October 2017 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Oct 1 22:31:23 PDT 2017
Ending: Tue Oct 31 14:52:52 PDT 2017
Messages: 152

• [PATCH 0/2] spi: imx: don't loop endlessly   Uwe Kleine-König
• [RFC v4 01/10] Add initial RISC-V architecture support   Oleksij Rempel
  • [RFC v4 01/10] Add initial RISC-V architecture support   Daniel Schultz
    • [RFC v4 01/10] Add initial RISC-V architecture support   Antony Pavlov
  • [RFC v4 01/10] Add initial RISC-V architecture support   Daniel Schultz
    • [RFC v4 01/10] Add initial RISC-V architecture support   Antony Pavlov
      • [RFC v4 01/10] Add initial RISC-V architecture support   Daniel Schultz
      • [RFC v4 01/10] Add initial RISC-V architecture support   Antony Pavlov
  • [RFC v4 01/10] Add initial RISC-V architecture support   Antony Pavlov
• Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled   Marcel Hamer
  • Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled   Sascha Hauer
    • Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled   Marcel Hamer
      • Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled   Ian Abbott
      • Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled   Marcel Hamer
      • Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled   gianluca
      • Kernel device tree gets modified with bootm command when CONFIG_OFDEVICE is enabled   Marcel Hamer
• [PATCH] net: ag71xx: define parent devices   Sascha Hauer
• [PATCH v1 1/2] clk: add ar9344 clock driver   Sascha Hauer
• v2017.10.0   Sascha Hauer
• [PATCH 0/3] gpiolib: introduce gpio initializer   Sascha Hauer
  • [PATCH 0/3] gpiolib: introduce gpio initializer   Uwe Kleine-König
• [PATCH v1] writef: added command to write content of variable to file   Gerd Pauli
  • [PATCH v1] writef: added command to write content of variable to file   Sascha Hauer
• [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes   Steffen Trumtrar
  • [PATCH] ARM: socfpga: dts: sockit: remove upstreamed nodes   Sascha Hauer
• [PATCH] regmap: port regmap_update_bits from linux   Steffen Trumtrar
  • [PATCH] regmap: port regmap_update_bits from linux   Sascha Hauer
• [PATCH v1 1/2] ccryptlib: library for encrypting/decrypting   Gerd Pauli
• [PATCH v1 2/2] command ccrypt   Gerd Pauli
• again [PATCH v1 2/2] command ccrypt   Gerd Pauli
• [PATCH 0/3] e1000: access to flash on i210   Uwe Kleine-König
  • [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}   Uwe Kleine-König
    • [PATCH 1/3] e1000: implement register mapping for E1000_{EERD, FLSW{CTL, DATA, CNT}}   Andrey Smirnov
      • [PATCH 1/3] e1000: implement register mapping for E1000_{EERD,FLSW{CTL,DATA,CNT}}   Uwe Kleine-König
  • [PATCH 2/3] e1000: implement support for smaller flash chips   Uwe Kleine-König
    • [PATCH 2/3] e1000: implement support for smaller flash chips   Andrey Smirnov
  • [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle   Uwe Kleine-König
    • [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle   Uwe Kleine-König
      • [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle   Andrey Smirnov
      • [PATCH 3/3] HACK: e1000: don't check for FLSWCTL.GLDONE when waiting for idle   Uwe Kleine-König
• [PATCH] elf.h: Use EI_NIDENT instead of numeric value   Antony Pavlov
  • [PATCH] elf.h: Use EI_NIDENT instead of numeric value   Sascha Hauer
• [PATCH v2 0/3] e1000: fix access to companion flash chip   Uwe Kleine-König
  • [PATCH v2 1/3] e1000: implement register mapping for E1000_FLSW{CTL, DATA, CNT}   Uwe Kleine-König
  • [PATCH v2 0/3] e1000: fix access to companion flash chip   Sascha Hauer
• [PATCH v2 2/3] e1000: implement support for smaller flash chips   Uwe Kleine-König
• [PATCH v2 3/3] e1000: Don't poll for FLSWCTL.GLDONE before starting a flash transaction   Uwe Kleine-König
• [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning   Antony Pavlov
  • [PATCH] eeprom: at24: fix 'assignment from incompatible pointer type' warning   Sascha Hauer
• [PATCH 0/5] sandbox: add gpio support with libftdi1   Antony Pavlov
  • [PATCH 1/5] sandbox: avoid symbol conflict for {open,read,close}dir   Antony Pavlov
  • [PATCH 2/5] sandbox: add gpio support with libftdi1   Antony Pavlov
    • [PATCH 2/5] sandbox: add gpio support with libftdi1   Sascha Hauer
  • [PATCH 3/5] sandbox: parse libftdi options   Antony Pavlov
    • [PATCH 3/5] sandbox: parse libftdi options   Sascha Hauer
      • [PATCH 3/5] sandbox: parse libftdi options   Antony Pavlov
      • [PATCH 3/5] sandbox: parse libftdi options   Sascha Hauer
      • [PATCH 3/5] sandbox: parse libftdi options   Antony Pavlov
      • [PATCH 3/5] sandbox: parse libftdi options   Sascha Hauer
  • [PATCH 4/5] sandbox_defconfig: enable gpio, spi, i2c and led stuff   Antony Pavlov
  • [PATCH 5/5] sandbox: dts: add i2c and spi libftdi1 bit-bang example   Antony Pavlov
• [PATCH] Marvell: implement marvell_of_reg_init   Clément Leger
  • [PATCH] Marvell: implement marvell_of_reg_init   Sascha Hauer
• [PATCH 2/2] i.MX6ull evk support   Philipp Zabel
• [PATCH] efi: add missing Kconfig selects   Enrico Jorns
  • [PATCH] efi: add missing Kconfig selects   Sascha Hauer
• [PATCH v2 01/12] ARM: vexpress: always build relocatable image   Lucas Stach
  • [PATCH v2 06/12] ARM: vexpress: switch to DT probe and multi-image build   Lucas Stach
  • [PATCH v2 01/12] ARM: vexpress: always build relocatable image   Sascha Hauer
• [PATCH v2 02/12] of: populate clock providers before other devices   Lucas Stach
• [PATCH v2 03/12] clk: versatile: add basic clocks   Lucas Stach
• [PATCH v2 04/12] clocksource: sp804: silently ignore secondary instaces   Lucas Stach
• [PATCH v2 05/12] mci: mmci: add DT support   Lucas Stach
• [PATCH v2 07/12] ARM: vexpress: regenerate config   Lucas Stach
• [PATCH v2 08/12] docs: add qemu vexpress   Lucas Stach
• [PATCH v2 09/12] vexpress: use device tree provided by QEMU if available   Lucas Stach
• [PATCH v2 10/12] vexpress: add bootstate node to the device tree   Lucas Stach
• [PATCH v2 11/12] of: base: add function to copy a device tree node   Lucas Stach
• [PATCH v2 12/12] ARM: vexpress: add fixup handler for 'virtio, mmio' devices   Lucas Stach
• [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL   Philipp Zabel
  • [PATCH] ARM: imx: imx6ull-evk: select ARCH_IMX6UL instead of ARCH_IMX6ULL   Sascha Hauer
• [PATCH] mtd: m25p80: make it possible to use 4K erase block   Antony Pavlov
  • [PATCH] mtd: m25p80: make it possible to use 4K erase block   Sascha Hauer
    • [PATCH] mtd: m25p80: make it possible to use 4K erase block   Antony Pavlov
• [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line()   Nikita Yushchenko
  • [PATCH 2/3] fbtest: add solid pattern   Nikita Yushchenko
  • [PATCH 3/3] fbtest: add gradients pattern   Nikita Yushchenko
    • [PATCH 3/3] fbtest: add gradients pattern   Sam Ravnborg
      • [PATCH 3/3] fbtest: add gradients pattern   Sascha Hauer
  • [PATCH 1/3] 2d-primitives: fix missing pixel in gu_draw_line()   Chris Healy
• [PATCH] UBI: attach: add missing newline at end of pr_err()   Marc Kleine-Budde
  • [PATCH] UBI: attach: add missing newline at end of pr_err()   Sascha Hauer
• [PATCH] OMAP_GPMC: this driver depends on MTD   Juergen Borleis
  • [PATCH] OMAP_GPMC: this driver depends on MTD   Sascha Hauer
• [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"   Ulrich Ölmann
  • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted   Ulrich Ölmann
    • [PATCH 2/2] commands: spi: do not restrict spi's data to be hex-formatted   Ulrich Ölmann
  • [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"   Ulrich Ölmann
    • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted   Ulrich Ölmann
    • [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"   Ulrich Ölmann
    • [PATCH 0/2] Allow decimally formatted data for the commands "i2c_write" and "spi"   Sascha Hauer
• [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted   Ulrich Ölmann
  • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted   Uwe Kleine-König
    • [PATCH 1/2] commands: i2c: do not restrict i2c_write's data to be hex-formatted   Ulrich Ölmann
• intel efi system too slow   Giorgio Dal Molin
  • intel efi system too slow   Sascha Hauer
• [PATCH 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable   Uwe Kleine-König
  • [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions   Uwe Kleine-König
    • [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions   Sascha Hauer
      • [PATCH 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions   Uwe Kleine-König
  • [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler   Uwe Kleine-König
    • [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler   Sascha Hauer
      • [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler   Uwe Kleine-König
      • [PATCH 3/3] ARM: i.MX: bbu-internal: update board files to make use of new bbu handler   Sascha Hauer
• Terasic DE0 Nano SoC / SoCkit confusion   Ian Abbott
  • Terasic DE0 Nano SoC / SoCkit confusion   Steffen Trumtrar
    • Terasic DE0 Nano SoC / SoCkit confusion   Ian Abbott
• [PATCH] graphic_utils: Fix freeing uninitialzed pointer in fb_open()   Sascha Hauer
• [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes   Lucas Stach
  • [PATCH] arm: bootm: don't fall over if image is padded with less than 40 bytes   Sascha Hauer
• [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions   Uwe Kleine-König
  • [PATCH v2 2/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions   Uwe Kleine-König
  • [PATCH v2 3/3] ARM: i.MX: bbu-internal: update tqma6x to make use of new bbu handler   Uwe Kleine-König
  • [PATCH v2 0/3] ARM: i.MX: bbu-internal: new handler to make use of mmc boot partitions   Sascha Hauer
• [PATCH v2 1/3] ARM: i.MX: bbu-internal: make filename for device to write to adaptable   Uwe Kleine-König
• [PATCH] usb: imx: implement support for "over-current-active-high" property   Uwe Kleine-König
  • [PATCH] usb: imx: implement support for "over-current-active-high" property   Sascha Hauer
• [PATCH 1/1] EFI: add poweroff support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/1] EFI: add poweroff support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] EFI: add poweroff support   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH] EFI: add poweroff support   Sascha Hauer
• [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 2/2] efi-block: detect when the block device is a USB Disk   Jean-Christophe PLAGNIOL-VILLARD
  • [PATCH 1/2] efi-gui: add USB IO Protocol GUID definition   Sascha Hauer
• [PATCH 1/5] ARM: boards: phytec-som-am335x: Add unified MLO   Daniel Schultz
  • [PATCH 4/5] common: state: Make find_var public   Daniel Schultz
• [PATCH 2/5] ARM: dts: AM335x: Add state framework   Daniel Schultz
• [PATCH 3/5] ARM: configs: am335x_defconfig: Add state config   Daniel Schultz
• [PATCH 5/5] ARM: phytec-som-am335x: Set MAC addresses from state   Daniel Schultz
• [PATCH 1/3] common: Add autoenable for components   Daniel Schultz
  • [PATCH 2/3] ARM: dts: AM335x: Add dummy i2c nodes   Daniel Schultz
• [PATCH 3/3] ARM: phytec-som-am335x: Add autoenable   Daniel Schultz
• [PATCH v2 0/5] Fixes for nv command handling   Enrico Jorns
  • [PATCH 3/5] commands: nv: assure error code will be returned when an error occurred   Enrico Jorns
• [PATCH 1/5] commands: nv: fail with verbose message if invoked without args   Enrico Jorns
  • [PATCH 1/5] commands: nv: fail with verbose message if invoked without args   Stefan Lengfeld
    • [PATCH 1/5] commands: nv: fail with verbose message if invoked without args   Enrico Jörns
• [PATCH 2/5] commands: nv: call nvvar_print() only if no argument is given   Enrico Jorns
• [PATCH 4/5] common: globvar: let nvvar_remove() report non-existing variable   Enrico Jorns
• [PATCH 5/5] commands: nv: adjust command help   Enrico Jorns
  • [PATCH 5/5] commands: nv: adjust command help   Sam Ravnborg
    • [PATCH 5/5] commands: nv: adjust command help   Enrico Jörns

Last message date: Tue Oct 31 14:52:52 PDT 2017
Archived on: Tue Oct 31 14:53:18 PDT 2017

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...