[PATCH 0/3] gpiolib: introduce gpio initializer

Sascha Hauer s.hauer at pengutronix.de
Thu Oct 5 21:29:00 PDT 2017


Hi,

On Tue, Sep 26, 2017 at 11:26:43PM +0200, Uwe Kleine-König wrote:
> Hello,
> 
> the target of this series is to allow gpios to be initialized but
> without the side effect that the gpios are unusable then (as is the case
> with gpio-hogs).
> 
> This can for example be used to prevent debug pins from floating when
> unused or keep a chip in reset until a matching driver is available.
> 
> I already tried to fix the binding, no feedback so far.
> See http://patchwork.ozlabs.org/patch/817695/ .

I'm delaying this for some time in the hope that upstream settles to
some solution.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



More information about the barebox mailing list