov
- [PATCH 2/3] fbtest: add solid pattern
Nikita Yushchenko
- [PATCH 2/5] ARM: dts: AM335x: Add state framework
Daniel Schultz
- [PATCH 2/5] commands: nv: call nvvar_print() only if no argument is given
Enrico Jorns
- [PATCH 2/5] sandbox: add gpio support with libftdi1
Antony Pavlov
- [PATCH 2/5] sandbox: add gpio support with libftdi1
Sascha Hauer
- [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler
Uwe Kleine-König
- [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler
Sascha Hauer
- [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler
Uwe Kleine-König
- [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler
Sascha Hauer
- [PATCH 3/3] ARM: phytec-som-am335x: Add autoenable
Daniel Schultz
- [PATCH 3/3] fbtest: add gradients pattern
Nikita Yushchenko
- [PATCH 3/3] fbtest: add gradients pattern
Sam Ravnborg
- [PATCH 3/3] fbtest: add gradients pattern
Sascha Hauer
- [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle
Uwe Kleine-König
- [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle
Uwe Kleine-König
- [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle
Andrey Smirnov
- [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle
Uwe Kleine-König
- [PATCH 3/5] ARM: configs: am335x_defconfig: Add state config
Daniel Schultz
- [PATCH 3/5] commands: nv: assure error code will be returned when an error occurred
Enrico Jorns
- [PATCH 3/5] sandbox: parse libftdi options
Antony Pavlov
- [PATCH 3/5] sandbox: parse libftdi options
Sascha Hauer
- [PATCH 3/5] sandbox: parse libftdi options
Sascha Hauer
- [PATCH 3/5] sandbox: parse libftdi options
Antony Pavlov
- [PATCH 3/5] sandbox: parse libftdi options
Sascha Hauer
- [PATCH 3/5] sandbox: parse libftdi options
Antony Pavlov
- [PATCH 4/5] common: globvar: let nvvar_remove() report non-existing variable
Enrico Jorns
- [PATCH 4/5] common: state: Make find_var public
Daniel Schultz
- [PATCH 4/5] sandbox_defconfig: enable gpio, spi, i2c and led stuff
Antony Pavlov
- [PATCH 5/5] ARM: phytec-som-am335x: Set MAC addresses from state
Daniel Schultz
- [PATCH 5/5] commands: nv: adjust command help
Enrico Jorns
- [PATCH 5/5] commands: nv: adjust command help
Sam Ravnborg
- [PATCH 5/5] commands: nv: adjust command help
Enrico Jörns
- [PATCH 5/5] sandbox: dts: add i2c and spi libftdi1 bit-bang example
Antony Pavlov
- [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes
Lucas Stach
- [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes
Sascha Hauer
- [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL
Philipp Zabel
- [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL
Sascha Hauer
- [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes
Steffen Trumtrar
- [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes
Sascha Hauer
- [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning
Antony Pavlov
- [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning
Sascha Hauer
- [PATCH] efi: add missing Kconfig selects
Enrico Jorns
- [PATCH] efi: add missing Kconfig selects
Sascha Hauer
- [PATCH] EFI: add poweroff support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] EFI: add poweroff support
Sascha Hauer
- [PATCH] elf.h: Use EI_NIDENT instead of numeric value
Antony Pavlov
- [PATCH] elf.h: Use EI_NIDENT instead of numeric value
Sascha Hauer
- [PATCH] graphic_utils: Fix freeing uninitialzed pointer in fb_open()
Sascha Hauer
- [PATCH] Marvell: implement marvell_of_reg_init
Clément Leger
- [PATCH] Marvell: implement marvell_of_reg_init
Sascha Hauer
- [PATCH] mtd: m25p80: make it possible to use 4K erase block
Antony Pavlov
- [PATCH] mtd: m25p80: make it possible to use 4K erase block
Sascha Hauer
- [PATCH] mtd: m25p80: make it possible to use 4K erase block
Antony Pavlov
- [PATCH] net: ag71xx: define parent devices
Sascha Hauer
- [PATCH] OMAP_GPMC: this driver depends on MTD
Juergen Borleis
- [PATCH] OMAP_GPMC: this driver depends on MTD
Sascha Hauer
- [PATCH] regmap: port regmap_update_bits from linux
Steffen Trumtrar
- [PATCH] regmap: port regmap_update_bits from linux
Sascha Hauer
- [PATCH] UBI: attach: add missing newline at end of pr_err()
Marc Kleine-Budde
- [PATCH] UBI: attach: add missing newline at end of pr_err()
Sascha Hauer
- [PATCH] usb: imx: implement support for "over-current-active-high" property
Uwe Kleine-König
- [PATCH] usb: imx: implement support for "over-current-active-high" property
Sascha Hauer
- [PATCH v1 1/2] ccryptlib: library for encrypting/decrypting
Gerd Pauli
- [PATCH v1 1/2] clk: add ar9344 clock driver
Sascha Hauer
- [PATCH v1 2/2] command ccrypt
Gerd Pauli
- [PATCH v1] writef: added command to write content of variable to file
Gerd Pauli
- [PATCH v1] writef: added command to write content of variable to file
Sascha Hauer
- [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions
Uwe Kleine-König
- [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions
Sascha Hauer
- [PATCH v2 0/3] e1000: fix access to companion flash chip
Uwe Kleine-König
- [PATCH v2 0/3] e1000: fix access to companion flash chip
Sascha Hauer
- [PATCH v2 0/5] Fixes for nv command handling
Enrico Jorns
- [PATCH v2 01/12] ARM: vexpress: always build relocatable image
Lucas Stach
- [PATCH v2 01/12] ARM: vexpress: always build relocatable image
Sascha Hauer
- [PATCH v2 02/12] of: populate clock providers before other devices
Lucas Stach
- [PATCH v2 03/12] clk: versatile: add basic clocks
Lucas Stach
- [PATCH v2 04/12] clocksource: sp804: silently ignore secondary instaces
Lucas Stach
- [PATCH v2 05/12] mci: mmci: add DT support
Lucas Stach
- [PATCH v2 06/12] ARM: vexpress: switch to DT probe and multi-image build
Lucas Stach
- [PATCH v2 07/12] ARM: vexpress: regenerate config
Lucas Stach
- [PATCH v2 08/12] docs: add qemu vexpress
Lucas Stach
- [PATCH v2 09/12] vexpress: use device tree provided by QEMU if available
Lucas Stach
- [PATCH v2 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable
Uwe Kleine-König
- [PATCH v2 1/3] e1000: implement register mapping for E1000_FLSW{CTL, DATA, CNT}
Uwe Kleine-König
- [PATCH v2 10/12] vexpress: add bootstate node to the device tree
Lucas Stach
- [PATCH v2 11/12] of: base: add function to copy a device tree node
Lucas Stach
- [PATCH v2 12/12] ARM: vexpress: add fixup handler for 'virtio, mmio' devices
Lucas Stach
- [PATCH v2 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions
Uwe Kleine-König
- [PATCH v2 2/3] e1000: implement support for smaller flash chips
Uwe Kleine-König
- [PATCH v2 3/3] ARM: i.MX: bbu-internal: update tqma6x to make use of new bbu handler
Uwe Kleine-König
- [PATCH v2 3/3] e1000: Don't poll for FLSWCTL.GLDONE before starting a flash transaction
Uwe Kleine-König
- [RFC v4 01/10] Add initial RISC-V architecture support
Oleksij Rempel
- [RFC v4 01/10] Add initial RISC-V architecture support
Daniel Schultz
- [RFC v4 01/10] Add initial RISC-V architecture support
Daniel Schultz
- [RFC v4 01/10] Add initial RISC-V architecture support
Antony Pavlov
- [RFC v4 01/10] Add initial RISC-V architecture support
Antony Pavlov
- [RFC v4 01/10] Add initial RISC-V architecture support
Antony Pavlov
- [RFC v4 01/10] Add initial RISC-V architecture support
Daniel Schultz
- [RFC v4 01/10] Add initial RISC-V architecture support
Antony Pavlov
- again [PATCH v1 2/2] command ccrypt
Gerd Pauli
- intel efi system too slow
Giorgio Dal Molin
- intel efi system too slow
Sascha Hauer
- Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled
Marcel Hamer
- Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled
Sascha Hauer
- Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled
Marcel Hamer
- Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled
Ian Abbott
- Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled
Marcel Hamer
- Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled
gianluca
- Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled
Marcel Hamer
- Terasic DE0 Nano SoC / SoCkit confusion
Ian Abbott
- Terasic DE0 Nano SoC / SoCkit confusion
Steffen Trumtrar
- Terasic DE0 Nano SoC / SoCkit confusion
Ian Abbott
- v2017.10.0
Sascha Hauer
Last message date:
Tue Oct 31 14:52:52 PDT 2017
Archived on: Tue Oct 31 14:53:18 PDT 2017
This archive was generated by
Pipermail 0.09 (Mailman edition).