[PATCH v2 18/28] i.MX: i2c: Use read/write adapter functions
Andrey Smirnov
andrew.smirnov at gmail.com
Wed Nov 9 08:14:06 PST 2016
Use read/write adapter functions instead of directly calling to
readb/writeb. This is needed to prepare driver code to support Vybrid
SoC's variant of this block.
Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
---
drivers/i2c/busses/i2c-imx.c | 88 +++++++++++++++++++++++---------------------
1 file changed, 46 insertions(+), 42 deletions(-)
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index e407896..ec40475 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -115,14 +115,27 @@ struct fsl_i2c_struct {
};
#define to_fsl_i2c_struct(a) container_of(a, struct fsl_i2c_struct, adapter)
+static inline void fsl_i2c_write_reg(unsigned int val,
+ struct fsl_i2c_struct *i2c_fsl,
+ unsigned int reg)
+{
+ writeb(val, i2c_fsl->base + reg);
+}
+
+static inline unsigned char fsl_i2c_read_reg(struct fsl_i2c_struct *i2c_fsl,
+ unsigned int reg)
+{
+ return readb(i2c_fsl->base + reg);
+}
+
#ifdef CONFIG_I2C_DEBUG
static void i2c_fsl_dump_reg(struct i2c_adapter *adapter)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
u32 reg_cr, reg_sr;
- reg_cr = readb(i2c_fsl->base + FSL_I2C_I2CR);
- reg_sr = readb(i2c_fsl->base + FSL_I2C_I2SR);
+ reg_cr = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
+ reg_sr = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2SR);
dev_dbg(adapter->dev, "CONTROL:\t"
"IEN =%d, IIEN=%d, MSTA=%d, MTX =%d, TXAK=%d, RSTA=%d\n",
@@ -144,16 +157,16 @@ static inline void i2c_fsl_dump_reg(struct i2c_adapter *adapter)
}
#endif
+
static int i2c_fsl_bus_busy(struct i2c_adapter *adapter, int for_busy)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
uint64_t start;
unsigned int temp;
start = get_time_ns();
while (1) {
- temp = readb(base + FSL_I2C_I2SR);
+ temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2SR);
if (for_busy && (temp & I2SR_IBB))
break;
if (!for_busy && !(temp & I2SR_IBB))
@@ -172,12 +185,11 @@ static int i2c_fsl_bus_busy(struct i2c_adapter *adapter, int for_busy)
static int i2c_fsl_trx_complete(struct i2c_adapter *adapter)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
uint64_t start;
start = get_time_ns();
while (1) {
- unsigned int reg = readb(base + FSL_I2C_I2SR);
+ unsigned int reg = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2SR);
if (reg & I2SR_IIF)
break;
@@ -186,7 +198,7 @@ static int i2c_fsl_trx_complete(struct i2c_adapter *adapter)
return -EIO;
}
}
- writeb(0, base + FSL_I2C_I2SR);
+ fsl_i2c_write_reg(0, i2c_fsl, FSL_I2C_I2SR);
return 0;
}
@@ -194,12 +206,11 @@ static int i2c_fsl_trx_complete(struct i2c_adapter *adapter)
static int i2c_fsl_acked(struct i2c_adapter *adapter)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
uint64_t start;
start = get_time_ns();
while (1) {
- unsigned int reg = readb(base + FSL_I2C_I2SR);
+ unsigned int reg = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2SR);
if (!(reg & I2SR_RXAK))
break;
@@ -215,25 +226,24 @@ static int i2c_fsl_acked(struct i2c_adapter *adapter)
static int i2c_fsl_start(struct i2c_adapter *adapter)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
unsigned int temp = 0;
int result;
- writeb(i2c_fsl->ifdr, base + FSL_I2C_IFDR);
+ fsl_i2c_write_reg(i2c_fsl->ifdr, fsl_i2c, FSL_I2C_IFDR);
if (i2c_fsl->dfsrr != -1)
- writeb(i2c_fsl->dfsrr, base + FSL_I2C_DFSRR);
+ fsl_i2c_write_reg(i2c_fsl->dfsrr, fsl_i2c, FSL_I2C_DFSRR);
/* Enable I2C controller */
- writeb(0, base + FSL_I2C_I2SR);
- writeb(I2CR_IEN, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(0, fsl_i2c, FSL_I2C_I2SR);
+ fsl_i2c_write_reg(I2CR_IEN, fsl_i2c, FSL_I2C_I2CR);
/* Wait controller to be stable */
udelay(100);
/* Start I2C transaction */
- temp = readb(base + FSL_I2C_I2CR);
+ temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
temp |= I2CR_MSTA;
- writeb(temp, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(temp, fsl_i2c, FSL_I2C_I2CR);
result = i2c_fsl_bus_busy(adapter, 1);
if (result) {
@@ -246,7 +256,7 @@ static int i2c_fsl_start(struct i2c_adapter *adapter)
i2c_fsl->stopped = 0;
temp |= I2CR_MTX | I2CR_TXAK;
- writeb(temp, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(temp, fsl_i2c, FSL_I2C_I2CR);
return result;
}
@@ -254,14 +264,13 @@ static int i2c_fsl_start(struct i2c_adapter *adapter)
static void i2c_fsl_stop(struct i2c_adapter *adapter)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
unsigned int temp = 0;
if (!i2c_fsl->stopped) {
/* Stop I2C transaction */
- temp = readb(base + FSL_I2C_I2CR);
+ temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
- writeb(temp, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(temp, fsl_i2c, FSL_I2C_I2CR);
/* wait for the stop condition to be send, otherwise the i2c
* controller is disabled before the STOP is sent completely */
i2c_fsl->stopped = i2c_fsl_bus_busy(adapter, 0) ? 0 : 1;
@@ -273,14 +282,13 @@ static void i2c_fsl_stop(struct i2c_adapter *adapter)
}
/* Disable I2C controller, and force our state to stopped */
- writeb(0, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(0, fsl_i2c, FSL_I2C_I2CR);
}
#ifdef CONFIG_PPC
static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
unsigned int rate)
{
- void __iomem *base;
unsigned int i2c_clk;
unsigned short divider;
/*
@@ -295,7 +303,6 @@ static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
unsigned long c_div, est_div;
fdr = 0x31; /* Default if no FDR found */
- base = i2c_fsl->base;
i2c_clk = fsl_get_i2c_freq();
divider = min((unsigned short)(i2c_clk / rate), (unsigned short) -1);
@@ -387,7 +394,6 @@ static void i2c_fsl_set_clk(struct fsl_i2c_struct *i2c_fsl,
static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
int i, result;
if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
@@ -396,7 +402,7 @@ static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
__func__, msgs->addr << 1);
/* write slave address */
- writeb(msgs->addr << 1, base + FSL_I2C_I2DR);
+ fsl_i2c_write_reg(msgs->addr << 1, fsl_i2c, FSL_I2C_I2DR);
result = i2c_fsl_trx_complete(adapter);
if (result)
@@ -411,7 +417,7 @@ static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
dev_dbg(&adapter->dev,
"<%s> write byte: B%d=0x%02X\n",
__func__, i, msgs->buf[i]);
- writeb(msgs->buf[i], base + FSL_I2C_I2DR);
+ fsl_i2c_write_reg(msgs->buf[i], fsl_i2c, FSL_I2C_I2DR);
result = i2c_fsl_trx_complete(adapter);
if (result)
@@ -426,12 +432,11 @@ static int i2c_fsl_write(struct i2c_adapter *adapter, struct i2c_msg *msgs)
static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
int i, result;
unsigned int temp;
/* clear IIF */
- writeb(0x0, base + FSL_I2C_I2SR);
+ fsl_i2c_write_reg(0x0, fsl_i2c, FSL_I2C_I2SR);
if ( !(msgs->flags & I2C_M_DATA_ONLY) ) {
dev_dbg(&adapter->dev,
@@ -439,7 +444,7 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
__func__, (msgs->addr << 1) | 0x01);
/* write slave address */
- writeb((msgs->addr << 1) | 0x01, base + FSL_I2C_I2DR);
+ fsl_i2c_write_reg((msgs->addr << 1) | 0x01, fsl_i2c, FSL_I2C_I2DR);
result = i2c_fsl_trx_complete(adapter);
if (result)
@@ -450,13 +455,13 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
}
/* setup bus to read data */
- temp = readb(base + FSL_I2C_I2CR);
+ temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
temp &= ~I2CR_MTX;
if (msgs->len - 1)
temp &= ~I2CR_TXAK;
- writeb(temp, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(temp, fsl_i2c, FSL_I2C_I2CR);
- readb(base + FSL_I2C_I2DR); /* dummy read */
+ fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2DR); /* dummy read */
/* read data */
for (i = 0; i < msgs->len; i++) {
@@ -469,9 +474,9 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
* It must generate STOP before read I2DR to prevent
* controller from generating another clock cycle
*/
- temp = readb(base + FSL_I2C_I2CR);
+ temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
temp &= ~(I2CR_MSTA | I2CR_MTX);
- writeb(temp, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(temp, fsl_i2c, FSL_I2C_I2CR);
/*
* adding this delay helps on low bitrates
@@ -481,11 +486,11 @@ static int i2c_fsl_read(struct i2c_adapter *adapter, struct i2c_msg *msgs)
i2c_fsl_bus_busy(adapter, 0);
i2c_fsl->stopped = 1;
} else if (i == (msgs->len - 2)) {
- temp = readb(base + FSL_I2C_I2CR);
+ temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
temp |= I2CR_TXAK;
- writeb(temp, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(temp, fsl_i2c, FSL_I2C_I2CR);
}
- msgs->buf[i] = readb(base + FSL_I2C_I2DR);
+ msgs->buf[i] = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2DR);
dev_dbg(&adapter->dev, "<%s> read byte: B%d=0x%02X\n",
__func__, i, msgs->buf[i]);
@@ -497,7 +502,6 @@ static int i2c_fsl_xfer(struct i2c_adapter *adapter,
struct i2c_msg *msgs, int num)
{
struct fsl_i2c_struct *i2c_fsl = to_fsl_i2c_struct(adapter);
- void __iomem *base = i2c_fsl->base;
unsigned int i, temp;
int result;
@@ -514,9 +518,9 @@ static int i2c_fsl_xfer(struct i2c_adapter *adapter,
/* read/write data */
for (i = 0; i < num; i++) {
if (i && !(msgs[i].flags & I2C_M_DATA_ONLY)) {
- temp = readb(base + FSL_I2C_I2CR);
+ temp = fsl_i2c_read_reg(i2c_fsl, FSL_I2C_I2CR);
temp |= I2CR_RSTA;
- writeb(temp, base + FSL_I2C_I2CR);
+ fsl_i2c_write_reg(temp, fsl_i2c, FSL_I2C_I2CR);
result = i2c_fsl_bus_busy(adapter, 1);
if (result)
@@ -623,8 +627,8 @@ static int __init i2c_fsl_probe(struct device_d *pdev)
i2c_fsl_set_clk(i2c_fsl, FSL_I2C_BIT_RATE);
/* Set up chip registers to defaults */
- writeb(0, i2c_fsl->base + FSL_I2C_I2CR);
- writeb(0, i2c_fsl->base + FSL_I2C_I2SR);
+ fsl_i2c_write_reg(0, i2c_fsl, FSL_I2C_I2CR);
+ fsl_i2c_write_reg(0, i2c_fsl, FSL_I2C_I2SR);
/* Add I2C adapter */
ret = i2c_add_numbered_adapter(&i2c_fsl->adapter);
--
2.5.5
More information about the barebox
mailing list