[PATCH 3/5] PCI: align address range before scanning bridge
Lucas Stach
l.stach at pengutronix.de
Tue Nov 1 01:58:53 PDT 2016
Otherwise we may end up with a too low base address and push
requests for the upstream bus onto the downstream side.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
---
drivers/pci/pci.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index eb3ce0f3211a..19cda1f145bc 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -252,6 +252,7 @@ static void prescan_setup_bridge(struct pci_dev *dev)
if (last_mem) {
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+ last_mem = ALIGN(last_mem, SZ_1M);
pci_write_config_word(dev, PCI_MEMORY_BASE,
(last_mem & 0xfff00000) >> 16);
cmdstat |= PCI_COMMAND_MEMORY;
@@ -259,6 +260,7 @@ static void prescan_setup_bridge(struct pci_dev *dev)
if (last_mem_pref) {
/* Set up memory and I/O filter limits, assume 32-bit I/O space */
+ last_mem_pref = ALIGN(last_mem_pref, SZ_1M);
pci_write_config_word(dev, PCI_PREF_MEMORY_BASE,
(last_mem_pref & 0xfff00000) >> 16);
cmdstat |= PCI_COMMAND_MEMORY;
@@ -270,6 +272,7 @@ static void prescan_setup_bridge(struct pci_dev *dev)
}
if (last_io) {
+ last_io = ALIGN(last_io, SZ_4K);
pci_write_config_byte(dev, PCI_IO_BASE,
(last_io & 0x0000f000) >> 8);
pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
--
2.10.1
More information about the barebox
mailing list