[PATCH] usb: imx: implement support for "over-current-active-high" property

Sascha Hauer s.hauer at pengutronix.de
Fri Oct 27 01:47:45 PDT 2017


On Thu, Oct 26, 2017 at 11:59:17AM +0200, Uwe Kleine-König wrote:
> This property is already documented in the bindings and supported by
> Linux. As on i.MX25 the HW default is active high and up to now barebox
> didn't force this to low (which is the default for e.g. i.MX6), add the
> property to barebox' imx25.dtsi to keep existing behaviour. If on a
> board the OC pin is active low, you need to add
> 
> 	/delete-property/ over-current-active-high;
> 
> in the board.dts.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
> ---

Applied, thanks

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list