November 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Tue Nov 1 01:57:42 PDT 2016
Ending: Wed Nov 30 23:52:05 PST 2016
Messages: 211

• [PATCH] net: e1000: set edev parent pointer   Lucas Stach
  • [PATCH] net: e1000: set edev parent pointer   Sascha Hauer
• [PATCH 1/5] PCI: add some useful debug output   Lucas Stach
  • [PATCH 1/5] PCI: add some useful debug output   Sascha Hauer
• [PATCH 2/5] PCI: only check specific flag for 64bit BAR   Lucas Stach
• [PATCH 3/5] PCI: align address range before scanning bridge   Lucas Stach
• [PATCH 4/5] PCI: align BAR address to BAR size   Lucas Stach
• [PATCH 5/5] PCI: split PCI hierarchy enumeration and config from device registration   Lucas Stach
• [PATCH 1/2] fixup! watchdog: add designware driver   Steffen Trumtrar
  • [PATCH 2/2] fixup! ARM: socfpga: dtsi: add dw-wdt reset lines   Steffen Trumtrar
  • [PATCH 1/2] fixup! watchdog: add designware driver   Sascha Hauer
• [PATCH upstream 1/4] state: use packet attribute for on storage structs   Stefan Lengfeld
  • [PATCH upstream 3/4] state: fix state is not saved when string variable is changed   Stefan Lengfeld
  • [PATCH upstream 1/4] state: use packet attribute for on storage structs   Andrey Smirnov
  • [PATCH upstream 1/4] state: use packet attribute for on storage structs   Sascha Hauer
    • [PATCH upstream 1/4] state: use packet attribute for on storage structs   Stefan Lengfeld
• [PATCH upstream 2/4] state: fix indentation   Stefan Lengfeld
• [PATCH upstream 4/4] docs: state: make string variable type clearer   Stefan Lengfeld
• [PATCH v2] net: e1000: fix i210 register remapping   Andrey Smirnov
  • [PATCH v2] net: e1000: fix i210 register remapping   Sascha Hauer
• [PATCH] ARM: riotboard: fix barebox partition size   Sascha Hauer
• [PATCH] mtd: spi-nor: add MX25U2033E   Alexander Kurz
  • [PATCH] mtd: spi-nor: add MX25U2033E   Sascha Hauer
• [PATCH] scripts imx-image: add DCD NOP command support   Alexander Kurz
  • [PATCH] scripts imx-image: add DCD NOP command support   Sascha Hauer
• Configure RAM size on iMX53 board   Jose Luis Zabalza
  • Configure RAM size on iMX53 board   Andrey Smirnov
  • Configure RAM size on iMX53 board   Sascha Hauer
    • Configure RAM size on iMX53 board   Jose Luis Zabalza
      • Configure RAM size on iMX53 board   Sascha Hauer
      • Configure RAM size on iMX53 board   Jose Luis Zabalza
      • Configure RAM size on iMX53 board   Sascha Hauer
      • Configure RAM size on iMX53 board   Jose Luis Zabalza
      • Configure RAM size on iMX53 board   Sascha Hauer
      • Configure RAM size on iMX53 board   Jose Luis Zabalza
      • Configure RAM size on iMX53 board   Sascha Hauer
• [PATCH] mfd: mc13892: more descriptive charger register defines   Alexander Kurz
  • [PATCH] mfd: mc13892: more descriptive charger register defines   Sascha Hauer
• Fwd: boot kernel with append device tree   Sascha Hauer
  • Fwd: boot kernel with append device tree   Alex Vazquez
    • Fwd: boot kernel with append device tree   Sascha Hauer
      • Fwd: boot kernel with append device tree   Alex Vazquez
      • Fwd: boot kernel with append device tree   Sascha Hauer
      • Fwd: boot kernel with append device tree   Alex Vazquez
• [PATCH] MIPS: drop redundant start_barebox() declaration   Antony Pavlov
  • [PATCH] MIPS: drop redundant start_barebox() declaration   Sascha Hauer
• [PATCH] command.h: drop unused Struct_Section attribute   Antony Pavlov
  • [PATCH] command.h: drop unused Struct_Section attribute   Sascha Hauer
• [PATCH] commands: spi: fix chip select validation   Stefan Lengfeld
  • [PATCH] commands: spi: fix chip select validation   Sascha Hauer
• Designware MAC reset timeout after Linux reboot   Ian Abbott
  • Designware MAC reset timeout after Linux reboot   Sascha Hauer
    • Designware MAC reset timeout after Linux reboot   Ian Abbott
      • Designware MAC reset timeout after Linux reboot   Ian Abbott
  • Designware MAC reset timeout after Linux reboot   Steffen Trumtrar
    • Designware MAC reset timeout after Linux reboot   Ian Abbott
• [PATCH 0/4] net/designware: A few patches from U-Boot   Ian Abbott
  • [PATCH 1/4] net/designware: Consecutive writes to the same register to be avoided   Ian Abbott
  • [PATCH 2/4] net/designware: Do not select MIIPORT for RGMII interface   Ian Abbott
  • [PATCH 3/4] net: designware: Respect "bus mode" register contents on SW reset   Ian Abbott
  • [PATCH 4/4] net/designware: add explicit reset of {tx|rx}_currdescnum   Ian Abbott
  • [PATCH 0/4] net/designware: A few patches from U-Boot   Sascha Hauer
    • [PATCH 0/4] net/designware: A few patches from U-Boot   Ian Abbott
  • [PATCH 0/4] net/designware: A few patches from U-Boot   Sascha Hauer
• [PATCH] net: phy: micrel: Do not overwrite reserved bits   Sascha Hauer
• [PATCH 1/2] of: partitions: Support new binding   Sascha Hauer
  • [PATCH 2/2] of: of_find_path: Add support for new partition binding   Sascha Hauer
• [PATCH] serial: i.MX uart: Allow DTE mode in lowlevel code   Sascha Hauer
• [PATCH] ARM: i.MX: OCOTP: Add functions to access fuses field wise   Sascha Hauer
• i.MX6ul support   Sascha Hauer
  • [PATCH 2/7] ARM: i.MX6ul: Add clock support   Sascha Hauer
  • [PATCH 3/7] ARM: i.MX6 gpt: Add i.MX6ul support   Sascha Hauer
  • [PATCH 4/7] pinmux: imx-iomux-v3: Add i.MX6ul support   Sascha Hauer
  • [PATCH 5/7] serial: i.MX: Add i.MX6ul support   Sascha Hauer
  • [PATCH 7/7] ARM: i.MX6 esdctl: Add i.MX6ul support   Sascha Hauer
• [PATCH 1/7] ARM: i.MX: beginning i.MX6ul support   Sascha Hauer
• [PATCH 6/7] ARM: i.MX: ocotp: Add i.MX6ul support   Sascha Hauer
• [PATCH] clk: add clock command completion   Sascha Hauer
• [PATCH v2 00/28] Vybrid support in Barebox   Andrey Smirnov
  • [PATCH v2 01/28] i.MX: Add primitive functions for VF610 family   Andrey Smirnov
  • [PATCH v2 02/28] i.MX: Add register definitions for VF610 SoC   Andrey Smirnov
  • [PATCH v2 03/28] i.MX: Add DEBUG_LL hooks for VF610   Andrey Smirnov
  • [PATCH v2 04/28] i.MX: scripts: Add "vf610" soc to imx-image   Andrey Smirnov
  • [PATCH v2 05/28] i.MX: Add support for VF610 Tower board   Andrey Smirnov
  • [PATCH v2 06/28] pinctrl: Add provisions to control GPIO pin direction   Andrey Smirnov
  • [PATCH v2 08/28] clk: Port clock dependency resolution code   Andrey Smirnov
  • [PATCH v2 09/28] clk: Port of_clk_set_defaults()   Andrey Smirnov
    • [PATCH v2 09/28] clk: Port of_clk_set_defaults()   Sascha Hauer
  • [PATCH v2 10/28] i.MX: Move clk code from 'mach-imx' to 'drivers'   Andrey Smirnov
  • [PATCH v2 11/28] i.MX: clk: Port imx_clk_gate2_cgr()   Andrey Smirnov
  • [PATCH v2 12/28] i.MX: clk: Add IMX_PLLV3_USB_VF610 support   Andrey Smirnov
  • [PATCH v2 13/28] i.MX: clk: Port imx_check_clocks()   Andrey Smirnov
  • [PATCH v2 14/28] i.MX: clk: Port imx_clk_mux_flags from Linux   Andrey Smirnov
  • [PATCH v2 15/28] i.MX: Add VF610 clock tree initialization code   Andrey Smirnov
  • [PATCH v2 16/28] vf610: Give enet_osc explicit "enet_ext" name   Andrey Smirnov
  • [PATCH v2 17/28] i.MX: Add 'lpuart' serial driver   Andrey Smirnov
  • [PATCH v2 18/28] i.MX: i2c: Use read/write adapter functions   Andrey Smirnov
  • [PATCH v2 19/28] i.MX: i2c: Add Vybrid support   Andrey Smirnov
  • [PATCH v2 20/28] i.MX: esdhc: Do not rely on CPU type for quirks   Andrey Smirnov
  • [PATCH v2 21/28] i.MX: esdhc: Request "per" clock explicitly   Andrey Smirnov
  • [PATCH v2 22/28] i.MX: Kconfig: Enable OCOTP on Vybrid   Andrey Smirnov
  • [PATCH v2 23/28] i.MX: ocotp: Remove unused #define   Andrey Smirnov
  • [PATCH v2 24/28] i.MX: ocotp: Account for shadow memory gaps   Andrey Smirnov
  • [PATCH v2 25/28] i.MX: ocotp: Add Vybrid support   Andrey Smirnov
  • [PATCH v2 26/28] i.MX: fec: Enable all clocks specified for FEC   Andrey Smirnov
  • [PATCH v2 27/28] i.MX: fec: Add support for Vybrid variant   Andrey Smirnov
  • [PATCH v2 28/28] gpio: Add GPIO driver for Vybrid   Andrey Smirnov
  • [PATCH v2 00/28] Vybrid support in Barebox   Sascha Hauer
• [PATCH v2 07/28] i.MX: Add pinctrl driver for VF610   Andrey Smirnov
• v2016.11.0   Sascha Hauer
  • v2016.11.0   Ian Abbott
    • v2016.11.0   Sascha Hauer
• Compiler issues   Jose Luis Zabalza
  • Compiler issues   Jose Luis Zabalza
    • Compiler issues   Andrey Smirnov
• [RFCv2 0/2] add initial RISC-V architecture support   Antony Pavlov
  • [RFCv2 1/2] serial: add driver for SiFive UART   Antony Pavlov
    • [RFCv2 1/2] serial: add driver for SiFive UART   Sascha Hauer
      • [RFCv2 1/2] serial: add driver for SiFive UART   Antony Pavlov
  • [RFCv2 2/2] add initial RISC-V architecture support   Antony Pavlov
• [PATCH] pcm049: Add 1 GByte RAM with DUAL DIE Single Rank   Maik Otto
  • [PATCH] pcm049: Add 1 GByte RAM with DUAL DIE Single Rank   Sascha Hauer
• usb otg port not working on an imx25 soc   iw3gtf at arcor.de
  • usb otg port not working on an imx25 soc   Sascha Hauer
• [PATCH v3 2/3] watchdog: add designware driver   Sascha Hauer
• [PATCH 1/2] regmap: Add regmap_write_bits() function   Andrey Smirnov
  • [PATCH 2/2] gpio: Port SX150x driver from Linux   Andrey Smirnov
  • [PATCH 1/2] regmap: Add regmap_write_bits() function   Sascha Hauer
• [PATCH] state: Documentation updates   Sascha Hauer
• [PATCH] ARM: i.MX: Add src fixup   Sascha Hauer
  • [PATCH] ARM: i.MX: Add src fixup   Sascha Hauer
• [PATCH] commands: i2c: Listen for CTRL-C when probing   Andrey Smirnov
  • [PATCH] commands: i2c: Listen for CTRL-C when probing   Sascha Hauer
• [PATCH] i2c-mux-pca954x: Add code to control reset line   Andrey Smirnov
  • [PATCH] i2c-mux-pca954x: Add code to control reset line   Sascha Hauer
• [PATCH 1/2] fixup! pinctrl: Add provisions to control GPIO pin direction   Andrey Smirnov
  • [PATCH 2/2] fixup! clk: Port of_clk_set_defaults()   Andrey Smirnov
  • [PATCH 1/2] fixup! pinctrl: Add provisions to control GPIO pin direction   Sascha Hauer
• [PATCH 1/3] scripts/kwbimage: fix typo   Uwe Kleine-König
• [PATCH 2/3] scripts/kwbimage: use ALIGN_SUP instead of open-coding it   Uwe Kleine-König
• [PATCH 3/3] scripts/kwbimage: fix handling of binary header   Uwe Kleine-König
• [PATCH v2 1/4] scripts/kwbimage: fix handling of binary header   Uwe Kleine-König
  • [PATCH v2 2/4] scripts/kwbimage: fix typo   Uwe Kleine-König
  • [PATCH v2 4/4] scripts/kwbimage: allow to overwrite binary   Uwe Kleine-König
  • [PATCH v2 1/4] scripts/kwbimage: fix handling of binary header   Sascha Hauer
• [PATCH v2 3/4] scripts/kwbimage: use ALIGN_SUP instead of open-coding it   Uwe Kleine-König
• [PATCH 1/3] i2c: gpio: fix handling of return code of of_get_gpio   Uwe Kleine-König
  • [PATCH 2/3] i2c: gpio: use dynamic bus number unconditionally   Uwe Kleine-König
  • [PATCH 3/3] i2c: algo-bit: remove prototype for non-existing function   Uwe Kleine-König
  • [PATCH 1/3] i2c: gpio: fix handling of return code of of_get_gpio   Sascha Hauer
• habv4 on imx6   Jan Remmet
  • habv4 on imx6   Jan Remmet
• [PATCH] docs: fix typos in memcmp help text   Moritz Warning
  • [PATCH] docs: fix typos in memcmp help text   Sascha Hauer
• [PATCH 1/2] scripts: imx imx-usb-loader: sort USB id list   Alexander Kurz
  • [PATCH 1/2] scripts: imx imx-usb-loader: sort USB id list   Sascha Hauer
• [PATCH 2/2] scripts: imx imx-usb-loader: add i.MX6SL support   Alexander Kurz
• [PATCH] ARM: i.MX25/35: Fix bootsource detection   Daniel Krüger
  • [PATCH] ARM: i.MX25/35: Fix bootsource detection   Daniel Krüger
• [PATCHv2] ARM: i.MX25/35: Fix bootsource detection   Daniel Krüger
  • [PATCHv2] ARM: i.MX25/35: Fix bootsource detection   Sascha Hauer
• [PATCH] spi: i.MX: reset controller on init   Sascha Hauer
• [PATCH] ubi: Only read necessary size when reading the VID header   Ulrich Ölmann
  • [PATCH] ubi: Only read necessary size when reading the VID header   Sascha Hauer
• [PATCH] Documentation: bootchooser: fix typos   Ulrich Ölmann
  • [PATCH] Documentation: bootchooser: fix typos   Sascha Hauer
• [PATCH 1/3] input: Fix compiler warning   Sascha Hauer
  • [PATCH 3/3] lib/int_sqrt.c: Fix compiler warning   Sascha Hauer
• [PATCH 2/3] globalvar: Make locally used function static   Sascha Hauer
• [PATCH] environment: fix typo   Ulrich Ölmann
  • [PATCH] environment: fix typo   Sascha Hauer
• [PATCH 01/10] ARM: socfpga: fix compiler warning   Sascha Hauer
  • [PATCH 04/10] globalvar: Fix compiler warning   Sascha Hauer
  • [PATCH 07/10] ARM: socfpga: fix compiler warning   Sascha Hauer
• [PATCH 02/10] nios2: Fix out of tree build   Sascha Hauer
• [PATCH 03/10] nios2: Fix compiler warning   Sascha Hauer
• [PATCH 05/10] mtd: peb: fix usage of uninitialized variable   Sascha Hauer
• [PATCH 06/10] mtd: peb: Fix format specifier   Sascha Hauer
• [PATCH 08/10] of: Use %pa to print resource_size_t type   Sascha Hauer
• [PATCH 09/10] menu: sanitize menu_add_title   Sascha Hauer
• [PATCH 10/10] arm: at91 bootstrap: Fix menu title   Sascha Hauer
• [PATCH] mtd: m25p80: add support for Everspin MR25H40   Uwe Kleine-König
• [PATCH 0/6] ubi: remove character device flag from static volumes   Teresa Remmet
  • [PATCH 2/6] devfs: Add optional truncate callback for device files   Teresa Remmet
  • [PATCH 3/6] ubi: Add truncate callback   Teresa Remmet
  • [PATCH 5/6] commands: ubi: ubiupdatevol: Open device with O_TRUNC   Teresa Remmet
  • [PATCH 6/6] ubi: barebox: Remove character device flag from static volumes   Teresa Remmet
• [PATCH 1/6] libfile: copy_file: Only open regular files with O_TRUNC   Teresa Remmet
• [PATCH 4/6] fs: Remove O_TRUNC check for devices when open files   Teresa Remmet
• [PATCH 1/2] fixup! gpio: Add GPIO driver for Vybrid   Andrey Smirnov
  • [PATCH 2/2] fixup! i.MX: Add VF610 clock tree initialization code   Andrey Smirnov
• [PATCH 1/3] ARM: dts: phycore-imx6: refactor fec nodes   Stefan Lengfeld
• [PATCH 2/3] ARM: dts: phycore-imx6: fix missing ?xc-skew-ps settings for ethphy   Stefan Lengfeld
• [PATCH 3/3] ARM: dts: phycore-imx6: remove unnecessary include   Stefan Lengfeld
• [PATCH 1/4] ARM i.MX: move cpu_type macros in front of cpu_revision code   Alexander Kurz
  • [PATCH 3/4] ARM: i.MX6SL: import clock infrastructure from linux   Alexander Kurz
• [PATCH 2/4] ARM i.MX: add SoC type detection for i.MX6SL   Alexander Kurz
• [PATCH 4/4] ARM i.MX: Add i.MX6SL support   Alexander Kurz
• UBIFS trouble   Juergen Borleis
  • UBIFS trouble   Juergen Borleis
• [PATCH 1/2] imx6qdl-phytec-phycore-som.dtsi: rename eeprom   Stefan Lengfeld
  • [PATCH 2/2] Documentation: remote-control: fix markup   Stefan Lengfeld
• [PATCH 1/3] ARM: imx: Add support for ZII RDU2 board   Lucas Stach
• [PATCH 2/3] ARM: rdu2: support QP variant   Lucas Stach
• [PATCH 3/3] ARM: rdu2: bring board support in line with other boards   Lucas Stach
• [PATCH 1/3] arm: imx6: ocotp: Added support for the i.MX6UL   Daniel Schultz
• [PATCH 2/3] arm: imx6: ocotp: Added write check   Daniel Schultz
• [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL   Daniel Schultz
  • [PATCH 3/3] arm: dts: Added ocotp support for i.MX6UL   Andrey Smirnov
• help-UBOOT2 JMP   irlinuxbox
  • help-UBOOT2 JMP   Ulrich Ölmann

Last message date: Wed Nov 30 23:52:05 PST 2016
Archived on: Wed Nov 30 23:52:33 PST 2016

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...