[PATCH 1/3] ARM: dts: phycore-imx6: refactor fec nodes

[Stefan Lengfeld]

Refactor the common settings for device tree node 'fec' into the generic
phycore i.MX6 device tree file. This avoid redundant settings and makes
common fixes easier. Our kernel device tree files have the same layout.

Signed-off-by: Stefan Lengfeld <s.lengfeld at phytec.de>
---
 arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts | 17 ++++-------------
 arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts | 17 ++++-------------
 arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts  | 17 ++++-------------
 arch/arm/dts/imx6q-phytec-phycore-som-nand.dts  | 17 ++++-------------
 arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi    | 13 +++++++++++++
 5 files changed, 29 insertions(+), 52 deletions(-)

diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
index fc153a6..bffee5f 100644
--- a/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-emmc.dts
@@ -29,21 +29,12 @@
 	status = "okay";
 };
 
+&ethphy {
+	max-speed = <100>;
+};
+
 &fec {
 	status = "okay";
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 14 1>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy at 3 {
-			reg = <3>;
-			max-speed = <100>;
-		};
-	};
 };
 
 &flash {
diff --git a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
index 3f2f1c7..1b66fda 100644
--- a/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6dl-phytec-phycore-som-nand.dts
@@ -24,21 +24,12 @@
 	status = "okay";
 };
 
+&ethphy {
+	max-speed = <100>;
+};
+
 &fec {
 	status = "okay";
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 14 1>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy at 3 {
-			reg = <3>;
-			max-speed = <100>;
-		};
-	};
 };
 
 &gpmi {
diff --git a/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts b/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts
index 74bc09b..ecc5aa3 100644
--- a/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts
+++ b/arch/arm/dts/imx6q-phytec-phycore-som-emmc.dts
@@ -28,21 +28,12 @@
 	status = "okay";
 };
 
+&ethphy {
+	max-speed = <1000>;
+};
+
 &fec {
 	status = "okay";
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 14 1>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy at 3 {
-			reg = <3>;
-			max-speed = <1000>;
-		};
-	};
 };
 
 &flash {
diff --git a/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts b/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
index aa2c94a..9ad7eda 100644
--- a/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
+++ b/arch/arm/dts/imx6q-phytec-phycore-som-nand.dts
@@ -29,21 +29,12 @@
 	status = "okay";
 };
 
+&ethphy {
+	max-speed = <1000>;
+};
+
 &fec {
 	status = "okay";
-	phy-handle = <&ethphy>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 14 1>;
-
-	mdio {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy at 3 {
-			reg = <3>;
-			max-speed = <1000>;
-		};
-	};
 };
 
 &flash {
diff --git a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
index d446a5e..9649817 100644
--- a/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -10,6 +10,7 @@
  */
 
 #include "imx6qdl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	chosen {
@@ -76,7 +77,19 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy at 3 {
+			reg = <3>;
+		};
+	};
 };
 
 &gpmi {
-- 
1.9.1