[PATCH] i2c-mux-pca954x: Add code to control reset line

[Sascha Hauer]

On Tue, Nov 15, 2016 at 06:46:45AM -0800, Andrey Smirnov wrote:
> Most recent device tree binding for that mux support specifying a GPIO
> connected to a reset line of that chip. Add code to handle that binding
> in order to be able to use the chip on boards that leverage
> aforementioned functionality.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov at gmail.com>
> ---
>  drivers/i2c/muxes/i2c-mux-pca954x.c | 7 +++++++
>  1 file changed, 7 insertions(+)

Applied, thanks

Sascha

> 
> diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
> index baeae7b..0d5515b 100644
> --- a/drivers/i2c/muxes/i2c-mux-pca954x.c
> +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
> @@ -45,6 +45,8 @@
>  #include <i2c/i2c-algo-bit.h>
>  #include <i2c/i2c-mux.h>
>  #include <init.h>
> +#include <gpio.h>
> +#include <of_gpio.h>
>  
>  #define PCA954X_MAX_NCHANS 8
>  
> @@ -179,6 +181,7 @@ static int pca954x_probe(struct device_d *dev)
>  	int num, force;
>  	struct pca954x *data;
>  	int ret = -ENODEV;
> +	int gpio;
>  
>  	data = kzalloc(sizeof(struct pca954x), GFP_KERNEL);
>  	if (!data) {
> @@ -188,6 +191,10 @@ static int pca954x_probe(struct device_d *dev)
>  
>  	i2c_set_clientdata(client, data);
>  
> +	gpio = of_get_named_gpio(dev->device_node, "reset-gpios", 0);
> +	if (gpio_is_valid(gpio))
> +		gpio_direction_output(gpio, 1);
> +
>  	/* Read the mux register at addr to verify
>  	 * that the mux is in fact present.
>  	 */
> -- 
> 2.5.5
> 
> 
> _______________________________________________
> barebox mailing list
> barebox at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |