Configure RAM size on iMX53 board

[Sascha Hauer]

On Wed, Nov 09, 2016 at 05:23:10AM +0100, Jose Luis Zabalza wrote:
> There is no form of detection. UBoot (a very old version) don't use
> any CS1 address, except with the memtest command.
> If memtest command is executed with 512MB version, UBoot hangs, as expected.
> I set the mem kernel parameter using a environment variable and kernel
> can reach CS1 memory.

Then you could drop the CS1 setup from the DCD table and do the same.
You can then create a command or similar which initializes the CS1
memory and registers the new memory bank.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |